System information

Endurance Manager 4-35
Knowing the base speed of each path allows Endurance to properly schedule message
traffic. These settings are used separately from the Shared Bandwidth setting. In some
cases it may be necessary to manually specify both a Shared Bandwidth setting as well as
specific speeds for each CoServer Link.
Dynamic Latency Measurement
Endurance periodically measures transmission latency across the CoServer Link paths in
order to determine the best route for its most latency-sensitive messages. In most networks,
this determination is sufficient. It is recommended that this feature be enabled. The ability
to disable this feature is present mainly as a troubleshooting aid.
Examining CoServer Link Properties and Status
You can examine the current status and properties of the CoServer Links by accessing the
CoServer Link Component Properties page. To do this, access the Components Properties
window on the Endurance Manager through the View Properties... Then browse the
components tree view and click on the CoServer Link entry as shown below: