System information

4-28 Endurance FTvirtual Server Administrator’s Guide
Offline Both physical adapters are not
usable because they are Disabled,
Offline, or Unknown while the
FTvirtual Server was shut down.
The adapter is not available for use.
This could be because the CoServer to
which it is attached is in a Failed,
Disabled, or Offline state or because
the adapter is not properly configured.
Offline/
Disconnected
The adapter is not available for use.
This could be because the network
cable is disconnected or the switch/hub
to which the adapter is cabled to has
been powered off.
Unknown The CoServer to which the physical
adapter is attached cannot be
accessed. This can be caused by the
loss of communication when one
CoServer is shut down.
Good/Disconnected The adapter becomes available when
the cable is reconnected.
Degraded/
Segmented Active
The adapter is usable and is designated
as the active adapter. However, there
is no connectivity to the standby
adapter
Degraded/
Segmented Standby
The adapter is usable and is designated
as the standby adapter. However, there
is no connectivity to the active adapter
Table 4-13 Ethernet Adapter States
State
FTvirtual Server Ethernet
Adapter Description
CoServer Ethernet Adapter
Description