R Model SR8200 User Guide AV Surround Receiver
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
IMPORTANT SAFETY INSTRUCTIONS READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of. 1. Read Instructions – All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions – The safety and operating instructions should be retained for future reference. 3.
20. Servicing – Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 21. Damage Requiring Service – Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power-supply cord or plug is damaged. b. If liquid has been spilled, or objects have fallen into the product. c.
FEATURES .................................................... 2 BASIC OPERATION (PLAY BACK) ............ 33 AMPLIFIER FEATURES ............................................................................... 2 AUDIO/VIDEO FEATURES ........................................................................... 2 FLEXBILITY FEATURES .............................................................................. 2 OTHER FEATURES ......................................................................................
ENGLISH FEATURES FLEXBILITY FEATURES AMPLIFIER FEATURES FUTURE-PROOF INTERFACE ARCHITECTURE a versatile RS232 port allows the SR8200’s internal Flash Memory to be directly computer accessed for installing such future upgrades as new DSP algorithms, new surround formats/parameters, and other types of processing updates. • THX Select certified 6ch amplifiers have enough power for even the most difficult conditions found in large rooms.
THX® is an exclusive set of standards and technologies established by the world-renowned film production company, Lucasfilm Ltd. THX resulted from George Lucas’ desire to reproduce the movie soundtrack as faithfully as possible both in the movie theater and in the home theater. THX engineers developed patented technologies to accurately translate the sound from a movie theater environment into the home, correcting the tonal and spatial errors that occur.
ENGLISH Circle Surround is backward compatible, such that surround playback is possible from any stereo or passive matrix-encoded material. Five full-bandwidth, discrete channels of information can be extracted from an enormous library of material not multi-channel encoded. These sources include many of today’s DVDs and laser discs, as well as most all video tape, VCD, Compact Disc, radio and television broadcast material. symbol are trademarks of SRS Labs, Inc.
@6 qw ENGLISH FRONT PANEL @7 e rtyu i o !0 !1 !2 AV SURROUND RECEIVER SR8200 VOLUME SELECTOR DOWN DISPLAY SELECT ENTER STANDBY 7.
ENGLISH !4 MUTE button @5 PHONES jack for stereo headphones Press this button to mute the output to the speakers. Press it again to return to the previous volume level. This jack may be used to listen to the SR8200’s output through a pair of headphones. Be certain that the headphones have a standard 1 / 4" stereo phone plug. Note that the main room speakers will automatically be turned off when the headphone jack is in use.
as d DISP ST PRO LOGIC CINEMA MOVIE fgh ANALOG MUSIC MUSIC PRO LOGIC ATT DIGITAL AUTO TUNED AUTO SURR COPY DIRECT TEST THX SURR EX NIGHT DISC 6.1 MTX 6.1 SLEEP PEAK j ENGLISH FL DISPLAY k OTHER PCM L C R LFE DIGITAL SURROUND 96kHz SL OTHER PCM L S SR C R MULTI SLEEP M-SPKR ¡0 l ¡1 ¡2 ¡3 DISP ST PRO LOGIC CINEMA MOVIE ¡4 ¡5 ANALOG MUSIC MUSIC PRO LOGIC ATT DIGITAL AUTO TUNED DIRECT TEST AUTO SURR COPY THX SURR EX NIGHT DISC 6.1 MTX 6.
ENGLISH ¡2 AUTO.SURR (Auto Surround mode) indicator. This indicator illuminates to show that the AUTO SURROUND mode is in use. ¡3 THX SURR EX (THX Surround EX mode) indicator. When THX surround EX mode is selected , this indicator lights. ¡4 DTS-ES mode indicators (DISC6.1, MTX6.1) These indicators will show to DTS-ES decoding mode. ¡5 PEAK indicator This indicator is a monitor for an analog audio input signal.
z x c v b n m , OPT 1 MODEL NO.SR8200 MONI. 2 PRE OUT L MONI. 1 MULTI VIDEO OUT + – FRONT MULTI LEFT ROOM LEFT GND Y ANTENNA 2 . + – DIGITAL-OUT ENGLISH REAR PANEL R CB COAX MONITOR OUT FRONT MULTI RIGHT ROOM RIGHT SURR. BACK CENTER GND 3 C AM DVD CR DSS Y TV CB IN CR LEFT RS232C SW R 4 SL FRONT SR SURR. SBL SURR. BACK L CD SURR. SPEAKER SYSTEMS 6-8 OHMS DSS IN LEFT EXT. IR OUT 5 DC OUT 1 DC OUT 2 IN IN SURR.
ENGLISH . Speaker outputs terminals (for Multi room) ⁄7 MULTI ROOM REMOTE IN/OUT terminals Two terminals are provided for the left and right speakers for Multiroom(2nd zone) IN: Connect to multi-room remote control device, available from your Marantz dealer. OUT: Connect to the Marantz component equipped with remote control (RC-5) terminals in another room (Second zone). Notes: • Connect the these jacks to the matching + or – terminals on your speakers.
J ˆ button This chapter describes the functions which control the SR8200. Please look at the user guide of the RC3200A for operation instructions. K Serial port Press this button turns on the backlight to LCD display. To connect the RC3200A with your computer by attached serial cable for future upgrades. 12 L LCD touch scren 11 ˆ ENGLISH REMOTE CONTROL UNIT RC3200A The LCD touch screen is divided into different sections: Here the date and time are displayed when you are operating your devices.
ENGLISH ACTIVATING THE RC3200A OPERATING DEVICES When the RC3200A is switched on for the first time or when it is reset, the Introduction screen appears for a few seconds. The RC3200A then automatically switches to the HOME screen that displays all available devices on your RC3200A. You can return to this HOME screen from within other screens by pressing the HOME button. See “Activating the HOME screen” for more details. To operate devices on your RC3200A you have to switch to the HOME screen.
INPUT SELECT 2 AMP PAGE 3/8 ENGLISH OPERATING AMP & TUNER To control the SR8200 by your RC3200A, you have to select the device AMP or TUNER on HOME screen. MAIN AMP PAGE 1/8 Tape, LD, AUX1, AUX2, VCR2, CD-R These buttons are used for selecting an input source.(see page 33) A/D button This button is used to select the Auto digital input, fixed digital input or analog input.
ENGLISH SURROUND MODE 1 MULTI ROOM AMP PAGE 5/8 AMP PAGE 8/8 AUTO, S-DIRECT, Mono, Stereo, M-Stereo(Multi channel stereo), Virtual, hall, matrix, Movie. These buttons are used to select surround mode.(see page 35, 36) On/Off These buttons are used to switch the unit to multi room mode. SURROUND MODE 2 Mute This button is used to mute the sound to multi room system temporarily. AMP PAGE 6/8 Volume + and – These buttons are used to adjust the sound level to multiroom system.
SHOW THE STATUS OF SR8200 ON THE LCD OF RC3200A RC3200 has 2way communication with SR8200, it shows some status screen for SR8200. 1/2 Status To show 1st page of status screen, press S button . ENGLISH TUNER PAGE 2/3 Frequency Direct button This button is used to select the mode of frequency direct input. Stereo/Mono button This button is used to select the FM tuning mode, auto stereo or mono. RDS Display button Selects display mode function in RDS (Radio Data System) by this button.
ENGLISH WORKING WITH MODES ADJUSTING THE SETTINGS RC3200A starts up in Use mode. In this mode you operate your devices. For customizing the RC3200A (adjusting the settings, learning buttons or recording macros) you have to switch to the appropriate mode. The RC3200A settings can be adjusted in the Setup mode. Note • When switching between modes you will always return to the last active screen. The RC3200A can be put into 4 different modes. These modes are: Use mode: For operating your devices.
1. Tap the Revert button. A message screen appears to confirm or cancel the revert process. 2. Press OK or Cancel. On the second setup page you can adjust: • the date; • the time. Adjust the Date You can set the year, the month and the day in the date settings. Press “+” to increase or “–” to decrease the value for the year, month and day. 1. Tap “+” or “–” once to adjust the year, month and day one value up or down. 2.
7. If an IR code or a brand is not in the database, you can program RC3200A commands by transmitting IR signals from your existing remote controls to RC3200A's learning eye. To do this, place RC3200A and the device's remote control on a flat surface, 1 to 4 inches (2 to 10 cm) apart. OK NO GOOD Top View DVD remote control unit Press and hold the button on the existing remote control you want to learn to the RC3200A.
Tap Macro button. Macro screen appears. 4. Press and hold the Mode button for 3 seconds. The Mode screen appears. Tap Macro on the Mode screen. A message screen appears. RC3200A is now in Macro Mode. 5. 6. Tap Next. The device screen with the Macro label appears. 8. Tap Start. The HOME screen appears with the 'Recording' label at the top of the screen. The buttons you tap on this screen will not be recorded.
13. Press Stop to stop recording. A message screen appears. ENGLISH RC3200 EDIT If you want to personalize your RC3200A even more beyond its standard programming features, RC3200edit is the tool for you to use. You can find more information and updates of the software on http:// www.marantz.com. RC3200edit is the visual editor for creating and configuring RC3200A Configuration Files (NCF) on your computer. An NCF is a file that is used to define the RC3200A behaviour and look for the LCD touch screen.
Take care not to scratch the touch screen Use your finger to tap the LCD touch screen or use plastic-tipped pens intended for use with touch screens. Never use an actual pen, pencil or other sharp object on the LCD touch screen. Protect RC3200A from extreme temperatures Keep RC3200A away from heaters and other heat sources. RC3200A is not waterproof RC3200A should not be exposed to rain or moisture. Do not store or use RC3200A in any location that is extremely damp or wet.
ENGLISH CONNECTING CONNECTING THE AUDIO COMPONENTS OUT L R OUT IN L L R R OUT L R SACD PLAYER CD PLAYER L R L R R L R L R L TAPE DECK L R L R R L MD PLAYER DIGITAL-OUT OPT 1 GND L FRONT MONITOR OUT CB RIGHT MULTI ROOM RIGHT SURR. BACK LEFT CENTER GND C RS232C AM SW R 4 EXT. IR OUT DC OUT 1 MULTI ROOM LEFT Y R 3 DIGITAL INPUT + Ð FRONT LEFT MONI. 1 MULTI VIDEO OUT ANTENNA 2 COAX + Ð MODEL NO.SR8200 MONI. 2 PRE OUT SL FRONT SR SURR. SBL SURR.
ENGLISH CONNECTING THE VIDEO COMPONENTS WITH S-VIDEO / COMPONENT S-VIDEO COMPONENT VIDEO OUT OUT Y CB CR SATELLITE TUNER Y CB CR CR CB Y + – DIGITAL-OUT OPT MODEL NO.SR8200 MONI. 2 PRE OUT 1 MONI. 1 MULTI VIDEO OUT MULTI LEFT ROOM LEFT Y ANTENNA 2 + – FRONT GND L R MONITOR OUT CB COAX FRONT MULTI RIGHT ROOM RIGHT SURR. BACK CENTER GND 3 C AM DVD CR DSS Y TV CB IN CR LEFT RS232C SW R 4 SL FRONT SR SURR. SBL SURR. BACK L CD SURR.
ENGLISH CONNECTING THE DIGITAL / 7.1CH INPUT DIGITAL OUTPUT SATELLITE TUNER + – DIGITAL-OUT OPT MODEL NO.SR8200 MONI. 2 PRE OUT 1 MONI. 1 MULTI VIDEO OUT MULTI LEFT ROOM LEFT Y ANTENNA 2 + – FRONT GND L R CB COAX MONITOR OUT FRONT MULTI RIGHT ROOM RIGHT SURR. BACK CENTER GND 3 C AM DVD CR DSS Y LEFT RS232C SW R 4 L CD FRONT SL TV CB IN CR DSS IN SURR. SPEAKER SYSTEMS 6-8 OHMS LEFT EXT. IR OUT 5 DC OUT 1 DC OUT 2 SR SURR. SBL SURR.
PASSIVE SUBWOOFER FRONT LEFT SPEAKER CENTER SPEAKER INVERT OUTPUT INPUT INPUT LEVEL BTL EXT. CONT. IN REMOTE CONT. INVERT OUTPUT INPUT INPUT LEVEL MASTER SLAVE MIN MAX BTL EXT. CONT. IN FRONT RIGHT SPEAKER REMOTE CONT. INVERT OUTPUT INPUT INPUT LEVEL BTL MASTER SLAVE VIDEO/ +5~13V DC SYSTEM OUT MIN IN OUT MAX EXT. CONT. IN SYSTEM OUT MIN IN OUT INVERT OUTPUT INPUT VIDEO/ +5~13V DC SYSTEM OUT OUT MIN IN BTL EXT. CONT. IN MAX VIDEO/ +5~13V DC REMOTE CONT.
ENGLISH CONNECTING THE REMOTE CONTROL BUS (RC-5) DIGITAL-OUT OPT GND L RS232C Y FRONT R CB C AM SW R 4 EXT. IR OUT 5 DC OUT 2 MONITOR OUT SL FRONT SR SURR. SBL SURR. BACK OUT MULTI RC SBR RC-5 MULTI OUT CD IN RIGHT MULTI ROOM RIGHT DIGITAL-IN IN CENTER L Y TV CB IN CR 7.1CH-IN R OUT Y IN CB VCR2/ DVD-R CD-R /MD OUT R CR DSS SURR. BACK LEFT CENTER SURR. LEFT SPEAKER SYSTEMS 6-8 OHMS DSS IN SURR. RIGHT VCR1 OUT S.
Select the AMP mode in remote commander. Press M(menu) button on the remote commander to display the “MAIN SETUP MENU” of the OSD menu system. There are 8 items in the MAIN SETUP MENU. Select a desired sub-menu with Up or Down cursor button, and press the OK button to entry. The display will change to selected sub-menu. You can lock the condition of setup to each sub-menu with Left or Right cursor buttons. Notes: If you desire to adjust any sub-menu, you need to set UNLOCKED.
ENGLISH INPUT SETUP (ASSIGNABLE DIGITAL INPUT) Six digital inputs can be assigned as the desired source. Use this menu to select the digital input jack to be assigned to the input source. 1. Select “INPUT SETUP” in MAIN SETUP MENU with Up or Down cursor button, and press the OK button. 1 CD T APE CD - R I NPUT SE TUP : D6 - AT : AN A : D1 - AT TV DSS DVD V CR 1 V CR 2 AU X 1 MA I N 2. 3. 4.
SPEAKERS LEVEL Use this parameter to specify the distance of each speaker’s position from the listening position. The delay time is automatically calculated according to these distances. Begin by determining the ideal or most commonly used seating position in the room. This is important for the timing of the acoustics to create the proper sound space that the SR8200 and today’s sound systems are able to produce.
BASS PEAK LEVEL ENGLISH With Dolby Digital and DTS , not only the LFE (Low Frequency Effects), but also the bass of all channels can be heard from the Subwoofer or Large-speakers. This procedure prevents these speakers from becoming too loud and creating an unbalanced sound. Since the sound is output at a loud volume, perform this operation carefully.
PL2 (PRO LOGIC II) MUSIC PARAMETER 4 S UR ROUND S URR . MOD E : A U T O C I N EMA R E - EQ L FE LEVEL S URR L / R E F F E C T S URR B AC K E F F E C T C ENT ER E F F EC T S UB W E F F E C T MA I N 1. 2. : : : : : : OF F 0 dB ∗ ∗ ∗ dB ∗ ∗ ∗ dB ∗ ∗ ∗ dB ∗ ∗ ∗ dB EX I T Select “SURROUND” in MAIN SETUP MENU with Up or Down cursor button, and press the OK button. To select a desired content , press Up or Down cursor button. SURR-MODE : Select the desired surround mode with Left or Right cursor button.
ENGLISH MULTI ROOM DC TRIGGER SETUP SR8200 has some feature to MULTI ROOM SYSTEM as source selector, OSD information, sleep timer, Multi Room Speaker output and remote control. You can set such feature by this sub-menu. SR8200 has two DC trigger control jacks, each one is selectable to link with input functions for the main room or multi room. 1.
ADJUSTING THE MAIN VOLUME SELECTING AN INPUT SOURCE. Before you can listen to any input media, you must first select the input source at the SR8200. E.G.
ENGLISH TEMPORARILY TURNING OFF THE SOUND VOLUME DOWN PLAY CLEAR DOWN MEMO TUNING UP F/P T-MODE UP P-SCAN OK VOL N DVD DSS TV VCR 1 VCR2/DVD-R CD TAPE CD-R MUTE TUNER CH ATT S H MULTI-SPK SLEEP S-DIRECT AUX1 MULTI ROOM A/D NIGHT AUX2 Ex AUX1 INPUT DIGITAL S-VIDEO VIDEO L AUDIO R M To temporarily silence all speaker outputs such as when interrupted by a phone call, press the MUTE button on the front panel or H button on the remote.
The SR8200 is equipped with many surround modes. these are provided to reproduce a variety of surround sound effects, according to the content of the source to be played. The available surround modes may be restricted depending on the input signal and speaker setup. AUTO When this mode is selected, the receiver determines whether the digital input signal is Dolby Digital, Dolbuy Digital Surround EX, DTS, DTS-ES or PCM-audio.
CIRCLE SURROUND ENGLISH CS-Cinema, CS-Music Circle Surround is designed to enable multi-channel surround sound playback of non-encoded and multi-channel encoded material. Backward compatibility provides listeners with 5.1 channels of surround performance from entire collection of music and film, including broadcast, videotape and stereo recorded music. Regarding to source material, you can select CS-Cinema mode or CS-Music mode. MULTI CH.
Surround Mode Input Signal AUTO Dolby D Surr. EX DTS-ES Dolby D (5.1ch) DTS(5.1ch) Dolby D(2ch) Dolby D(2ch Surr) PCM(Audio) PCM 96kHz Analog S-DIRECT Dolby D Surr. EX DTS-ES Dolby D (5.1ch) DTS(5.1ch) Dolby D(2ch) Dolby D(2ch Surr) PCM(Audio) PCM 96kHz Analog DTS Dolby D Surr. EX cinema/music DTS-ES Dolby D (5.1ch) DTS(5.1ch) Dolby D(2ch) Dolby D(2ch Surr) PCM(Audio) PCM 96kHz Analog DTS ES Dolby D Surr. EX DTS-ES Dolby D (5.1ch) DTS(5.
ENGLISH Surround Mode Input Signal CS5.1 music Dolby D Surr. EX CS5.1 cinema DTS-ES Dolby D (5.1ch) DTS(5.1ch) Dolby D(2ch) Dolby D(2ch Surr) PCM(Audio) PCM 96kHz Analog STEREO Dolby D Surr. EX DTS-ES Dolby D (5.1ch) DTS(5.1ch) Dolby D(2ch) Dolby D(2ch Surr) PCM(Audio) PCM 96kHz Analog Virtual Dolby D Surr. EX DTS-ES Dolby D (5.1ch) DTS(5.1ch) Dolby D(2ch) Dolby D(2ch Surr) PCM(Audio) PCM 96kHz Analog Multi Ch. Dolby D Surr. EX Stereo DTS-ES Dolby D (5.1ch) DTS(5.
VIDEO ON/OFF TV AUTO ON/OFF FUNCTION This function allows the component connected to the TV-VIDEO in jack to control the power (ON/OFF) to the SR8200. AUTO POWER ON 1. When no video signals of a DVD, etc., are connected to the SR8200 or the DVD, etc., are connected directly to a TV, the unnecessary video circuit can be turned off by selecting the “VIDEO OFF” setting. To select video off condition, tap Video off on the remote.
ENGLISH RECORDING AN ANALOG SOURCE RECORDING A DIGITAL SOURCE In normal operation, the audio or video source selected for listening through the SR8200 is sent to the record outputs. This means that any program you are watching or listening to may be recorded simply by placing machines connected to the outputs for TAPE OUT , CD-R/MD OUT, VCR1 OUT, and VCR2/DVD-R OUT in the record mode.
ENGLISH 7.1 CH INPUT. The SR8200 is equipped for future expansion through the use of Multi channel SACD or DVD-Audio player. This is selected, the input signals connected to the FL(front left), FR(front right), CENTER, SL (surround left), SR (surround right), SBL (surround back left) and SBR (surround back right) channels of the 7.1 CH.
ENGLISH BASIC OPERATION (TUNER) DIRECT FREQUENCY CALL LISTENING TO THE TUNER Frequency scan step for AM is selectable. Default setup is 10 kHz step, if your country’s standard is 9 kHz step, touch “AM” button on the remote more than 6 seconds. Scan step will change. 2. 3. 1. Note: • Preset memory for the tuner will clear by changing this setup. 1. AUTO TUNING 3. 2. 3. 1. 4. VOLUME DOWN DISPLAY 7.
Each time the tuner finds a station, scanning will pause and the station will be played for five seconds. During this time, the following operations are possible. 1) The band can be changed by TUNER button . 2) The tuning mode can be changed by T-MODE button. If no button is pressed during this period, the current station is memorized in location Preset 02 If you wish to skip the current station, press the TUNING UP or DOWN button during this period, this station is skipped and auto presetting continues.
SORTING PRESET STATIONS ENGLISH VOLUME SELECTOR DOWN DISPLAY SELECT ENTER 7.1CH-IN STANDBY CLEAR DOWN MEMO DSS DVD TV TUNING VCR 1 MULTI-SPK SLEEP S-DIRECT AUX1 MULTI ROOM A/D NIGHT AUX2 UP VCR2/DVD-R F/P CD PHONES UP P-SCAN CD-R TUNER MUTE ATT AUX1 INPUT DIGITAL POWER ON/STANDBY T-MODE TAPE S-VIDEO VIDEO L AUDIO R Stored preset stations number can be kept line. To sort the numbers, press and hold the MEMO and the F/P buttons.
3. The Multi Room system is a function which allows you to listen to the same or a different source in a room other than the room in which the SR8200 is located. To use this function, a multi room remote unit and remote control signal receiver available from your Marantz dealer are necessary. The operations possible with the multi room function are explained briefly below. For details, refer to the instruction manual supplied with the multi room remote control unit and receiver. 4.
ENGLISH TROUBLESHOOTING In case of trouble, check the following before calling for service: 1. Are the connections made properly ? 2. Are you operating the unit properly following user’s guide ? 3. Are the power amplifiers and speaker working properly ? CAUSE SYMPTOM SR8200 cannot be turned up. If the unit does not operate properly, check items shown in the following table.
HOW TO RESET THE UNIT SELECTOR VOLUME DOWN DISPLAY SELECT ENTER STANDBY 7.
TECHNICAL SPECIFICATIONS FM TUNER SECTION Frequency Range ................................................................................................................................................. 87.5 - 108.0 MHz Usable Sensitivity ............................................................................................................................................. IHF 1.8 µV/16.4 dBf Signal to Noise Ratio ........................................................................................
COUNTRY ALGERIE ARMENIA AUSTRALIA AUSTRIA BAHREIN BANGLADESH BELGIUM BULGARIA CANADA CHINA CYPRUS CZECH REPUBLIC DENMARK DUBAI EGYPT ESTONIA F.Y.R.O.M. FINLAND FRANCE GERMANY GREECE HEADQUARTERS EUROPE: HONG KONG HUNGARY ICELAND INDIA IRAN IRELAND ISRAEL ITALY IVORY COAST JAPAN KOREA KUWAIT LATVIA LEBANON LITHUANIA MALAYSIA MALTA MAURITIUS MILITARY MARKET EUROPE NETHERLANDS NEW ZEALAND NORWAY OMAN POLAND PORTUGAL PROFESSIONAL EUROPE PROFESSIONAL U.S.A.
