R Model SR6200 User Guide AV Surround Receiver
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of suffi-cient magnitude to constitute a risk of electric shock to persons.
IMPORTANT SAFETY INSTRUCTIONS READ BEFORE OPERATING EQUIPMENT 11. This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of. 1. Read Instructions - All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions-The safety and operating instructions should be retained for future reference. 3.
19. Servicing-Do not attempt to service this video product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 20. Damage Requiring Service-Unplug this video product from the wall outlet and refer servicing to qualified service personnel under the following conditions: 21.
a s d fg h L j k R R L CD L OUT R PRE OUT ANTENNA FRONT FRONT TAPE MONITOR MONI TOR SURR. TAPE OUT VCR1 OUT VCR1 OUT CDR / MD CDR / MD DSS / VCR2 OUT DSS / VCR2 OUT VCR1 VCR1 VCR1 VCR1 DSS / VCR2 DSS / VCR2 DSS / VCR2 DSS / VCR2 TV TV TV OUT DIG - 4 IN L R SURR. CENTER CENTER OUT DIGITAL IN / OUT AM SUB WOOFER SR6200 SURROUND DIG - 3 IN SUB WOOFER DIG.OUT COAX GND CENTER SURR. CENTER UNSWITCHED 120W 1A MAX DIG - 2 IN FM (75Ω) SURR.
VIDEO SYSTEM CONNECTIONS FOR VIDEO COMPONENTS DVD PLAYER VIDEO IN (FRONT AUX CONNECTIONS) AUDIO VIDEO S-VIDEO IN OUT IN OUT IN AUDIO OUT S-VIDEO IN AUX INPUT S-VIDEO CVBS L R L R VCR DIGITAL AUDIO VIDEO S-VIDEO OUT OUT OUT OUT L R MONITOR TV VIDEO AUDIO OUT OUT L R VIDEO CAMERA L R R L To household power outlet CD L OUT R PRE OUT FRONT TAPE MONITOR MONI TOR TAPE OUT VCR1 OUT VCR1 OUT CDR / MD CDR / MD DSS / VCR2 OUT DSS / VCR2 OUT VCR1 VCR1 VCR1 VCR1 DSS / VCR2 DSS / VCR
AUDIO SYSTEM CONNECTIONS FOR AUDIO COMPONENTS MD PLAYER CD PLAYER CD RECORDER SPEAKER SYSTEM SURROUND SPEAKER OUTPUT DIGITAL OUTPUT L DIGITAL INPUT DIGITAL INPUT R OUT IN (R) L L R R NORMAL INPUT INVERT OUTPUT (L) SUB WOOFER DIGITAL OUTPUT (R) (L) CENTER SPEAKER SUBWOOFER AMPLIFIER (MA6100) AM LOOP ANTENNA AM EXTERNAL ANTENNA L R R L CD L OUT R PRE OUT FRONT TAPE MONITOR MONI TOR TAPE OUT VCR1 OUT VCR1 OUT CDR / MD CDR / MD DSS / VCR2 OUT DSS / VCR2 OUT VCR1 VCR1
INTRODUCTION .............................................................................................................................................................. 2 DESCRIPTION ................................................................................................................................................................. 2 FEATURES .........................................................................................................................................................
ENGLISH INTRODUCTION FEATURES Thank you for purchasing the Marantz SR6200 DTS/Dolby Digital Surround receiver. This remarkable component has been engineered to provide you with many years of home theater enjoyment. Please take a few minutes to read this manual thoroughly before you connect and operate the SR6200. As there are a number of connection and configurations options, you are encouraged to discuss your own particular home theater setup with your Marantz A/V specialist dealer.
When this button is pressed, the tone control circuit is bypassed as well as Bass Management. Notes: The surround mode is automatically switched to AUTO when the source direct function is turned on. Additionally, Speaker Configurations are fixed automatically as follow. Front SPKR = Large Center SPKR = Large Surround SPKR = Large Surround Center SPKR = Yes Sub woofer = Yes q POWER switch and STANDBY indicator When this switch is pressed once, the unit turns ON and display appears on the display panel.
ENGLISH ¡1 DIGITAL inputs REAR PANEL CONNECTIONS (SEE PAGE iii.) Dig.1,2 (Optical) and Dig. 3, 4 (Coaxial) Connect each input to the digital output of your source equipment. Use the system setup menu to assign digital input to appropriate source. (see page. 12) All connections to the rear panel should be made with the entire system powered off. To avoid errors, it is advisable to connect one cable at a time between the various components.
REMOTE CONTROL BUS CONNECTIONS ENGLISH This unit is equipped with a remote control function. By connecting this unit’s remote control jacks to a Marantz CD player or tape deck equipped with remote control (RC-5) jacks, it allows system remote control to operate. Connect REMOTE CONTROL OUT jack of SR6200 to REMOTE CONT. IN of other Marantz equipment, i.e. CD player or tape deck, by using an RCA pin cable.
ENGLISH REMOTE CONTROL OPERATION FUNCTION AND OPERATION • The remote control unit (RC6200SR) provided with the SR6200 is a “learning”-type, programmable unit capable of controlling almost any component in your system, as well as the Marantz D-BUS components (RC-5). The components to be controlled can be selected with one slide switch x and nine buttons ¤6, except AUX button.
⁄4 DIMMER button This button is used to start preset scan when SR6200 is selected TUNER mode. When this button is pressed once, the display is dimmed. When this button is pressed twice, the display is turned off and the “DISPLAY OFF” indicator lights up. Press this button again to turn on the display again. m MEMO button Memory enable button for various preset functions.
Note: When the system mode switch is in the USER position, the buttons which have not learned any function output the D-BUS (RC-5) codes when they are pressed. In the RC-5 (D-BUS) position, all buttons output the D-BUS (RC-5) codes. Press one of these buttons once or twice to select a particular source component. For example, to set the amplifier or receiver to the DVD input, press the DVD button ¤6 twice within 2 seconds. Note: CDR/MD button is set CDR function at initial.
LEARN TX RC-5/6 USER LEARN AMP SOURCE POWER S1 3 MAIN POWER OFF ON 1 2 AUTO TV S2 DTS 5 6 SLEEP 4 CS5.1 7 8 SURROUND MODES DSP 6-STEREO S1 S2 S3 S4 S5 S6 S7 S8 S9 S10 AMP TV DVD VCR1 DSS/VCR2 AUX TUNER CD TAPE CDR/MD 1 SYSTEM NAME MAIN POWER ON (Can not learn) 0 2 MAIN POWER OFF (Can not learn) 0 3 SOURCE POWER 4 SLEEP 1 1 5 AUTO 1 1 6 2 1 1 7 DTS 1 1 8 CS5.1 1 1 9 6.
ENGLISH OPERATION OF REMOTE CONTROL UNIT 1. Remote control The distance between the transmitter of the remote control unit and the IR SENSOR of the SR6200 should be less than about 5 meters. If the transmitter is pointed to a direction other than the IR SENSOR or if there is an obstacle between them, remote control may not be possible. Remote-controllable range SR6200 p Ap rox .
ENGLISH SET-UP After all components are connected, initial setup must be performed. ON SCREEN DISPLAY (OSD) MENU SYSTEM The SR6200 incorporates an on-screen menu system, which makes various operations possible by using the cursor ( , , , ) and OK buttons on the remote controller. The settings made with these buttons are also shown in the on-screen display.
SYSTEM SETUP 2/2 (SELECTING THE DIGITAL INPUT) ENGLISH OSD MAIN MENU 1. 2. Four digital inputs can be assigned for the desired source. Use this menu to determine which source is connected to which input. Press the AMP button ¤6. Press the MENU button ¤0 to display the “MAIN MENU” of the onscreen display menu. Choose a desired item in the contents with or button, and press the OK button to select. Display will change to menu for each item.
Select the type of front speakers with or button. Select the type of center speaker with or button. Select the type of surround speakers with or button. Select the surround center speaker YES or NO with or button. SUBWOOFER: Select the subwoofer speaker YES or NO with or button. The home theater system you already have installed should function provided that there are left, center and right front speakers, left and right rear/surround speakers and a subwoofer.
ENGLISH SURROUND MODE SOURCE DIRECT : Switch the source direct ON or OFF with or button. This bypasses the surround processing and crossover for the main speakers (front left and right will be full range and the subwoofer will be ON) Note: Surround mode cannot be changed in Source Direct mode. SURR-MODE : Select the surround mode with or button. NIGHT MODE : Switch the NIGHT MODE ON or OFF with or button. Selecting the Night Mode ON is effective in Dolby Digital only, and it compresses the dynamic range.
3. Recalling a Preset Station 1. Press the F/P button !5 to change the display to preset. 2. Select the desired preset station by pressing TUNING/PRESET or button !4 on the front panel or press CHANNEL button , on the remote. LISTENING TO THE TUNER MANUAL TUNING 1. 2. 3. 4. 5. To select the tuner as the source, press the TUNER button t on the front panel or press the TUNER button ¤6 on the remote.
STATION NAME PRESET (On PRESET display mode) ENGLISH PLAYBACK OPERATION The station name preset function allows the name of each preset channel to be entered using alphanumeric characters. The Station Name button is valid only in the tuner mode. Before station name preset operation, store stations with the preset memory operation. 1. Press the MEMORY button !3 on the front panel or MEMO button m on the remote for more than 3 seconds. 2.
ON SCREEN DISPLAY INFOMATION Set the sleep timer while the power is turned on. 1. Turn the power ON and press the SLEEP button o / c. 2. Press the SLEEP button o / c the number of times to set the desired sleep time in minutes. Each press of the SLEEP button o / c or changes the display in the following order: The on-screen display, which can be activated by the Main unit or remote, appears on the TV screen to show the current setting status of the SR6200. 10 20 1.
ENGLISH 2. FUCTION SELECT & SURROUND MODE 5.SLEEP TIMER When a function selector button or surround mode button is pressed VIDEO: Displays the current video source. When TV,DSS, DVD, VCR1 or AUX is selected with the function selector, both AUDIO and VIDEO shows the same name. AUDIO: Displays the current analog audio input source. DIGITAL: Displays the current digital input source.
The SR6200 incorporates digital signal processors (DSP) which can reproduce various surround effects you experience in concert halls and movie theaters, etc. These Surround Modes, are provided to reproduce a variety of surround sound effects, according to the content of the source to be played. FEATURES Surroud mode 1. AUTO When this mode is selected, the receiver determines whether the digital input signal is Dolby Digital, PCM-audio or DTS.
The relation between the selected surround mode and the input signal ENGLISH The surround mode is selected with the surround mode selector knob of the SR6200 or the remote control unit. However, the sound from the speakers depend upon the relationship between the selected surround mode and the input signal. They are as follows; Surround Input Signal Mode Auto Dolby Digital (5.1ch) Dolby Digital (2ch) Dolby Digital (2ch:Lt/Rt) 96kHz PCM PCM(Audio) Analog DTS (5.1ch) Stereo Dolby Digital (5.
If the unit does not operate properly, check items shown in the following table. If your trouble cannot be recovered with the remedy actions listed in the following table, malfunction of the internal circuitry is suspected; immediately unplug the power cable and contact your dealer, nearest Marantz distributor or the Marantz Service Center in your country. In case of trouble, check the following before calling for service: 1. Are the connections made properly ? 2.
GENERAL MALFUNCTION ENGLISH If the equipment malfunctions, this may be because an electrostatic discharge or AC line interference has corrupted the information in the equipment memory circuits.
TECHNICAL SPECIFICATIONS FM TUNER SECTION Frequency Range ................................................................................................................................................. 87.5 - 108.0 MHz Usable Sensitivity ............................................................................................................................................. IHF 1.8 µV/16.4 dBf Signal to Noise Ratio ........................................................................................
COUNTRY ALGERIE ARMENIA AUSTRALIA AUSTRIA BAHREIN BANGLADESH BELGIUM BULGARIA CANADA CHINA CYPRUS CZECH REPUBLIC DENMARK DUBAI EGYPT ESTONIA F.Y.R.O.M. FINLAND FRANCE GERMANY GREECE HEADQUARTERS EUROPE: HONG KONG HUNGARY ICELAND INDIA IRAN IRELAND ISRAEL ITALY IVORY COAST JAPAN KOREA KUWAIT LATVIA LEBANON LITHUANIA MALAYSIA MALTA MAURITIUS MILITARY MARKET EUROPE NETHERLANDS NEW ZEALAND NORWAY OMAN POLAND PORTUGAL PROFESSIONAL EUROPE PROFESSIONAL U.S.A.
