Product Manual

Inflation Instructions (Pneumatic Tire)
6.
You will need: Manual Pump, Gloves and Eye Protection.
Safety Warning:
Inflation over 30PSI may cause serious injury / explosion. Never use air compressor.
Inflate with manual pump only. Max inflation 30 PSI. Never overfill your tire.
Step One:
Put on your gloves and eye
protective-wear.
Remove any weight from the
tire. Do not fill the tire when it’s
on the wheelbarrow.
Step Two:
Inspect tire and rim for any
possible defects. If you see any,
don’t fill the tire.
1
2
Step Three:
Remove the cap from the valve
stem and connect the tire pump
to the valve stem. Make sure you
follow the tire pump instructions.
Use manual pump to pump up
the tire and keep a good eye on
the pressure gauge. Don’t go
over the tire’s max. 30 PSI.
Step Four:
Disconnect the tire pump from
the tire. Set tire pump aside and
put cap back on the tire.
Your tire is ready to go.
3 4
Videos:
For a demonstration video, please visit the
following link:
http://youtu.be/33lKdW0uKjs
Do not inflate tire over 30 PSI.
!