R Model SR9300 User Guide AV Surround Receiver
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
IMPORTANT SAFETY INSTRUCTIONS READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of. 1. Read Instructions – All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions – The safety and operating instructions should be retained for future reference. 3.
20. Servicing – Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 21. Damage Requiring Service – Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power-supply cord or plug is damaged. b. If liquid has been spilled, or objects have fallen into the product. c.
FEATURES .................................................... 2 BASIC OPERATION (PLAY BACK) ............ 37 AMPLIFIER FEATURES ........................................................................ 2 AUDIO/VIDEO FEATURES .................................................................... 2 FLEXBILITY FEATURES ....................................................................... 2 OTHER FEATURES ............................................................................... 2 DESCRIPTION ............
ENGLISH FEATURES FLEXBILITY FEATURES AMPLIFIER FEATURES FUTURE-PROOF INTERFACE ARCHITECTURE a versatile RS232 port allows the SR9300’s internal Flash Memory to be directly computer accessed for installing such future upgrades as new DSP algorithms, new surround formats/parameters, and other types of processing updates. • THX Ultra certified 7ch amplifiers have enough power for even the most difficult conditions found in large rooms.
THX® is an exclusive set of standards and technologies established by the world-renowned film production company, Lucasfilm Ltd. THX resulted from George Lucas’ desire to reproduce the movie soundtrack as faithfully as possible both in the movie theater and in the home theater. THX engineers developed patented technologies to accurately translate the sound from a movie theater environment into the home, correcting the tonal and spatial errors that occur.
ENGLISH • Neo 6 technology allows various sound elements within a channel or channels to be steered separately, and in a way which follows naturally from the original presentation. • Neo 6 offers a music mode to expand stereo nonmatrix recordings into the five- or six-channel layout, in a way which does not diminish the subtlety and integrity of the original stereo recording. DTS-ES Extended Surround is a new multi-channel digital signal format developed by Digital Theater Systems Inc.
@6 qw ENGLISH FRONT PANEL @7 e rtyu i o !0 !1 !2 AV SURROUND RECEIVER SR9300 VOLUME SELECTOR DOWN DISPLAY SELECT ENTER STANDBY LD CLEAR MEMO DVD DOWN DSS TV GYRO TUNING VCR 1 MULTI-SPK SLEEP S-DIRECT AUX1 MULTI ROOM A/D 7.
ENGLISH !4 MUTE button @5 PHONES jack for stereo headphones Press this button to mute the output to the speakers. Press it again to return to the previous volume level. This jack may be used to listen to the SR9300’s output through a pair of headphones. Be certain that the headphones have a standard 1 / 4" stereo phone plug. Note that the main room speakers will automatically be turned off when the headphone jack is in use.
as d DISP ST PRO LOGIC CINEMA MOVIE fgh ANALOG MUSIC MUSIC PRO LOGIC ATT DIGITAL AUTO TUNED AUTO SURR COPY DIRECT TEST THX SURR EX NIGHT DISC 6.1 MTX 6.1 SLEEP PEAK j ENGLISH FL DISPLAY k OTHER PCM L C R LFE DIGITAL SURROUND 96kHz SL OTHER PCM L S SR C R MULTI SLEEP M-SPKR ¡0 l ¡1 ¡2 ¡3 DISP ST PRO LOGIC CINEMA MOVIE ¡4 ¡5 ANALOG MUSIC MUSIC PRO LOGIC ATT DIGITAL AUTO TUNED DIRECT TEST AUTO SURR COPY THX SURR EX NIGHT DISC 6.1 MTX 6.
ENGLISH ¡2 AUTO.SURR (Auto Surround mode) indicator. This indicator illuminates to show that the AUTO SURROUND mode is in use. ¡3 THX SURR EX (THX Surround EX mode) indicator. When THX surround EX mode is selected , this indicator lights. ¡4 DTS-ES mode indicators (DISC6.1, MTX6.1) These indicators will show to DTS-ES decoding mode. ¡5 PEAK indicator This indicator is a monitor for an analog audio input signal.
z x cv b n m , . OPT 1 MODEL NO.SR9200 MONI. 2 PRE OUT MAIN IN MULTI ROOM LEFT LEFT L MULTI VIDEO OUT MONI. 1 R COAX Y LD CB DVD CR DSS Y TV CB IN CR MONITOR OUT + – FRONT GND ANTENNA 2 ⁄0 + – DIGITAL-OUT ENGLISH REAR PANEL FRONT MULTI RIGHT ROOM RIGHT SURR. BACK CENTER GND 3 C AM LEFT 4 RS232C SW R 5 SL FRONT SR SURR. SBL SURR. BACK L DSS IN CD VCR2/ DVD-R IN SURR. SURR. BACK LEFT RIGHT EXT.
, COMPONENT VIDEO INPUT/OUTPUT ENGLISH If your DVD player or other device has component video connectors, be sure to connect them to these component video connectors on the SR9300. The SR9300 has four component video input connectors to obtain the color information (Y, CB, CR) directly from the recorded DVD signal or other video component and one component video output connector to output it directly into the matrix decoder of the display device.
J ˆ button This chapter describes the functions which control the SR9300. Please look at the user guide of the RC3200A for operation instructions. K Serial port Press this button turns on the backlight to LCD display. To connect the RC3200A with your computer by attached serial cable for future upgrades. 12 L LCD touch scren 11 ˆ ENGLISH REMOTE CONTROL UNIT RC3200A The LCD touch screen is divided into different sections: Here the date and time are displayed when you are operating your devices.
ENGLISH ACTIVATING THE RC3200A OPERATING DEVICES When the RC3200A is switched on for the first time or when it is reset, the Introduction screen appears for a few seconds. The RC3200A then automatically switches to the HOME screen that displays all available devices on your RC3200A. You can return to this HOME screen from within other screens by pressing the HOME button. See “Activating the HOME screen” for more details. To operate devices on your RC3200A you have to switch to the HOME screen.
INPUT SELECT 2 AMP PAGE 3/8 ENGLISH OPERATING AMP & TUNER To control the SR9300 by your RC3200A, you have to select the device AMP or TUNER on HOME screen. MAIN AMP PAGE 1/8 Tape, LD, AUX1, AUX2, VCR2, CD-R These buttons are used for selecting an input source.(see page 37) A/D button This button is used to select the Auto digital input, fixed digital input or analog input.
ENGLISH SURROUND MODE 1 MULTI ROOM AMP PAGE 5/8 AMP PAGE 8/8 AUTO, S-DIRECT, Mono, Stereo, M-Stereo(Multi channel stereo), Virtual, hall, matrix, Movie. These buttons are used to select surround mode.(see page 39, 40) On/Off These buttons are used to switch the unit to multi room mode. SURROUND MODE 2 Mute This button is used to mute the sound to multi room system temporarily. AMP PAGE 6/8 Volume + and – These buttons are used to adjust the sound level to multiroom system.
SHOW THE STATUS OF SR9300 ON THE LCD OF RC3200A RC3200 has 2way communication with SR9300, it shows some status screen for SR9300. 1/2 Status To show 1st page of status screen, press S button . ENGLISH TUNER PAGE 2/3 Frequency Direct button This button is used to select the mode of frequency direct input. Stereo/Mono button This button is used to select the FM tuning mode, auto stereo or mono.
ENGLISH WORKING WITH MODES ADJUSTING THE SETTINGS RC3200A starts up in Use mode. In this mode you operate your devices. For customizing the RC3200A (adjusting the settings, learning buttons or recording macros) you have to switch to the appropriate mode. The RC3200A settings can be adjusted in the Setup mode. Note • When switching between modes you will always return to the last active screen. The RC3200A can be put into 4 different modes. These modes are: Use mode: For operating your devices.
1. Tap the Revert button. A message screen appears to confirm or cancel the revert process. 2. Press OK or Cancel. On the second setup page you can adjust: • the date; • the time. Adjust the Date You can set the year, the month and the day in the date settings. Press “+” to increase or “–” to decrease the value for the year, month and day. 1. Tap “+” or “–” once to adjust the year, month and day one value up or down. 2.
7. LEARNING COMMANDS OK NO GOOD Top View DVD remote control unit Top View RC3200A RC3200A H M OK Ex H S M OK Ex S ENGLISH If an IR code or a brand is not in the database, you can program RC3200A commands by transmitting IR signals from your existing remote controls to RC3200A's learning eye. To do this, place RC3200A and the device's remote control on a flat surface, 1 to 4 inches (2 to 10 cm) apart.
Tap Macro button. Macro screen appears. 4. Press and hold the Mode button for 3 seconds. The Mode screen appears. Tap Macro on the Mode screen. A message screen appears. RC3200A is now in Macro Mode. 5. 6. Tap Next. The device screen with the Macro label appears. 8. Tap Start. The HOME screen appears with the 'Recording' label at the top of the screen. The buttons you tap on this screen will not be recorded.
13. Press Stop to stop recording. A message screen appears. RC3200A EDIT ENGLISH If you want to personalize your RC3200A even more beyond its standard programming features, RC3200edit is the tool for you to use. You can find more information and updates of the software on http:// www.marantz.com. RC3200edit is the visual editor for creating and configuring RC3200A Configuration Files (NCF) on your computer. An NCF is a file that is used to define the RC3200A behaviour and look for the LCD touch screen.
Take care not to scratch the touch screen Use your finger to tap the LCD touch screen or use plastic-tipped pens intended for use with touch screens. Never use an actual pen, pencil or other sharp object on the LCD touch screen. Protect RC3200A from extreme temperatures Keep RC3200A away from heaters and other heat sources. ENGLISH IMPORTANT NOTICES RC3200A is not waterproof RC3200A should not be exposed to rain or moisture. Do not store or use RC3200A in any location that is extremely damp or wet.
HEIGHT OF THE SPEAKER UNITS CONNECTIONS ENGLISH Front left and right speakers, and a center speaker Align the tweeters and mid-range drivers on the three front speakers on the same height as well as possible. SPEAKER PLACEMENT The ideal surround speaker system for this unit is 7-speaker systems, using front left and right speakers, a center speaker, surround left and right speakers, a surround back and a subwoofer.
FRONT LEFT RIGHT CENTER + – DIGITAL-OUT OPT 1 MODEL NO.SR9300 MONI. 2 PRE OUT MAIN IN MULTI VIDEO OUT MONI. 1 Y LD CB DVD CR DSS Y TV CB IN CR ANTENNA 2 + – FRONT MULTI LEFT ROOM LEFT GND L R COAX MONITOR OUT ENGLISH CONNECTING SPEAKERS FRONT MULTI RIGHT ROOM RIGHT GND 3 C AM 4 RS232C SW R 5 SL FRONT SR SURR. SBL SURR. BACK L DSS IN CD SURR. VCR2/ DVD-R IN BACK LEFT CENTER SURR. SURR. BACK LEFT RIGHT EXT.
CONNECTING THE AUDIO COMPONENTS ENGLISH OUT OUT IN OUT L L L L R R R R CD PLAYER SACD PLAYER L R L R R L R L TAPE DECK L R R L L R R L MD PLAYER + – DIGITAL-OUT OPT MODEL NO.SR9300 MONI. 2 PRE OUT MAIN IN L MULTI VIDEO OUT MONI. 1 Y LD CB DVD CR DSS Y ANTENNA 2 R COAX MONITOR OUT + – FRONT MULTI LEFT ROOM LEFT GND 1 FRONT MULTI RIGHT ROOM RIGHT SURR. BACK CENTER GND 3 DIGITAL INPUT C AM LEFT 4 RS232C SW R 5 SL FRONT SR SURR. SBL SURR.
CONNECT TO THE VIDEO JACKS DVD PLAYER AUDIO VIDEO OUT OUT AUDIO VIDEO OUT OUT SATTELITE TUNER L R L R LD PLAYER AUDIO VIDEO OUT OUT L R L R AUDIO VIDEO OUT OUT ENGLISH CONNECTING VIDEO COMPONENTS L R L R R L R L L R L R TV + – DIGITAL-OUT OPT MODEL NO.SR9300 MONI. 2 PRE OUT MAIN IN L MULTI VIDEO OUT MONI. 1 Y LD CB DVD CR DSS Y ANTENNA 2 R COAX R L MONITOR OUT + – FRONT MULTI LEFT ROOM LEFT GND 1 R L FRONT MULTI RIGHT ROOM RIGHT SURR.
CONNECT TO THE MONITOR AND VIDEO CAMERA ENGLISH VIDEO IN S-VIDEO IN VIDEO IN S-VIDEO IN COMPONENT VIDEO IN Y CB CR VP8100 VIDEO PROJECTOR Y CB CR MONITOR MONITOR Y CB CR S-VIDEO VIDEO L AUDIO R OPT MODEL NO.SR9300 MONI. 2 PRE OUT MAIN IN 1 R 2 L MULTI VIDEO OUT R COAX MONI.
ENGLISH ADVANCED CONNECTING CONNECTING MULTI CHANNEL AUDIO SOURCE DIGITAL OUTPUT DIGITAL OUTPUT SATTELITE TUNER LD PLAYER + – DIGITAL-OUT OPT MODEL NO.SR9300 MONI. 2 PRE OUT MAIN IN + – FRONT MULTI LEFT ROOM LEFT GND 1 L MULTI VIDEO OUT MONI. 1 Y LD CB DVD CR DSS Y ANTENNA 2 R COAX MONITOR OUT FRONT MULTI RIGHT ROOM RIGHT SURR. BACK CENTER GND DIGITAL OUTPUT 3 C AM LEFT 4 RS232C SW R 5 L CD FRONT SL SURR. DSS IN TV CB IN CR SURR.
CONNECTING THE ANTENNA TERMINALS ENGLISH AM EXTERNAL ANNTENNA AM LOOP ANNTENNA FM EXTERNAL ANNTENNA FM FEEDER ANNTENNA + – DIGITAL-OUT OPT MODEL NO.SR9300 MONI. 2 PRE OUT MAIN IN 1 MULTI VIDEO OUT MONI. 1 Y LD CB DVD CR DSS Y ANTENNA 2 R COAX MONITOR OUT + – FRONT MULTI LEFT ROOM LEFT GND L FRONT MULTI RIGHT ROOM RIGHT SURR. BACK CENTER GND 3 C AM LEFT 4 RS232C SW R 5 SL FRONT SR SURR. SBL SURR. BACK L DSS IN CD TV CB IN CR SURR.
You can control other Marantz products through this unit with the remote controller by connecting REMOTE CONTROL terminals on each unit. The signal transmitted from the remote controller is received by the remote sensor on this unit then the signal is sent to the connected device through this terminal. Therefore you need to aim the remote signal only to the unit.
1. 2. SETUP ENGLISH Select the AMP mode in remote commander. Press M(menu) button on the remote commander to display the “MAIN SETUP MENU” of the OSD menu system. There are 8 items in the MAIN SETUP MENU. Select a desired sub-menu with Up or Down cursor button, and press the OK button to entry. The display will change to selected sub-menu. You can lock the condition of setup to each sub-menu with Left or Right cursor buttons. Notes: If you desire to adjust any sub-menu, you need to set UNLOCKED.
Nine digital inputs can be assigned as the desired source. Use this menu to select the digital input jack to be assigned to the input source. 1. Select “INPUT SETUP” in MAIN SETUP MENU with Up or Down cursor button, and press the OK button. 1 CD T APE CD - R I NPUT SE TUP : D6 - AT : ANA : D1 - AT TV DS S DVD V CR 1 V CR 2 LD AU X 1 MA I N 2. 3. 4. : D4 - AT : D3 - AT : D5 - AT : ANA : ANA : D2 - AT : D - AT EX I T To select the input source, press Up or Down cursor button.
ENGLISH THX AUDIO SETUP SPEAKER DISTANCE (TIME ALIGNMENT) OSD menu system has an additional setup screen “THX AUDIO SETUP” on the 2nd page of SPEAKER SETUP. You can select setting of Boundary Gain Compensation and Advanced Speaker Array. Use this parameter to specify the distance of each speaker’s position from the listening position. The delay time is automatically calculated according to these distances. Begin by determining the ideal or most commonly used seating position in the room.
BASS PEAK LEVEL Here you will set the volume for each speaker so that they are all heard by the listener at the same level. With Dolby Digital and DTS , not only the LFE (Low Frequency Effects), but also the bass of all channels can be heard from the Subwoofer or Large-speakers. This procedure prevents these speakers from becoming too loud and creating an unbalanced sound. Since the sound is output at a loud volume, perform this operation carefully.
PREFERENCE SURROUND ENGLISH 3 P R E F E R E NC E T V - AU T O OSD I N FO D I G I T A L OU T S UBWOOF E R OU T MA I N 1. 2. 4 S URROUND : : : : S URR . MOD E : AU T O C I N EMA R E - EQ L FE LEVEL S URR L / R E F F E C T S URR B ACK E F F E C T C EN T ER E F F EC T S UB W E F F E C T D I S AB L E E NAB L E SOURC E THX EX I T Select “PREFERENCE” in MAIN SETUP MENU with Up or Down cursor button, and press the OK button. To select a desired content, press Up or Down cursor button.
Pro Logic II-Music mode creates a rich and enveloping surround ambience from stereo sources such as CDs. In this mode, SR9300 includes three controls to fine-tune the soundfield as follow.
7.1 CH INPUT LEVEL ENGLISH This sub-menu is to adjust the speaker levels for 7.1-channel input sources. Here you will adjust the volume for each channel so that they are all heard by the listener at the same level. 8 7 . 1 CH I NPUT F RON T L C E N T ER F RON T R S URR . R S URR . B R S URR . B L S URR . L S UB W MA I N 1. 2. 3. 4. LEVEL : : : : : : : : 0 0 0 0 0 0 0 0 dB dB dB dB dB dB dB dB EX I T Select “7.1CH IN” in MAIN SETUP MENU with Up or Down cursor button, and press the OK button.
ADJUSTING THE MAIN VOLUME SELECTING AN INPUT SOURCE. Before you can listen to any input media, you must first select the input source at the SR9300. E.G. : DVD ENGLISH BASIC OPERATION (PLAY BACK) VOLUME DOWN PLAY CLEAR MEMO DOWN GYRO TUNING F/P UP AUTO-TUNE UP T-MODE OK VOL DSS DVD TV VCR 1 VCR2/DVD-R CD TAPE CD-R MUTE TUNER CH ATT S H MULTI-SPK SLEEP S-DIRECT AUX1 MULTI ROOM A/D 7.
TEMPORARILY TURNING OFF THE SOUND ENGLISH VOLUME DOWN PLAY CLEAR MEMO DOWN GYRO TUNING F/P UP AUTO-TUNE UP T-MODE OK VOL DVD DSS TV VCR 1 VCR2/DVD-R CD TAPE CD-R MUTE TUNER CH ATT S H MULTI-SPK SLEEP S-DIRECT AUX1 MULTI ROOM A/D 7.1CH-IN AUX2 Ex AUX1 INPUT DIGITAL S-VIDEO VIDEO L AUDIO R M To temporarily silence all speaker outputs such as when interrupted by a phone call, press the MUTE button on the front panel or H button on the remote.
The SR9300 is equipped with many surround modes. these are provided to reproduce a variety of surround sound effects, according to the content of the source to be played. The available surround modes may be restricted depending on the input signal and speaker setup. AUTO When this mode is selected, the receiver determines whether the digital input signal is Dolby Digital, Dolbuy Digital Surround EX, DTS, DTS-ES, HDCD or PCM-audio.
ENGLISH 2 PRO LOGIC II MOVIE, PRO LOGIC II MUSIC, PRO LOGIC CAUTION This mode is used with source materials encoded in Dolby Digital and Dolby Surround. Dolby Pro Logic II brings the excitement of surround sound to any stereo mix, while making existing Dolby Surround mixes sound more like discrete 5.1 channels Surround sound. Dolby Pro Logic II has below 3 modes. Pro Logic II MOVIE provides 5.1 channel surround sound from Dolby Surround encoded stereo movie sound tracks.
Surround Mode Input Signal AUTO Dolby D Surr. EX DTS-ES Dolby D (5.1ch) DTS(5.1ch) Dolby D(2ch) Dolby D(2ch Surr) PCM(Audio) PCM 96kHz HDCD Analog S-DIRECT Dolby D Surr. EX DTS-ES Dolby D (5.1ch) DTS(5.1ch) Dolby D(2ch) Dolby D(2ch Surr) PCM(Audio) PCM 96kHz HDCD Analog DTS Dolby D Surr. EX cinema/music DTS-ES Dolby D (5.1ch) DTS(5.1ch) Dolby D(2ch) Dolby D(2ch Surr) PCM(Audio) PCM 96kHz HDCD Analog DTS ES Dolby D Surr. EX DTS-ES Dolby D (5.1ch) DTS(5.
Surround Mode Input Signal ENGLISH DOLBY (PL2-movie) (PL2-music) (PL2-PL) CSII music CSII cinema CSII mono STEREO Virtual Multi Ch. Stereo MOVIE HALL MATRIX Dolby D Surr. EX DTS-ES Dolby D (5.1ch) DTS(5.1ch) Dolby D(2ch) Dolby D(2ch Surr) PCM(Audio) PCM 96kHz HDCD Analog Dolby D Surr. EX DTS-ES Dolby D (5.1ch) DTS(5.1ch) Dolby D(2ch) Dolby D(2ch Surr) PCM(Audio) PCM 96kHz HDCD Analog Dolby D Surr. EX DTS-ES Dolby D (5.1ch) DTS(5.
OTHER FUNCTION TV AUTO ON/OFF FUNCTION This function allows the component connected to the TV-VIDEO in jack to control the power (ON/OFF) to the SR9300. AUTO POWER ON 1. ENGLISH VIDEO ON/OFF When no video signals of a DVD, etc., are connected to the SR9300 or the DVD, etc., are connected directly to a TV, the unnecessary video circuit can be turned off by selecting the “VIDEO OFF” setting. To select video off condition, tap Video off on the remote.
ENGLISH RECORDING AN ANALOG SOURCE RECORDING A DIGITAL SOURCE In normal operation, the audio or video source selected for listening through the SR9300 is sent to the record outputs. This means that any program you are watching or listening to may be recorded simply by placing machines connected to the outputs for TAPE OUT , CD-R/MD OUT, VCR1 OUT, and VCR2/DVD-R OUT in the record mode.
ENGLISH 7.1 CH INPUT. The SR9300 is equipped for future expansion through the use of Multi channel SACD or DVD-Audio player. This is selected, the input signals connected to the FL(front left), FR(front right), CENTER, SL (surround left), SR (surround right), SBL (surround back left) and SBR (surround back right) channels of the 7.1 CH.
BASIC OPERATION (TUNER) DIRECT FREQUENCY CALL ENGLISH LISTENING TO THE TUNER Frequency scan step for AM is selectable. Default setup is 10 kHz step, if your country’s standard is 9 kHz step, touch “AM” button on the remote more than 6 seconds. Scan step will change. 2. 3. 1. Note: • Preset memory for the tuner will clear by changing this setup. 1. AUTO TUNING 3. 2. 2. 3. 1. 4.
Each time the tuner finds a station, scanning will pause and the station will be played for five seconds. During this time, the following operations are possible. 1) The band can be changed by TUNER button . 2) The tuning mode can be changed by T-MODE button. If no button is pressed during this period, the current station is memorized in location Preset 02 If you wish to skip the current station, rotate the GYRO TUNING dial during this period, this station is skipped and auto presetting continues.
SORTING PRESET STATIONS ENGLISH VOLUME SELECTOR DOWN DISPLAY SELECT ENTER CLEAR LD STANDBY MEMO DOWN DSS DVD GYRO TUNING TV VCR 1 MULTI-SPK SLEEP S-DIRECT AUX1 MULTI ROOM A/D 7.1CH-IN AUX2 CD PHONES AUTO-TUNE TAPE UP T-MODE CD-R TUNER MUTE ATT AUX1 INPUT DIGITAL POWER ON/STANDBY F/P UP VCR2/DVD-R S-VIDEO VIDEO L AUDIO R Stored preset stations number can be kept line. To sort the numbers, press and hold the MEMO and the F/P buttons.
3. The Multi Room system is a function which allows you to listen to the same or a different source in a room other than the room in which the SR9300 is located. To use this function, a multi room remote unit and remote control signal receiver available from your Marantz dealer are necessary. The operations possible with the multi room function are explained briefly below. For details, refer to the instruction manual supplied with the multi room remote control unit and receiver. 4.
TROUBLESHOOTING ENGLISH In case of trouble, check the following before calling for service: 1. Are the connections made properly ? 2. Are you operating the unit properly following user’s guide ? 3. Are the power amplifiers and speaker working properly ? CAUSE SYMPTOM SR9300 cannot be turned up. If the unit does not operate properly, check items shown in the following table.
HOW TO RESET THE UNIT VOLUME SELECTOR DOWN DISPLAY SELECT ENTER STANDBY LD CLEAR MEMO DOWN DSS DVD TV GYRO TUNING VCR 1 MULTI-SPK SLEEP S-DIRECT AUX1 MULTI ROOM A/D 7.
TECHNICAL SPECIFICATIONS ENGLISH FM TUNER SECTION Frequency Range .................................... 87.5 - 108.0 MHz Usable Sensitivity ................................ IHF 1.8 µV/16.4 dBf Signal to Noise Ratio ....................... Mono/Stereo 76/72 dB Distortion ........................................ Mono/Stereo 0.2/0.3 % Stereo Separation ........................................... 1 kHz 45 dB Alternate Channel Selectivity ................... ± 300 kHz 60 dB Image Rejection ......................
COUNTRY ALGERIE ARMENIA AUSTRALIA AUSTRIA BAHREIN BANGLADESH BELGIUM BULGARIA CANADA CHINA CYPRUS CZECH REPUBLIC DENMARK DUBAI EGYPT ESTONIA F.Y.R.O.M. FINLAND FRANCE GERMANY GREECE HEADQUARTERS EUROPE: HONG KONG HUNGARY ICELAND INDIA IRAN IRELAND ISRAEL ITALY IVORY COAST JAPAN KOREA KUWAIT LATVIA LEBANON LITHUANIA MALAYSIA MALTA MAURITIUS MILITARY MARKET EUROPE NEW ZEALAND NORWAY OMAN POLAND PORTUGAL PROFESSIONAL EUROPE PROFESSIONAL U.S.A.
