Model SR4002/SR5002 User Guide AV Surround Receiver SR4002-5002U DFU_00_cover.indd I Downloaded from www.Manualslib.com manuals search engine 07.7.
IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
13. 14. 15. 16. 17. 18. Power-Cord Protection – Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying par ticular attention to cords at plugs, convenience receptacles, and the point where they exit from the product. Protective Attachment Plug – The product is equipped with an attachment plug having overload protection. This is a safety feature. See Instruction Manual for replacement or resetting of protective device.
TABLE OF CONTENTS INTRODUCTION ....................................1 BASIC OPERATION (PLAYBACK)......34 ACCESSORIES CHECK ....................................................1 SELECTING AN INPUT SOURCE ...................................34 SELECTING THE SURROUND MODE...........................34 NIGHT MODE ..................................................................34 ADJUSTING THE MAIN VOLUME ..................................34 ADJUSTING THE TONE (BASS & TREBLE) CONTROL...
ENGLISH FEATURES An easy-to-use universal remote controller allows full access to all of the operating functions and can be used for system operation as well. This unit incorporates the latest generation of digital surround sound decoding technology such as Dolby Digital EX, Dolby Digital, DTS-ES (Discrete 6.1 and Matrix 6.1), DTS Neo:6 (Cinema, Music), Dolby ProLogic IIx (Movie, Music and Game), Circle Surround II (Cinema and Music). In addition, Marantz has focused on the future.
Dolby Pro Logic IIx is fully compatible with Dolby Surround Pro Logic technology and can optimally decode the thousands of commercially available Dolby Surround encoded video cassettes and television programs with enhanced depth and spatiality. It can also process any high-quality stereo or Advanced Resolution 5.1-channel music content into a seamless 6.1- or 7.1-channel listening experience.
ENGLISH BEFORE USE This section must be read before any connection is made to the mains supply. EQUIPMENT MAINS WORKING SETTING Your Marantz product has been prepared to comply with the household power and safety requirements that exist in your area. SR4002/SR5002 can be powered by 120V AC only. KEEP OBJECTS OFF LOADING BATTERIES CAUTIONS ON BATTERIES Keep objects off the unit. Blocking the vent can result in accident and damage.
When this switch is pressed once, the unit turns ON and the display illuminates. When pressed again, the unit turns OFF and the STANDBY indicator will be illuminated. FRONT PANEL (SR4002) qw e rt y u i o !0 !1 !2 !3 !4 w VOLUME DISP SLEEP MULTI AUTO AUTO SURR TUNED DIRECT ST V – OFF DISC 6.1 NIGHT MTX 6.
ENGLISH !4 ATT (Attenuate) button @1 MENU button Press this button to reduce the analog audio signal input level by about half. “ATT” indicator will be illuminated in the display. (See page 39) Press this button to enter the SETUP MAIN MANU. !5 Press this button to turn on or off HT(Home Theater)EQ mode. This mode compensates for the audio portion of a movie sounding “bright”. “EQ” indicator will be illuminated in the display.
s ™0 f a d DISP MULTI SLEEP h g AUTO AUTO SURR TUNED DIRECT j ST V – OFF DISC 6.1 k ¡0 ¡2 ¡4 l ¡1 ¡3 PEAK ATT ANALOG SURROUND SPKR B EQ DIGITAL DIGITAL NIGHT MT X 6.1 ¡5 L SL ¡9 a DISP (Display Off) indicator ¡8 j C S ¡7 ¡6 V (video)-OFF mode indicator s k d Multi-room system indicator This indicator is illuminated when the multi-room system is active.
q ENGLISH REAR PANEL (SR4002) w !1 q t r !3 INPUT 1 VIDEO !6 HDMI Ver 1.1 INPUT 3 COMPONENT VIDEO MONITOR OUT S-VIDEO FM (75 75)) GND AM ANTENNA TV L SL C DVD VCR IN VCR OUT DSS MONITOR OUT INPUT 2 CB/PB Y CR/PR CB/PB Y INPUT 3 OUTPUT 4 1 R SR SW 7.1CH INPUT INPUT 2 IN 3 R (AUX2 AUX2)) INPUT 1 CR/PR SBL L SBR IN TV DVD IN OUT VCR DSS OUT TAPE SL C FLASHER IN OPT OUT DIGITAL OUT REMOTE CONT. DIGITAL IN w L R FRONT R SR SW L R SURROUND BACK S.
Subwoofer Output Connect this jack to the line level input of a powered subwoofer. If an external subwoofer amplifier is used, connect this jack to the subwoofer amplifier input. If you are using two subwoofers, either powered or with a 2 channel subwoofer amplifier, connect a “Y” connector to the subwoofer output jack and run one cable from it to each subwoofer amplifier. !1 7.
ENGLISH z REMOTE CONTROLLER The provided remote controller is a universal remote controller. The POWER button, numeric buttons and control buttons are used in common across different input source components. The input source controlled with the remote controller changes when one of the input selector buttons is pressed. ‹5 z x c v b n LEARN SOURCE SET OFF ON DISPLAY P.DIRECT SURROUND dts LIP SYNC/ INPUT l/ SLEEP AUTO 1 CS 2 3 BAND EX/ES VIRTUAL T.
P.DIRECT button When this button is pressed, the tone control circuit is bypassed. ¤6 VOLUME +/- buttons This button is used to adjust the volume for the amplifier and television. Note: ¤1 BAND/LIP SYNC/INPUT button ‹3 ¤7 (When AMP mode is selected) This button is used to select LIP SYNC mode. (When AMP mode is selected) This button is used to turn on and off multi speaker. ¤2 T.
ENGLISH REMOTE CONTROL OPERATION GENERAL INFORMATION OF REMOTE CONTROLLER TO THE UNIT To control the unit by your remote controller, you have to select the device AMP or TUNER by pressing the SOURCE button. Please refer below for the details in AMP and TUNER mode. AMP MODE TUNER MODE LEARN SOURCE SEND SET OFF ON DISPLAY P.DIRECT SURROUND dts LIP SYNC/ INPUT l/ SLEEP AUTO 1 2 CS 4 M-CH ST 3 EX/ES VIRTUAL 5 6 STEREO 7 T.MODE NIGHT 8 P.SCAN 9 7.
1. 2. Press the desired SOURCE button. Press the desired operation buttons to play the selected component. • For details, refer to the component’s user guide. • It may not be possible to operate some models. CONTROLLING A MARANTZ DVD PLAYER (DVD MODE) LEARN SOURCE SEND SET OFF ON DISPLAY P.DIRECT SURROUND dts LIP SYNC/ INPUT l/ SLEEP AUTO 1 2 3 BAND EX/ES VIRTUAL T.MODE 5 6 STEREO NIGHT CS 4 M-CH ST 7 CH/ CAT P.SCAN 8 9 7.
ENGLISH CONTROLLING A MARANTZ CD RECORDER (CDR MODE) LEARN SOURCE SEND SET OFF ON DISPLAY P.DIRECT SURROUND dts LIP SYNC/ INPUT l/ SLEEP AUTO 1 2 3 BAND EX/ES VIRTUAL T.MODE 4 5 6 M-CH ST STEREO NIGHT CS 7 8 9 7.1CH IN A/D HT-EQ MEMO 0 +10 SPKR A/B MUTE MULTI/ CAT M-SPKR CL CH/ CAT P.
ENGLISH CONTROLLING A MARANTZ UNIVERSAL DOCK (AUX1 MODE) LEARN SOURCE SEND SET OFF ON DISPLAY P.DIRECT SURROUND dts LIP SYNC/ INPUT l/ SLEEP AUTO 1 CS 2 3 EX/ES VIRTUAL 4 5 6 M-CH ST STEREO NIGHT 7 8 9 7.1CH IN A/D CH/ CAT P.SCAN HT-EQ 0 +10 SPKR A/B MUTE MULTI/ CAT M-SPKR CL T.MODE MEMO VOLUME INFO SOURCE ON / OFF POWER OFF POWER ON INFO MENU ENTER CURSOR UP CURSOR DOWN Pause Play Stop Previous/Next P.
ENGLISH BASIC OPERATION NORMAL MODE (When operating Marantz AV equipment products) This remote controller is preset with a total of 12 types of remote codes, including Marantz TV (television), DVD, VCR (VCR deck), DSS (satellite broadcasting tuner), TUNER, CD, CD-R, MD, TAPE (tape deck), AUX1, AUX2, and AMP (amplifier). Learning is not necessary for Marantz products. You can use these products without setting any codes. Importants: • Some codes may be not match your equipment.
4. This remote controller is capable of learning and storing codes used by other remote controls that you already own. For codes which are not learned, the remote controller will transmit either the Marantz preset codes from the initial settings, or remote codes from another manufacturer’s AV equipment which is set by the customer. The receiver sensor for the remote controller signals is located at the top of the remote controller. Notes: • This remote controller is capable to learn around 60 codes.
ENGLISH CONNECTIONS SPEAKER PLACEMENT The ideal surround speaker system for this unit is 7speaker systems, using front left and right speakers, a center speaker, surround left and right speakers, a surround back left and right speakers, and a subwoofer. For best results we recommend that all front speakers be of the same type, with identical or similar driver units. This will deliver smooth pans across the front sound stage as the action moves from side to side.
Tape Deck CD player CD recorder DIGITAL OUTPUT DIGITAL INPUT DIGITAL OUTPUT ENGLISH CONNECTING AUDIO COMPONENTS OUT IN L L R R OUT IN L L R R L R L R Analog Audio L R Note: Be sure to connect the positive and negative cables for the speaker properly. If they are miss-connected, the signal phase will be reversed and the signal quality will be corrupted.
ENGLISH VIDEO, S-VIDEO , COMPONENT JACKS CONNECTING VIDEO COMPONENTS There are 3 types of video jacks on the rear panel. DIGITAL OUT Y Y CB / PB CR / PR VIDEO jack The video signal for the VIDEO jacks is the conventional composite video signal. S-VIDEO OUT S-VIDEO jack The video signal is separated into luminance (Y) and color (C) signals for the S-VIDEO jack. The S-VIDEO signals enables high-quality color reproduction. If your video component has an S-VIDEO output, we recommend to use it.
HDMI JACK This unit has 3 HDMI inputs and one HDMI output. It can send digital video and audio signals from DVDs and other sources directly to a display. It minimizes signal degradation caused by analog conversion so that high quality images can be enjoyed. Select an input source from the OSD menu system. (See page 27) Notes: • When the HDMI output is connected to a display monitor that does not support HDCP*, signals are not output.
ENGLISH ADVANCED CONNECTING CONNECTING THE REMOTE CONTROL JACKS INPUT 1 INPUT 3 COMPONENT VIDEO MONITOR OUT 2 1 DVD VCR IN VCR OUT DSS MONITOR OUT INPUT 2 CB/PB Y CR/PR CB/PB Y 4 1 IN R L R L R L R L DVD R L OUT VCR IN DSS OUT TAPE IN OUT CD/CDR CR/PR CB/PB Y 2 INPUT 1 CR/PR IN 5 2 RC OUT 3 DIGITAL IN OPT OUT DIGITAL OUT REMOTE CONT.
AM Loop Antenna FM External Antenna Connecting the supplied FM antenna The supplied FM antenna is for indoor use only. During use, extend the antenna and move it in various directions until the clearest signal is received. Fix it with push pins or similar implements in the position that will cause the least amount of distortion. If you experience poor reception quality, an outdoor antenna may improve the quality.
ENGLISH XM RADIO OVERVIEW (SR5002 ONLY) SR5002 is the XM Ready® receiver. You can receive XM Satellite Radio® by connecting to the XM Mini-Tuner and Home Dock (sold separately) and subscribing the XM service. CONNECTING THE XM CONNECT-AND-PLAY ANTENNA • Plug the XM Mini-Tuner and Home Dock into XM terminal on the rear panel. • Position the XM antenna near a south-facing window to receive the best signal. When making connections, also refer to the operating instructions of the XM Mini-Tuner and Home Dock.
Bi-amp Connection A bi-amp connection is possible with speakers that have two sets of inputs (for treble and bass). This allows you to drive the treble and bass units with separate channel amps, which enables better sound quality. Connect the speakers as shown in the figure. Set the SPEAKER C selector switch on the rear panel to ON.
ENGLISH CONNECTING OTHER EQUIPMENT a d INPUT 1 VIDEO INPUT 3 S-VIDEO FM (75 75)) GND TV L SL C DVD VCR IN VCR OUT DSS MONITOR OUT INPUT 2 CB/PB Y CR/PR CB/PB Y 4 1 R SR SW 7.1CH INPUT CR/PR Y SBL L R (AUX2 AUX2)) SBR MULTI. OUT IN TV DVD OUT VCR IN DSS OUT TAPE HDMI Ver 1.1 MONITOR OUT 2 1 AM ANTENNA s COMPONENT VIDEO IN OUT CD/CDR CB/PB INPUT 1 CR/PR IN INPUT 2 INPUT 3 OUTPUT XM 5 2 DIGITAL IN 3 OPT OUT DIGITAL OUT REMOTE CONT.
SETUP MAIN MENU After all components are connected, initial setup must be performed. 1-1 INPUT SETUP FUNC:MODE :DIG:HDMI:COMP -----------------------TV :AUTO : 5 : : DVD :AUTO : 1 : 1 : 1 VCR :AUTO : 3 : 3 : 3 DSS :AUTO : 2 : 2 : 2 AUX1:AUTO : F : : - ON SCREEN DISPLAY MENU SYSTEM This unit incorporates an on-screen menu system, which makes various operations possible by using the cursor (3, 4, 1, 2) and ENTER buttons on the remote control or on the front panel.
ENGLISH 1 INPUT SETUP (ASSIGNABLE DIGITAL INPUT AND COMPONENT VIDEO INPUT) Use this menu to select the input jack to be assigned to the input source. 1. Select “INPUT SETUP” in SETUP MAIN MENU with 3 or 4 cursor button, and press the ENTER button. Notes: • When the TUNER is fixed to the analog input, you can not select any digital input. • When a DTS-LD or DTS-CD is playing, this setup is not available. This is to avoid noise being generated from the analog input.
SURR. BACK SIZE LARGE: Select if the surround back speaker is large. SMALL: Select if the surround back speaker is small. Note: If “NONE” is selected for the Surround L/R setting, then this setting is not available. LPF/HPF When you use a subwoofer, you can select the cutoff frequency for the small speakers used. Select one of the crossover frequency levels according to the size of the small speaker connected.
ENGLISH MRAC (Marantz Room Acoustic Calibration) Speaker settings that were difficult by MANUAL setup can now be made by automatically measuring speaker characteristics using the including microphone.
Error Indications During Measurement If trouble occurs during measurement, an error message is displayed on the monitor screen and FL display. Those errors and their remedies are described below. The message appearing on the FL display is given in ( ). MIC SETUP ERROR (MIC SET ERROR) The microphone (MC-10) is not properly connected. → Check the microphone connection. AMBI NOISE ERROR (AMBI NOISE ER) Measurement cannot be done correctly because of excessive ambient noise.
ENGLISH 5 PL II (PRO LOGIC II) MUSIC PARAMETER 6 CS II (CIRCLE SURROUND II) PARAMETER 6 CSII PARAMETER Pro Logic II-Music mode creates a rich and enveloping surround ambience from stereo sources such as CDs. In this mode, SR4002/SR5002 includes three controls to fine-tune the soundfield as follows. TRUBASS SRS DIALOG : 0 : 0 7 7.1 CH INPUT LEVEL SR5002 has features in MULTI ROOM SYSTEM such as source selector, sleep timer, Multi Room Speaker output and remote control.
You can setup the speaker conditions quickly with SIMPLE SETUP menu. In this menu, the number of speakers and speaker delay time can be set. These settings can be changed more detail in “2. SPEAKER” setup menu. Press the SIMPLE SETUP button on the unit to enter this menu. 1. 2. 4. 3. 5.
ENGLISH BASIC OPERATION SELECTING THE SURROUND MODE ADJUSTING THE MAIN VOLUME Example: AUTO SURROUND (PLAYBACK) VOLUME SOURCE SET OFF ON DISPLAY P.DIRECT SURROUND DOWN INPUT SELECTOR SLEEP SELECTING AN INPUT SOURCE AUTO 1 MULTI SPEAKER MULTI SURROUND MODE PURE DIRECT AUTO AV SURROUND RECEIVER SR5002 DISC+ ANGLE SUB TITLE CH-SEL V-OFF ATT.
Notes: • The component video signal is emitted only from component video output terminal. When the video equipment is connected by component terminal, connect the monitor and SR4002/SR5002 by the component terminal. • This function is unavailable for the REC out terminal. • This function is unavailable for the still picture, fast forward and reverse playing of the video component.
ENGLISH SURROUND MODE This unit is equipped with many surround modes. These are provided to reproduce a variety of surround sound effects, according to the content of the source to be played. The available surround modes may be restricted depending on the input signal and speaker setup. The relation between the selected surround mode and the input signal The surround mode is selected with the surround mode selector on this unit or the remote controller.
EX/ES 2 MODE dts MODE When this mode is selected, the unit determines whether the digital input signal is Dolby Digital, Dolby Digital Surround EX, DTS, DTS-ES, DTS 96/24 or PCM-audio. Surround EX & DTS-ES will operate for multichannel source that has a Dolby Digital Surround EX or DTSES auto trigger flag in the digital signal. When a Dolby Digital or DTS signal is input, the number of channels for which the corresponding signal is encoded will be played.
ENGLISH CIRCLE SURROUND II (CSII-CINEMA, CSII-MUSIC, CSII-MONO) Circle Surround is designed to enable multichannel surround sound playback of non-encoded and multichannel encoded material. Backward compatibility provides listeners with up to 6.1 channels of surround performance from entire collection of music and film, including broadcast, videotape and stereo recorded music. Depending on source material, you can select CSIICinema mode, CSII-Music mode or CSII-Mono mode.
DISPLAY MODE ER SR5002 LEARN SOURCE SEND SET OFF ON DISPLAY P.DIRECT SURROUND l/ SLEEP SURROUND MODE PURE DIRECT AUTO HT-EQ SIMPLE SETUP DISPLAY MEMORY CLEAR EXIT BAND T-MODE AUTO ENTER MENU 1 dts 2 3 EX/ES VIRTUAL 4 5 6 M-CH ST STEREO NIGHT 7 8 9 CS LIP SYNC/ INPUT T.MODE In normal operation, the audio or video source selected for listening through this unit is sent to the record outputs.
ENGLISH LISTENING THROUGH HEADPHONES DOLBY HEADPHONE MODE This jack may be used to listen to the unit’s output through a pair of headphones. Be certain that the headphones have a standard 1/4” stereo phono plug. Note that the speakers will automatically be turned off when the headphone jack is in use. ATTENUATION TO ANALOG INPUT SIGNAL This feature simulates the waveforms of the actual sounds heard from the speakers.
M-CH ST AV SURROUND RECEIVER SR5002 7 INPUT SELECTOR MULTI SPEAKER MULTI STEREO SURROUND MODE PURE DIRECT AUTO HT-EQ 2. 4. NIGHT 8 9 7.1CH IN A/D 0 +10 SPKR A/B MUTE MULTI/ CAT M-SPKR CL CH/ CAT P.SCAN HT-EQ MEMO VOLUME STANDBY POWER ON/STANDBY SETUP MIC INFO PHONES MENU TV AUTO ON/OFF FUNCTION If you don’t need to connect 7.1 Ch. input terminals with multi channel decoder, L(front left) and R (front right) inputs terminals are available as AUX2 input.
ENGLISH (FM) TUNING MODE (AUTO STEREO OR MONO) MANUAL TUNING BASIC OPERATION SLEEP 2. (TUNER) 1. DISPLAY P.DIRECT SURROUND SOURCE 1. LISTENING TO THE TUNER LIP SYNC/ INPUT dts 1 2 3 BAND EX/ES VIRTUAL T.MODE SLEEP DOWN 4 5 6 M-CH ST STEREO NIGHT UP 1 CS 7 8 DISPLAY 9 CLEAR MEMORY MUTE EXIT BAND T-MODE DIGITAL REC PURE DIRECT ATT SIMPLE SETUP DISPLAY MEMORY CLEAR EXIT BAND T-MODE T.DISP PTY - PRESET DISC+ + - ANGLE SUB TITLE V-OFF ATT.
(Using the remote controller) 1. 1. 2. 3. Tune into the radio station you desire (Refer to the “MANUAL TUNING” or “AUTO TUNING” section). Press the MEMO button on the remote controller. “– –“ (preset number) starts blinking on the display. Enter the desired preset number by pressing the numeric buttons. Note: When entering a single digit number (2 for example), either input “02” or just input “2” and wait for a few seconds. INPUT SELECTOR 1. DISPLAY AUTO dts 1 1.
ENGLISH CHECKING THE XM SIGNAL STRENGTH AND RADIO ID LISTENING TO XM SATELLITE RADIO (SR5002 ONLY) 3. ENTER SELECTING AN INPUT SOURCE T.TONE /SET UP Before you can listen to XM Satellite Radio, you must first select the input source on the SR5002. SOURCE 1. SET OFF Select channel 0 (XM000) with the 3 or 4 cursor buttons of the SR5002 or the Q or R buttons of the remote controller. EXIT REC T.DISP PTY 3. F.DIRECT PRESET + - TUNING + 1. T.TONE /SET UP T.
2. When you press the INFO button, the following information will be displayed. N A M E / T I T L E VIDEO AUDIO P i n k F l o i d F l o i d / :DVD :XM / The “NAME/TITLE” is displayed for 2 seconds, followed by the artist’s name and song title. (If artist’s name or song title is more than 13 characters long, the text is scrolled.) 1. When this display appears, press the INFO button again. XM information like the following will appear. 3. VOLUME INFO T.DISP PTY F.
ENGLISH CATEGORY SEARCH MODE (Using the SR5002) You can select the desired channel from the category allocated to each channel. Category being aired can be only selected. 1. Turn the INPUT SELECTOR knob to select “TUNER”. 2. 3. 4. Press the BAND button to select XM band. 5. After selecting the Category, Press the 3 or 4 cursor button to select the desired station of the category. 6. You can return to the normal mode by press the ENTER button during Category Search Mode. 1. 5. 3. 6.
AUTO 2 3 BAND EX/ES VIRTUAL T.MODE 2.4. SOURCE SET OFF ON DISPLAY P.DIRECT SURROUND dts LIP SYNC/ INPUT AUTO 1 CS 4 M-CH ST 2 3 EX/ES VIRTUAL 7 PURE DIRECT SIMPLE SETUP DISPLAY MEMORY CLEAR 5 6 STEREO NIGHT EXIT BAND T-MODE HT-EQ MENU 9 A/D 0 +10 SPKR A/B MUTE MULTI/ CAT M-SPKR CL ENTER AUTO 8 7.1CH IN CH/ CAT P.SCAN HT-EQ MEMO VOLUME CH/ CAT 5 6 STEREO NIGHT 7 4 5 6 M-CH ST STEREO NIGHT 7 2. VIRTUAL 8 P.SCAN 9 7.
ENGLISH MULTI ROOM SYSTEM (SR5002 only) The Multi Room system is a function which allows you to listen to the same or a different source in a room other than the room in which the SR5002 is located. The operations possible with the multi room function are explained briefly below. For details, refer to the instruction manual supplied with the multi room remote controller and SR5002.
(SR4002 only) The Surround Speaker B system is a function which allows you to listen to the same source in a room other than the room in which the SR4002 is located. The operations possible with the Surround speaker function are explained briefly below. ANOTHER ROOM PLAYBACK USING THE S (SURROUND) SPEAKER B TERMINALS The SR4002 allows you to connect another set of speakers and place them in a another room or separated area for listening to music.
ENGLISH TROUBLESHOOTING SYMPTOM Can not select EX/ES mode. In case of trouble, check the following before calling for service: 1. Are the connections made properly ? 2. Are you operating the unit properly following the user’s guide ? 3. Are the power amplifiers and speaker working properly ? If the unit does not operate properly, check items shown in the following table.
SYMPTOM CAUSE The display does not appear The connected monitor or projector does not support HDCP. over an HDMI connection. The HDMI input of on the TV is not on. REMEDY • Connect to equipment that supports HDCP. • Please change the method of connection. ENGLISH HDMI Set HDMI input so that it turns on, as explained in the TV’s instruction manual. The HDMI output on the source component (DVD, Set Top Box, Set HDMI output so that it turns on, as explained in the source component’s instruction manual.
ENGLISH XM SATELLITE RADIO 7.1 CH INPUT (SR4002) MULTI (SR5002) If a problem should arise, first check the following. ATT INPUT SELECTOR 1. Are the connections correct? 2. Have you operated the receiver according to the operating instructions? 3. Are the speakers and other components operating properIy? DOWN PURE DIRECT SIMPLE SETUP CAUSE REMEDY “NO SIGNAL” is displayed. The signal cannot be received. Reposition your XM Mini-Tuner and Home Dock. Contact XM Radio.
ENGLISH TECHNICAL SPECIFICATIONS AUDIO SECTION (SR4002) Power Output (20 Hz – 20 kHz/THD=0.08%) Front L&R................................................8 ohms 80 W / Ch Center .....................................................8 ohms 80 W / Ch Surround L&R .........................................8 ohms 80 W / Ch Surround Back L&R ................................8 ohms 80 W / Ch Front L&R............................................. 6 ohms 105 W / Ch Center .............................................
SETUP CODES TV Acer .......................................................... 1141 Admiral .................................1002, 1009, 1089 Aiko .......................................................... 1059 Aiwa................................................1117, 1118 Akai .......................................................... 1001 Amtron ...................................................... 1023 Anam ........................................................ 1113 Anam National......................
Dimensia ..............................3004, 3063, 3085 Dixon ..............................................3077, 3081 Dynatech .................................................. 3035 Electrohome ............................................. 3052 Electrophonic ........................................... 3052 Emerson .................... 3009, 3015, 3016, 3017 3018, 3019, 3022, 3035 3047, 3052, 3054, 3073 Fisher .............................................3029, 3032 Fuji.....................................
Hughes ...........................................4001, 4016 Janeil ........................................................ 4025 JVC........................................................... 4017 Mitsubishi ................................................. 4001 Panasonic.......................................4004, 4010 Philips .............................................4031, 4035 Proscan ..................... 4002, 4008, 4009, 4011 Radio Shack ...................................4036, 4037 RCA ..........
www.marantz.com You can find your nearest authorized distributor or dealer on our website. is a registered trademark. Printed in China SR4002-5002U DFU_02_setup.indd iv Downloaded from www.Manualslib.com manuals search engine 07/2007 00M32CW851250 mzh-d 07.7.
