System information

Endurance Manager 4-29
Input Devices States
The FTvirtual Server input devices consist of a set of physical CoServer keyboard and mouse
devices from each CoServer (for example CoServer1.Keyboard1 and CoServer2.Keyboard1,
CoServer1.Pointer1 and CoServer2.Pointer1).
The FTvirtual Server keyboard and mouse devices can report the states described in Table 4-14:
Table 4-14 Input Devices States
State
FTvirtual Server
Description
CoServer Description
Degraded One of the input devices is
usable, but the other one is not.
Failed This FTvirtual Server is active
and neither physical device is
usable.
Both devices are Failed, and
the FTvirtual Server is shut
down.
The physical device has
experienced a failure. It is no
longer usable and requires
repair.
Good The device is fully operational.
Good/FTvirtual Server Input The device is usable, and input
is redirected to the FTvirtual
Server.
Good/CoServer Input The input device is usable, and
the input is redirected to the
CoServer.
Offline Both physical input devices are
not usable because they are
Offline, or Unknown while the
FTvirtual Server was shut
down.
The device is not available for
use because the CoServer to
which it is attached is in a
Failed, Disabled or Offline state
or because the device is not
connected, not properly
configured, or otherwise not
functional.
Unknown The CoServer to which the
physical input device is
attached cannot be accessed.
This can be caused by the loss
of communication between the
two CoServers when one
CoServer is shut down.