R Model VP8100 User Guide Video Projector
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning symbol in the triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
IMPORTANT SAFETY INSTRUCTIONS READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operational precautions which you should be particularly aware of. 1. Read Instructions: All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions: The safety and operating instructions should be retained for future reference. 3.
18. Servicing: Do not attempt to service this video product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to a qualified service personnel. 21. Safety Check: Upon the completion of any service or repairs to this video product, ask a service technician to perform safety checks to determine that the video product is in proper operating condition. 19.
ENGLISH TABLE OF CONTENTS INTRODUCTION SET UP PROCEDURES OPERATIONS ADDITIONAL INFORMATION FEATURES ..................................................................................................................... 2 PROJECTOR LAYOUT AND FUNCTIONAL OVERVIEW ............................................... 3 Front and Top .................................................................................................... 3 Connector panel and Rear ......................................................
FEATURES Excellent video quality Sophisticated Design • The MARANTZ progressives scan (3D motion adaptive line doubling) technology provides natural and clear video quality. • The MARANTZ 3D-Y/C separation technology ensures clear screen image without blur in color. • The Marantz Two to Three Pull Down film detection technology ensures to depict the most natural moments of objects projected in the recorded film format.
INTRODUCTION ENGLISH PROJECTOR LAYOUT AND FUNCTIONAL OVERVIEW Front and Top !2 !3 o !0 y !3 VP8100 t !3 w INPUT t R ENTE U MEN DBY STAN ING WARN E POW R U L R D A TEXAS INSTRUMENTS TECHNOLOGY wer q u i !3 !1 q !1 The 쑿/쑼/씱/씰 keys q IR sensor (one for each front and rear) Control the menu cursor. Press the 쑿 key for more than three seconds to turn the HIGH BRIGHT mode on. Press the 쑼 key to turn the HIGH BRIGHT mode off. w Lens e Focus ring Adjust the picture focus.
INTRODUCTION m, v z TRIG.1 TRIG.2 RGB IN Y PB/CB OUT . x PR/CR COMPONENT VIDEO IN EXT. INT. ENGLISH Connector panel and Rear IN S-VIDEO IN VIDEO IN REMOTE CONTROL b n c ⁄0 ⁄0 ⁄3 ⁄4 ⁄2 ⁄1 ⁄2 ⁄0 z COMPONENT VIDEO IN , TRIG.2 OUT Y, PB/CB, PR/CR connectors. Connect to the COMPONENT VIDEO output of video equipment or an A/V processor/receiver with a component video loop. Either A 12-volt signal or a 0-volt signal is sent to the equipment connected to the TRIG.
INTRODUCTION Bottom ENGLISH w t r q e e r q Lamp cover w Lamp cover securing screw e Adjuster r Ventilation hole t Rear adjuster Adjusters How to use adjuster, adjuster button, and rear adjuster.
INTRODUCTION Select the THEATER picture mode. The key toggles between THEATER1, THEATER2, THEATER3 and THEATER STD. ⁄1 NORMAL key STANDBY x POWER ON v COMPONENT S-VIDEO ENTER VIDEO RGB MENU THEATER NORMAL DYNAMIC b n ⁄0 OSD FULL SQUEEZE 2–3 P/D 4:3 ZOOM B-LIGHT P-SHIFT V-MUTE ⁄3 ⁄6 z Select the DYNAMIC picture mode. The key toggles between DYNAMIC1, DYNAMIC2, DYNAMIC3 and DYNAMIC STD. , ⁄3 OSD key When the key is pressed, projector setting information is displayed.
INTRODUCTION Preparing the Remote Controller ENGLISH 1. Open the cover. CAUTION – Do not mix old and new batteries, and never mix different types of batteries (standard, alkaline and so on). – If the user does not intend to use the Remote Controller for a long time, remove the batteries. – Do not be subjected to strong shock. – Do not be subjected to moisture. If moisture gets the unit, wipe it off immediately. – Keep away from heat. – The effect range of the Remote Controller is approximately 6m.
SET UP PROCEDURES ENGLISH INSTALLATION Floor Installation Horizontal center of the screen Vertical positioning Height Side view Projecting distance Adjust the vertical and horizontal position of the projector. INPUT ENTER MENU STANDBY U WARNING POWER L R D A TEXAS INSTRUMENTS TECHNOLOGY Horizontal positioning Top view Ceiling Installation For ceiling installation, consult with Marantz dealer.
SET UP PROCEDURES Distance between the projector and the screen (throw distance) ENGLISH Screen Screen size (Diagonal) Height TRIG.1 TRIG.2 RGB IN Y PB/CB PR/CR COMPONENT VIDEO IN EXT. INT.
SET UP PROCEDURES • Press the 4:3 key or the ZOOM key on the remote controller for the 4:3 aspect ratio video source. • Press the FULL key on the remote controller for 16:9 aspect ratio video source. 쏋 ZOOM mode 쏋 4:3 mode 4:3 video source 4:3 video source 쏋 SQUEEZE mode 쏋 FULL mode 4:3 video source 16:9 video source The Screen Images in a 4:3 Screen • Press the FULL key on the remote controller for both 4:3 and 16:9 aspect ratio video sources.
SET UP PROCEDURES ENGLISH INSTALLING Standard Connections Connections with VIDEO EQUIPMENT COMPONENT VIDEO OUT DVD TRIG.1 TRIG.2 RGB IN Y PB/CB PR/CR COMPONENT VIDEO IN EXT. INT. OUT IN S-VIDEO IN VIDEO IN REMOTE CONTROL S-VIDEO OUT VIDEO OUT VCR Connection with a PC TRIG.1 TRIG.2 RGB IN Y PB/CB PR/CR COMPONENT VIDEO IN EXT. INT.
INITIAL SET UP TO TURN OFF THE POWER 1. Connect the supplied AC power cord. 1. Press the STANDBY key on the remote controller or the The STANDBY indicator will light in green and the projector goes into the standby mode. POWER key on the projector. 2. The fan continues to run for a while to reduce internal heat. 2. Press the POWER ON key on the remote controller or the The POWER key flashes green and no key will be effective.
OPERATIONS ENGLISH OPERATIONS Menu Picture Adjust Refer to the on-screen menu for making various adjustments and settings. The user can adjust the picture to suit own preference by using the PICTURE ADJUST feature. 1. Press the MENU key. 1. Use the 씱/씰 keys to select an item. The menu display appears. 2. Use the 쑿/쑼 keys to change the adjustment level. THEATER To increase the number, press the 쑿 key. To decrease the number, press the 쑼 key.
OPERATIONS – 2-3 P/D Setting 1. Use the 쑿/쑼 keys to select an item. – COMPONENT When set to AUTO, a video system is automatically selected as either NTSC, 480p, 720p, or 1080i. When AUTO does not work out, select an appropriate system from either NTSC, 480p, 720p, or 1080i. 2. Use the 씱/씰 keys to change the setting SETTING ASPECT TRIG.
씰 When the lamp life has expired (LAMP LIFE 0 HOURS), the unit will be immediately turned off, and the WARNING indicator will blink in orange. Lamp Life and Replace Lamp ENGLISH LAMP LIFE The user can display the remaining lamp life at any time by pressing the OSD key on the remote controller. LAMP LIFE is displayed at the very bottom of the menu. WARNING LAMP VIDEO INPUT VIDEO SETTING 2-3 P/D NOISE REDUCTION WHITE ENHANCER ASPECT TRIG.
MAINTENANCE Replacing the Lamp Unit Cleaning the lens If the lens becomes dirty or smudged, clean it with a soft dry cloth. Do not use a dampcloth, detergent solution, or thinner. It may remain as stains. Use optical lens cleaners only which are approved for eyeglasses or cameras. CAUTION: • Do not touch the lamp and the lamp unit. It will be extremely hot. Allow at least one hour for the lamp to cool down before handling. • Do not loosen any screws except for those mentioned below.
ENGLISH TROUBLESHOOTING If the unit does not operate properly, check the items shown in the following table. If any trouble cannot be solved by the recomendatin below, malfunction of the internal circuitry is suspected; immediately unplug the AC power cord and contact the Marantz dealer or service center. In case of troubles, check the following before calling for service: 1. Are the connections made properly ? 2.
SPECIFICATIONS 쏋 Optical characteristics 쏋 GENERAL Panel Power requirement Power consumption Stand by consumption Chassis isolation AC 100-120 V / 220-240 V, 50 / 60 Hz <200 W <6 W Class-1 Safety EMI/EMC UL1950 CAN/CSA C22.1 No.
쐽 FRONT 쐽 TOP 322 (12 11/16) 96 (3 3/4) 12 ( / ) 84 (3 / ) 5 16 235 (9 1/4) 181.5 (7 1/8) 1 2 INPUT ENTE MEN ND STA POW ER R U BY N WAR ING U L R D A TEXAS INSTRUMENTS TECHNOLOGY VP8100 53.5 (2 1/8) 15.8 (5/8)*1 쐽 SIDE 46.5 (1 13/16) ENGLISH DIMENSIONS Unit: mm (inches) *1 It depends on the focus adjustment position and the zoom adjustment position.
COUNTRY ALGERIE ARMENIA AUSTRALIA AUSTRIA BAHREIN BANGLADESH BELGIUM BULGARIA CANADA CYPRUS CZECH REPUBLIC DENMARK DUBAI EGYPT ESTONIA F.Y.R.O.M. FINLAND FRANCE GERMANY GREECE HEADQUARTERS EUROPE: HONG KONG HUNGARY ICELAND INDIA IRAN IRELAND ISRAEL ITALY IVORY COAST JAPAN KOREA KUWAIT LATVIA LEBANON LITHUANIA MALAYSIA MALTA MAURITIUS MILITARY MARKET EUROPE NETHERLANDS NEW ZEALAND NORWAY OMAN POLAND PORTUGAL PROFESSIONAL EUROPE PROFESSIONAL U.S.A.
