Tire Manual Northern Tool Item #: 189412 Marathon Part #: 32003 Description: Flat Free, 3.50/2.
Contents Safety Information................... 3 Customer Service..................... 3 Tire Spec. Information............. 4 Tire Uses................................... 4 Installation Instructions.......... 5 Bearing Replacement..............
1. Safety Information Use gloves to install Wear safety glasses ! Not for highway use. Customer Service If you have any questions regarding this product, please don’t hesitate to contact us. Toll Free 877-425-1640 253-893-7021 Online Email: sales@marathonind.com Website: www.marathonind.
2. Tire Spec. Information Northern Tool Item #: 189412 Marathon Part #: 32003 Description: Flat Free, 3.50/2.50-8” ribbed; 5/8” bearing bore; 6” hub 3.20” Tire Width 5/8” Ball Bearings Powder coated 8” welded steel Rim 13.22” Wheel Diameter 3.00” Sidewall Height 6.
3. Installation Instructions Note: These installation instructions apply for installation on most standard wheelbarrows. For installation on other equipment, please see original equipment manufacturer’s manual. You will need: Crescent Wrench, New Wheelbarrow Tire, Gloves and Eye Protection 1 Step One: Put on your gloves and eye protective-wear. Use your crescent wrench to unscrew the axle brackets that attach the axle to the wheelbarrow. Remove brackets on both sides (Fig. 1).
4. Bearing Replacement You will need: hammer, screwdriver, block of wood, replacement bearings, gloves and eye protection. 1 3 Step One: Prop the tire up to allow room for the bearings to be removed from the hub. For example, you may use a bucket. Step Three: Hit the top of the screwdriver with a hammer until the bearing pops out into the bucket below (Fig. 1). 2 4 6 Fig.
Toll Free 877-425-1640 253-893-7021 Email: sales@marathonind.com Website: www.marathonind.
