System information

Endurance Manager 4-33
Managing CoServer Link Communications
Endurance uses default assumptions and policies regarding CoServer Link configuration,
bandwidth, and latencies in order to optimize load balancing of synchronization and mirroring
traffic. In most configurations, Endurance will automatically detect and correctly set default
settings to optimize the CoServer Links. However, in certain configurations it may not be
possible to automatically detect network configuration topology or characteristics. In that case,
it will be necessary to override the default values used by Endurance. This chapter describes
how to modify the CoServer link settings.
Optimizing CoServer Link Communications
You can optimize CoServer Link operations for the specific network configuration by adjusting
settings within the Path Optimization Component Properties page. To view this page, access
the Components Properties window on the Endurance Manager through the View
Properties... Then browse the components tree view, expand the CoServer Link entry and
click on Path Optimization. The following window will appear:
You can modify the following properties on this page to reflect your network environment and
optimize Endurance load balancing.