R Model SR7300 / SR7300OSE User Guide AV Surround Receiver
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
IMPORTANT SAFETY INSTRUCTIONS READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of. 1. Read Instructions – All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions – The safety and operating instructions should be retained for future reference. 3.
20. Servicing – Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 21. Damage Requiring Service – Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power-supply cord or plug is damaged. b. If liquid has been spilled, or objects have fallen into the product. c.
INTRODUCTION ............................................ 2 SURROUND MODE ..................................... 29 PRECAUTIONS ............................................. 2 OTHER FUNCTION ..................................... 32 DESCRIPTION ............................................... 2 FEATURES .................................................... 4 ACCESSORIES ............................................. 4 FRONT PANEL .............................................. 5 FL DISPLAY ...................
ENGLISH INTRODUCTION DESCRIPTION Thank you for purchasing the Marantz SR7300 Surround receiver. This remarkable component has been engineered to provide you with many years of home theater enjoyment. Please take a few minutes to read this manual thoroughly before you connect and operate the SR7300. As there are a number of connection and configuration options, you are encouraged to discuss your own particular home theater setup with your Marantz A/V specialist dealer.
DTS 96/24 allows for 5.1channel sound tracks to be encoded at a rate of 96kHz/24bits on DVD-Video titles. When DVD-video appeared, it became possible to deliver 24-bit, 96 kHz audio into the home, but only in two channels, and with serious limitations on picture. This capability has had little use. DVD-audio allows 96/24 in six channels, but a new player is needed, and only analog outputs are provided, necessitating the use of the D/A converters and analog electronics provided in the player.
ENGLISH FEATURES ACCESSORIES The SR7300 incorporates the latest generation of digital surround sound decoding technology such as Dolby Digital EX, Dolby Digital, DTS ES (Discrete 6.1 and Matrix 6.1), DTS Neo:6 (Cinema, Music), Dolby Pro-Logic II (Movie and Music), Circle Surround II (Cinema and Music) . In addition, Marantz has focused on the future. By utilizing pre-out jacks, 7.
ENGLISH FRONT PANEL @1 !5 !6 !7 !8 !9 !0 u i o e r t y qw !1 !2 AV SURROUND RECEIVER SR7300 SELECTOR VOLUME CLEAR MEMORY SPEAKERS A/B SELECT TUNING 7.
ENGLISH !3 AUX1 input jacks These auxiliary video/audio and optical digital input jacks accept the connection of a camcorder, portable DVD, game etc. !4 INPUT FUNCTION SELECTOR buttons (AUDIO/ VIDEO) These buttons are used to select the input sources. The video function selector, such as TV, DVD, VCR1, DSS and AUX1, selects video and audio simultaneously. Audio function sources such as CD, TAPE, CDR/MD, TUNER, and AUX2 may be selected in conjunction with a Video source.
s ¡8 f a d DISP MULTI SLEEP h g AUTO AUTO SURR TUNED DIRECT j ST V – OFF DISC 6.1 k ¡0 ¡2 ¡4 l ¡1 ¡3 NIGHT MT X 6.1 PEAK SPKR AB ATT EQ ¡5 ANALOG SURROUND DIGITAL DIGITAL L C SL ¡7 This indicator lights when the SR7300 is in the display off condition. s SLEEP timer indicator This indicator lights when the seep timer function in main-room is in use. d Multi-room system indicator This indicator lights when the multi-room system is active.
ENGLISH REAR PANEL z x c v COMPONENT VIDEO ANTENNA DVD Y FM (75Ω) VIDEO TV GND CB / PB Y MONI MULTI OUT OUT VCR1 DSS / VCR2 OUT IN OUT RC-5 DIGITAL IN 2 3 CB / PB , AC IN MODEL NO. SR7300 MONI OUT DSS / VCR2 CR / PR m CR / PR Y CB / PB RS-232C SERIAL NO.
⁄5 REMOTE CONT. IN/OUT terminals Connect the AC power cables of components such as a DVD and CD player to these outlets. SWITCHED and UNSWITCHED outlets are provided. The one marked SWITCHED provides power only when the SR7300 is turned on and is useful for components which you use every time you play your system. The one marked UNSWITCHED is always live as long as the SR7300 is plugged into a live outlet.
ENGLISH REMOTE CONTROLLER RC7300SR NAMES AND FUNCTIONS b EQ button Used to turn on or off HT (Home Theater)-EQ mode. This mode compensates for the audio portion of a movie sounding “bright”. When this button is pressed, “HT-EQ” indicator lights up. n V-OFF (video off) button z Used to turn off the video signal. m DVD operating buttons x c v n S ⁄4 AUDIO button Used to select one of the audio language. b ‹3 m ⁄2 ‹1 ‹0 ¤9 ¤8 ¤7 ¤6 ¤5 ¤4 ¤3 ⁄3 ¤2 , ⁄1 (when DVD mode is selected) ‹4 .
¤4 P.SCAN (preset scan) button Used to operate on-screen and other displays used by receivers and other components. (when TUNER mode is selected) Used to start preset scan when SR7300 is selected TUNER mode. ⁄6 CH SEL. (channel select) button ¤5 MUTE button (when AMP mode is selected) Used to call up SETUP MAIN MENU and adjust speaker levels or 7.1 ch input level. Muting button of the SR7300. Press this button decrease the sound temporarily . Press this button again to return to the previous sound.
ENGLISH LCD (Liquid Crystal Display) REMOTE CONTROL RANGE Information about currently selected functions and modes is displayed on the LCD. a b c d e f The distance between the transmitter of the remote control unit and the IR SENSOR of the SR7300 should be less than about 5 meters. If the transmitter is pointed to a direction other than the IR SENSOR or if there is an obstacle between them, remote control may not be possible.
ENGLISH GENERAL INFORMATION OF RC7300SR TO SR7300 To control the SR7300 by your RC7300SR, you have to select the device AMP or TUNER by function selector button. Please refer as below for the details in AMP and TUNER mode. AMP MODE POWER ON/OFF Turns the SR7300 on and off POWER ON Turns the SR7300 on POWER OFF Turns the SR7300 off V-OFF Turns on or off Video OFF mode EQ Turns on or off HT-EQ mode 7.1/6.1 IN Selects the 7.
HEIGHT OF THE SPEAKER UNITS ENGLISH CONNECTIONS Front left and right speakers, and a center speaker Align the tweeters and mid-range drivers on the three front speakers on the same height as well as possible. SPEAKER PLACEMENT The ideal surround speaker system for this unit is 7-speaker systems, using front left and right speakers, a center speaker, surround left and right speakers, a surround back and a subwoofer.
PASSIVE SUBWOOFER POWER AMPLIFIER INVERT OUTPUT INPUT INPUT LEVEL BTL EXT. CONT. IN SURROUND LEFT RIGHT FRONT LEFT RIGHT or ENGLISH CONNECTING SPEAKERS REMOTE CONT. MASTER SLAVE MIN MAX VIDEO/ +5~13V DC SYSTEM OUT OUT IN F US E SPEAKER SYSTEM MINIMUM 4 OHMS POWERED SUBWOOFER COMPONENT VIDEO ANTENNA FM (75Ω) VIDEO TV GND C B / PB CR / PR Y MONI MULTI OUT OUT DSS / VCR2 VCR1 OUT IN OUT RC-5 DIGITAL IN 2 3 MONI OUT C R / PR Y CB / PB RS-232C CR / PR SERIAL NO.
ENGLISH CONNECTING AUDIO COMPONENTS OUT IN L L R R L R DIGITAL INPUT TAPE DECK CD PLAYER CD RECORDER / MD DECK DIGITAL OUT OUTPUT L L L R R R DIGITAL OUTPUT OUT IN L R L R R L L R L R FM (75Ω) TV GND C B / PB CR / PR Y MONI MULTI OUT OUT DSS / VCR2 VCR1 OUT IN OUT RC-5 DIGITAL IN 3 MONI OUT C R / PR Y CB / PB RS-232C C R / PR SERIAL NO. AM DVD IN 2 CB / PB AC IN MODEL NO.
CONNECTING VIDEO COMPONENTS VIDEO PROJECTOR DIGITAL AUDIO VIDEO COMPONENT S-VIDEO VIDEO OUT OUT OUT OUT OUT Y SATELLITE TUNER ENGLISH DVD PLAYER DIGITAL AUDIO VIDEO OUT OUT OUT COMPONENT S-VIDEO VIDEO IN IN CB / PB CR / PR Y S-VIDEO OUT CB / PB CR / PR L R L R L L R R L R COMPONENT VIDEO ANTENNA COMPONENT VIDEO ANTENNA DVD Y C B / PB C R / PR Y C R / PR CB / PB DVD MO MONI OUT DSS / VCR2 Y CB / P B Y RS-232C FM (75Ω) GND GND Y MONI MULTI OUT OUT VIDEO VCR1 IN DSS / V
ENGLISH ADVANCED CONNECTING R L R L R L R L DVD AUDIO PLAYER or SACD MULTI CHANNEL PLAYER COMPONENT VIDEO ANTENNA FM (75Ω) VIDEO GND TV C B / PB C R / PR Y MONI MULTI OUT OUT MONI OUT CR / PR C B / PB R L AC IN MODEL NO. SR7300 DSS / VCR2 DVD Y R L Y CB / P B RS-232C SERIAL NO. C R / PR CENTER AM DVD VCR1 IN DSS / VCR2 OUT IN OUT TV VCR1 DVD IN OUT IN OUT L SL SBL L S-VIDEO DSS/VCR2 MONI OUT R FRONT SURR.
FM EXTERNAL ANTENNA FM ANTENNA FM (75Ω) TV GND CB / PB C R / PR Y MONI MULTI OUT OUT DSS / VCR2 VCR1 OUT IN 5 6 OUT RC-5 DIGITAL IN 2 4 3 Y C B / PB RS-232C SERIAL NO. C R / PR AM DVD IN 1 MONI OUT CR / PR CB / P B AC IN MODEL NO.
ENGLISH CONNECTING FOR THE MULTI ROOM (Same source as the main room) LEFT RIGHT SPEAKER SPEAKER COMPONENT VIDEO CB / PB DSS / VCR2 OUT IN 5 6 OUT CR / PR Y MONI MULTI OUT OUT RC-5 DIGITAL OUT OPT MONI OUT C R / PR CB / PB TV DVD MULTI RC AC IN MODEL NO. SR7300 DSS / VCR2 DVD Y Y C B / PB VCR1 IN RS-232C SERIAL NO.
After all components are connected, initial setup must be performed. ON SCREEN DISPLAY MENU SYSTEM The SR7300 incorporates an on-screen menu system, which makes various operations possible by using the cursor ( , , , ) and OK buttons on the remote control unit or MULTI FUNCTION dial, TUNING / button and ENTER button on the front panel. Use MULTI FUNCTION dial as Up/Down button in remote, TUNING / button as Left/Right button in remote, ENTER button as OK button in remote. 3.
ENGLISH 1 INPUT SETUP (ASSIGNABLE DIGITAL INPUT) Six digital inputs can be assigned as the desired source. Use this menu to select the digital input jack to be assigned to the input source. 1. Select “INPUT SETUP” in SETUP MAIN MENU with button, and press the OK button. 1 CD T APE CD - R or cursor I NPU T S E TUP : D6 - AT : ANA : D1 - AT TV DVD V CR 1 DSS AU X 1 : D4 - AT : D5 - AT : ANA : D2 - AT : D - AT 1. 2. 3. 4.
SURR. BACK: Set the distance from a surround back speaker to your normal listening position between 1 and 30 feet in 1.0foot intervals (0.3 to 9 meters in 0.3-meter intervals). (SURR. B L) : Set the distance from the surround back left speaker to your normal listening position between 1 and 30 feet in 1.0-foot intervals (0.3 to 9 meters in 0.3-meter intervals). (SURR. B R) : Set the distance from the surround back right speaker to your normal listening position between 1 and 30 feet in 1.
Notes: ENGLISH • Speakers that you selected “None” for in the Speaker Size menu will not appear. • The setting of Surr.Back L and Surr.Back R appears if set for two surround back speakers in the Speaker Size menu. • The setting of Surr.Back appears if set for one surround back speaker in the Speaker Size menu. • To adjust the speaker levels for 7.1-channel input sources, you will need to use the 7.1CH-INPUT sub menu. (See page 26).
Pro Logic II-Music mode creates a rich and enveloping surround ambience from stereo sources such as CDs. In this mode, SR7300 includes three controls to fine-tune the soundfield as follow. 5 P L II MU S I C P ARAME T E R P ARAME T E R : D E F AU L T P ANOR AMA D I MEN S I ON CEN T E R W I D TH : : : OF F 4 0 MA I N TRUBASS: Set the TRUBASS level between 0 and 6 level in 1 level interval with or cursor button.
ENGLISH 8 7.1 CH INPUT LEVEL This sub-menu is to adjust the speaker levels for 7.1-channel input sources. Here you will adjust the volume for each channel so that they are all heard by the listener at the same level. 8 7 . 1 CH I NPUT F RON T L C E N T ER F RON T R S URR . R S URR . B R S URR . B L S URR . L S UB W MA I N 1. 2. 3. 4. LEVEL : : : : : : : : 0 0 0 0 0 0 0 0 dB dB dB dB dB dB dB dB EX I T Select “7.1CH IN” in MAIN SETUP MENU with or cursor button, and press the OK button.
ADJUSTING THE MAIN VOLUME ENGLISH BASIC OPERATION (PLAY BACK) SELECTING AN INPUT SOURCE. VOLUME Before you can listen to any input media, you must first select the input source at the SR7300. E.G. : DVD CLEAR MEMORY SPEAKRS A/B TUNING 7.1CH INPUT F/P A/D DOWN MODE S-DIRECT UP MULTIROOM MUTE TV DVD VCR1 DSS/VCR2 AUX1 AUX2 CD-R TAPE ATT TUNER CD AUX1 INPUT DIGITAL S-VIDEO VIDEO L AUDIO R AV SURROUND RECEIVER SR7300 SURROUND CLEAR MEMORY SPEAKRS A/B TUNING 7.
ENGLISH TEMPORARILY TURNING OFF THE SOUND VOLUME CLEAR MEMORY SPEAKRS A/B TUNING 7.1CH INPUT F/P A/D DOWN MODE S-DIRECT UP MULTIROOM MUTE TV DVD VCR1 DSS/VCR2 AUX1 AUX2 CD-R TAPE CD ATT TUNER AUX1 INPUT DIGITAL S-VIDEO VIDEO L AUDIO R To temporarily silence all speaker outputs such as when interrupted by a phone call, press the MUTE button on the front panel or MUTE button on the remote.
The SR7300 is equipped with many surround modes. These are provided to reproduce a variety of surround sound effects, according to the content of the source to be played. The available surround modes may be restricted depending on the input signal and speaker setup. AUTO When this mode is selected, the receiver determines whether the digital input signal is Dolby Digital, Dolby Digital Surround EX, DTS, DTS-ES, DTS 96/24 or PCM-audio.
ENGLISH CIRCLE SURROUND II (CSII-CINEMA, CSII-MUSIC, CSII-MONO) CAUTION Circle Surround is designed to enable multi-channel surround sound playback of non-encoded and multi-channel encoded material. Backward compatibility provides listeners with up to 6.1 channels of surround performance from entire collection of music and film, including broadcast, videotape and stereo recorded music. Regarding to source material, you can select CSII-Cinema mode, CSII-Music mode or CSII-Mono mode.
Surround Mode Input Signal Decoding AUTO Dolby Digital EX Dolby Digital 5.1 Dolby Digital 2.0 Pro Logic II movie DTS-ES DTS 96/24 DTS 5.1 PCM (Stereo) PCM (96kHz Stereo) Stereo Stereo Dolby Digital EX Dolby Digital 5.1 Dolby Digital 2.0 Pro Logic II movie DTS-ES DTS 96/24 DTS 5.1 PCM (Stereo) PCM (96kHz Stereo) Stereo Stereo Dolby Digital EX Dolby Digital EX DTS-ES DTS-ES Dolby Digital 5.1 Dolby Digital 5.1 Pro Logic II Pro Logic II Pro Logic II Pro Logic II DTS 5.1 DTS 96/24 DTS 5.
ENGLISH OTHER FUNCTION VIDEO ON/OFF TV AUTO ON/OFF FUNCTION This function allows the component connected to the TV-VIDEO in jack to control the power (ON/OFF) to the SR7300. AUTO POWER ON 1. Be sure TV auto mode is ENABLE. (Refer page 24 : System Setup) Connect your TV TUNER (etc) to the TV-VIDEO in terminal. Be sure to connect the VIDEO input. Turn OFF the power to the TV TUNER and the SR7300. Turn ON the TV TUNER and tune in a receivable station.
HT-EQ ENGLISH RECORDING AN ANALOG SOURCE In normal operation, the audio or video source selected for listening through the SR7300 is sent to the record outputs. This means that any program you are watching or listening to may be recorded simply by placing machines connected to the outputs for TAPE OUT , CD-R/MD OUT, VCR1 OUT, and DSS/VCR2 OUT in the record mode. AV SURROUND RECEIVER SR7300 SURROUND DISP MULTI SLEEP AUTO AUTO SURR TUNED DIRECT ST V – OFF DISC 6.1 NIGHT MTX 6.
ENGLISH 7.1 CH INPUT. The SR7300 is equipped for future expansion through the use of Multi channel SACD multi channel player or DVD-Audio player. This is selected, the input signals connected to the L(front left), R (front right), CENTER, SL (surround left), SR (surround right), SBL (surround back left) and SBR (surround back right) channels of the 7.1 CH.
DIRECT FREQUENCY CALL LISTENING TO THE TUNER 2. Frequency scan step for AM is selectable. Default setup is 10 kHz step, if your country’s standard is 9 kHz step, Press TUNER button on the remote more than 6 seconds. Scan step will change. 3. ENGLISH BASIC OPERATION (TUNER) 1. Note: • Preset memory for the tuner will clear by changing this setup. 1. AUTO TUNING 3. 2. 3. 2. 1. 2. VOLUME R MEMORY A/B TUNING 7.
3. ENGLISH Each time the tuner finds a station, scanning will pause and the station will be played for five seconds. During this time, the following operations are possible. 1) The band can be changed by TUNER button . 2) The tuning mode can be changed by MODE button. If no button is pressed during this period, the current station is memorized in location Preset 02 If you wish to skip the current station, press the TUNING button during this period, this station is skipped and auto presetting continues.
AV SURROUND RECEIVER SR7300 SURROUND VOLUME CLEAR MEMORY SPEAKRS A/B TUNING 7.1CH INPUT F/P A/D DOWN MODE S-DIRECT MUTE TV STANDBY UP MULTIROOM ENTER SELECT DVD VCR1 DSS/VCR2 AUX1 AUX2 CD-R TAPE ATT ENGLISH SORTING PRESET STATIONS TUNER CD AUX1 INPUT POWER ON/STANDBY DIGITAL PHONES S-VIDEO VIDEO L AUDIO R Stored preset stations number can be kept line. To sort the numbers, press and hold the MEMORY and the F/P buttons.
ENGLISH MULTI ROOM SYSTEM The Multi Room system is a function which allows you to listen to the same or a different source in a room other than the room in which the SR7300 is located. To use this function, a multi room remote unit and remote control signal receiver available from your Marantz dealer are necessary. The operations possible with the multi room function are explained briefly below. For details, refer to the instruction manual supplied with the multi room remote control unit and receiver.
ENGLISH REMOTE CONTROLLER OPERATION CONTROLLING MARANTZ COMPONENTS 1. Press the desired function button. • The selected function name and USE are displayed in LCD. 2. Press the desired operation buttons to play the selected component. • For details, refer to the components’s user guide. • It may not be possible to operate some models. CONTROLLING A MARANTZ DVD PLAYER (DVD MODE) POWER ON/OFF POWER ON POWER OFF / AUDIO ANGLE SUBTITLE 0 - 9,+10 DISP F.
ENGLISH CONTROLLING A MARANTZ MD DECK (MD MODE) POWER ON/OFF POWER ON POWER OFF / 0-9 CL MEMO MENU/OSD 4/¢ 5/6 0 ; 9 2 Turns the MD deck on and off Turns the MD deck on Turns the MD deck off Eject the MD disc Inputs the numeric Clears the inputting Programs Switches the display information Skips forward or previous track Searches forward or backward Record Pause Stop Play CONTROLLING A MARANTZ TAPE DECK (TAPE MODE) POWER ON/OFF POWER ON POWER OFF / 0-9 CL MEMO DECK A B 12 4/¢ 5/6 0 ; 9 2 40 Turns the ta
ERASING LEARNING CODE The remote controller is capable of learning and memorizing the remote control codes used by almost any other remote controller you may already own. • If no commands have been programmed for a particular function button, the remote controller will transmit whatever codes have been factory preset. • The following example shows how to program your remote controller and how to use the codes for a DVD player. Erasing the code by buttons 1. Press and hold down the T.
ENGLISH Erasing the all functions 1. Press and hold down the T.MODE and MEMO buttons until LEARN is displayed in the display. 2. Press and hold down the CL button and press POWER ON and POWER OFF button. • A-CLR and LEARN are blinking. 3. Press OK button to continue erasing. • A-CLR is displayed for 3 seconds and the mode returns to LEARN mode. • To cancel the erasing operation, do not press OK button and simply touch any other button. 4.
When you are finished programming macros, press and hold the OK button until the display returns to USE mode. • Macros cannot be programmed for the MEMO, cursor/OK, VOL / or CL buttons. In the macro mode it is possible to program the memory to perform macros containing up to 10 steps. • Each of the function operations (12 including CD, CD-R, etc.) can be used in a macro more than once, however for all except AMP, only the first function operation will be transmitted as a signal from the remote controller.
EXAMPLES OF MACRO PROGRAMS ENGLISH Example 1 Change the input source for the amplifier to CD and play the 3rd track on a CD in the CD player. 1. Press and hold the T.MODE and MENU button until the MACRO is displayed on the LCD. • LEARN and MACRO is displayed blinking. 2. Press the CD Function button. CD-M is displayed on the LCD. 3. Press CD, 3 , and 3 buttons.
The following procedure is used to erase macros you have programmed into the remote controller’s memory. 1. Press and hold the T.MODE and MENU button until the MACRO is displayed on the LCD. • LEARN and MACRO is displayed blinking. 2. 3. ADJUSTING THE INTERVAL TIME OF MACRO OPERATIONS TRANSMITTING 1. Press and hold the T.MODE and SETUP button until the SETUP is displayed on the LCD. • SETUP is displayed for 3 seconds 2. Confirm the display changes from SETUP to MCRxx.
ENGLISH TROUBLESHOOTING In case of trouble, check the following before calling for service: 1. Are the connections made properly ? 2. Are you operating the unit properly following user’s guide ? 3. Are the power amplifiers and speaker working properly ? SYMPTOM SR7300 cannot be turned up. If the unit does not operate properly, check items shown in the following table.
HOW TO RESET THE UNIT ENGLISH GENERAL MALFUNCTION If the equipment malfunctions, this may be because an electrostatic discharge or AC line interference has corrupted the information in the equipment memory circuits. Therefore: - disconnect the plug from the AC line supply - after waiting at least three minutes, reconnect the plug to the AC line supply - re-attempt to operate the equipment AV SURROUND RECEIVER SR7300 SURROUND VOLUME CLEAR MEMORY SPEAKRS A/B SELECT TUNING 7.
ENGLISH TECHNICAL SPECIFICATIONS FM TUNER SECTION Frequency Range .................................... 87.5 - 108.0 MHz Usable Sensitivity ................................ IHF 1.8 µV/16.4 dBf Signal to Noise Ratio ....................... Mono/Stereo 76/72 dB Distortion ........................................ Mono/Stereo 0.2/0.3 % Stereo Separation ........................................... 1 kHz 45 dB Alternate Channel Selectivity ................... ± 300 kHz 60 dB Image Rejection ......................
COUNTRY ALGERIE ARMENIA AUSTRALIA AUSTRIA BAHREIN BANGLADESH BELGIUM BULGARIA CANADA CHINA CYPRUS CZECH REPUBLIC DENMARK DUBAI EGYPT ESTONIA F.Y.R.O.M. FINLAND FRANCE GERMANY GREECE HEADQUARTERS EUROPE: HONG KONG HUNGARY ICELAND INDIA IRAN IRELAND ISRAEL ITALY IVORY COAST JAPAN KOREA KUWAIT LATVIA LEBANON LITHUANIA MALAYSIA MALTA MAURITIUS MILITARY MARKET EUROPE NEW ZEALAND NORWAY OMAN POLAND PORTUGAL PROFESSIONAL EUROPE PROFESSIONAL U.S.A.
