R Model SR4200 User Guide AV Surround Receiver
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of suffi-cient magnitude to constitute a risk of electric shock to persons.
IMPORTANT SAFETY INSTRUCTIONS READ BEFORE OPERATING EQUIPMENT 11. This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of. 1. Read Instructions - All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions-The safety and operating instructions should be retained for future reference. 3.
19. Servicing-Do not attempt to service this video product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 20. Damage Requiring Service-Unplug this video product from the wall outlet and refer servicing to qualified service personnel under the following conditions: 21.
A BCD EF G H J I S-VIDEO VIDEO ANTENNA FM(75Ω) GND AM IN OUT IN K OUT IN IN IN MONITOR OUT DIG-1 L DIG-2 OUT VCR1 DIG-3 DIG-4 IN DVD MONITOR OUT COAXIAL OPUTICAL R CD IN TAPE IN CDR/MD IN OUT OUT DSS/VCR2 IN OUT IN VCR1 OUT DVD IN TV IN COAXIAL OPTICAL INPUT OUTPUT AUDIO REMOTE CONTROL DIGITAL IN/OUT PRE OUT AC OUTLETS (120V ~ 60Hz) SPEAKER SYSTEMS (IMPEDANCE 6 OHMS) MODEL NO. SR4200 – FRONT IN L OUT R – SURR.
VIDEO SYSTEM CONNECTIONS FOR VIDEO COMPONENTS VIDEO SYSTEM CONNECTIONS FOR VIDEO COMPONENTS DVD PLAYER MONITOR TV TV AUDIO VIDEO S-VIDEO OUT OUT OUT VIDEO IN S-VIDEO IN CVBS L R DIGITAL AUDIO VIDEO S-VIDEO OUT OUT OUT OUT L R S-VIDEO VIDEO ANTENNA FM(75‰) GND AM IN OUT IN OUT IN IN DIG-1 L IN MONITOR OUT DIG-2 OUT VCR1 DIG-3 DIG-4 IN DVD COAXIAL MONITOR OUT OPUTICAL R CD IN TAPE IN OUT CDR/MD IN OUT DSS/VCR2 IN OUT IN DVD IN VCR1 OUT TV IN COAXIAL OPTICAL INPUT AUDIO
AUDIO SYSTEM CONNECTIONS FOR AUDIO COMPONENTS AM EXTERNAL ANTENNA CD RECORDER AM LOOP ANTENNA MD PLAYER Assemble the AM loop antenna as shown in the figure before use DIGITAL INPUT FM EXTERNAL ANTENNA IN OUT DIGITAL OUTPUT L L R R DIGITAL INPUT FM FEEDER ANTENNA F-type converter plug (attached) When using the FM antenna attach to this apparatus.
INTRODUCTION .............................................................................................................................................................. 2 DESCRIPTION ................................................................................................................................................................. 2 FEATURES .........................................................................................................................................................
ENGLISH INTRODUCTION FEATURES Thank you for purchasing the Marantz SR4200 DTS/Dolby Digital Surround receiver. This remarkable component has been engineered to provide you with many years of home theater enjoyment. Please take a few minutes to read this manual thoroughly before you connect and operate the SR4200. As there are a number of connection and configurations options, you are encouraged to discuss your own particular home theater setup with your Marantz A/V specialist dealer.
Set the sleep timer function with this button . o DIMMER (Display off) button q POWER switch and STANDBY indicator When this button is pressed once, the display is dimmed. When this button is pressed twice, the display is turned off and the “DISPLAY OFF” indicator lights up. Press this button again to turn the display ON again. When this switch is pressed once, the unit turns ON and display appears on the display panel. When pressed again, the unit turns OFF and the STANDBY indicator lights.
ENGLISH J S-video outputs REAR PANEL CONNECTIONS (SEE PAGE iii.) VCR1 Connect each output terminals to S-video input (REC in) of your video recording equipment. All connections to the rear panel should be made with the entire system powered off. To avoid errors, it is advisable to connect one cable at a time between the various components. K AC power cable Plug into an AC 120V household outlet.
REMOTE CONTROL BUS CONNECTIONS ENGLISH This unit is equipped with a remote control function. By connecting this unit’s remote control jacks to a Marantz CD player or tape deck equipped with remote control (RC-5) jacks, it allows system remote control to operate. Connect RCEMOTE CONTROL OUT jack of SR4200 to REMOTE CONT. IN of other Marantz equipment, i.e. CD player or tape deck, by using an RCA pin cable.
ENGLISH REMOTE CONTROL OPERATION . Numeric buttons 1 to 9 (A, B, C ... Z, –) / Surround mode buttons OPERATION Numeric buttons These buttons are used to enter figures in the selection of a tuner preset station and station name preset or to set select a CD track number, etc. The functions of these buttons are dependent on the function button selected. The provided remote control unit is a universal remote controller. The POWER button x, numeric buttons .
PROGRAMMING THE REMOTE CONTROLLER This button is used to cancel for certain memory or programming operations. The remote controller RC5200SR must be programmed to use the codes for your appliances of different brands. This is done by keying in a 4-digit code or by scanning the codes until the correct one is found. We recommend to using the 4-digit code. This mode is faster and more reliable. The code scanning method should be used only if you cannot find the code for one of your appliances.
ENGLISH Once you have found and the codes for your various appliances, you may want to write them down here. OPERATION OF REMOTE CONTROL UNIT 1. Remote control The distance between the transmitter of the remote control unit and the IR SENSOR of the SR4200 should be less than about 5 meters. If the transmitter is pointed to a direction other than the IR SENSOR or if there is an obstacle between them, remote control may not be possible.
ENGLISH SET-UP After all components are connected, initial setup must be performed. MENU FUNCTION The SR4200 incorporates a menu function, which makes various operations possible by using the cursor ( , , , ) and OK buttons on the remote controller.
ENGLISH SYSTEM SETUP 1. 2. FRONT : Select the type of front speakers with or button. CENTER : Select the type of center speaker with or button. Press the AMP button c. Press MENU button n display the menu. Choose a desired item in the contents with press the OK or button to select. Display will change to menu for each item. or button, and Note: If no operating continues for 1 minute or more, the setup menu is cancelled and the display will return to original.
LFE ATT (LFE attenuater) ENGLISH Select the output level of the LFE signal included in the Dolby Digital signal or the DTS signal. Select 0dB, -10 dB or OFF with or button. The level is ordinarily set to 0 dB. When use DTS Music source, LFE level is set to -10 dB. DIG IN (Digital input) Four digital inputs can be assigned for the desired source. Use this menu to determine which source is connected to which input.
ENGLISH BASIC OPERATION 3. Recalling a Preset Station 1. Press the F/P button !4 to change the display to preset. 2. Select the desired preset station by pressing TUNING/PRESET or button !3 on the front panel or press CHANNEL button ⁄2 on the remote. LISTENING TO THE TUNER MANUAL TUNING 1. 2. 3. 4. 5. To select the tuner as the source, press the TUNER button t on the front panel or press the TUNER button c on the remote.
PLAYBACK OPERATION The station name preset function allows the name of each preset channel to be entered using alphanumeric characters. The Station Name button is valid only in the tuner mode. Before station name preset operation, store stations with the preset memory operation. 1. Press the MEMORY button !2 on the front panel or MEMO button ⁄6 on the remote for more than 3 seconds. 2. The left most column of the station name indicator flashes, indicating the character entry ready status.
ENGLISH SURROUND MODES The SR4200 incorporates digital signal processors (DSP) which can reproduce various surround effects you experience in concert halls and movie theaters, etc. These Surround Modes, are provided to reproduce a variety of surround sound effects, according to the content of the source to be played. FEATURES Surroud mode 1. AUTO When this mode is selected, the receiver determines whether the digital input signal is Dolby Digital, PCM-audio or DTS.
The surround mode is selected with the surround mode buttons of the SR4200 or the remote control unit. However, the sound from the speakers depend upon the relationship between the selected surround mode and the input signal. They are as follows; SURROUND INPUT SIGNAL MODE AUTO DOLBY DIGITAL(5.1CH) DOLBY DIGITAL(2CH) DOLBY DIGITAL(2CH:Lt/Rt) 96KHZ PCM PCM(AUDIO) ANALOG DTS(5.1CH) STEREO DOLBY DIGITAL(5.1CH) DOLBY DIGITAL(2CH) DOLBY DIGITAL(2CH:Lt/Rt) 96KHZ PCM PCM(AUDIO) ANALOG DTS(5.1CH) 2 DOLBY DIGITAL(5.
ENGLISH TROUBLE SHOOTING If the unit does not operate properly, check items shown in the following table. If your trouble cannot be recovered with the remedy actions listed in the following table, malfunction of the internal circuitry is suspected; immediately unplug the power cable and contact your dealer, nearest Marantz distributor or the Marantz Service Center in your country. In case of trouble, check the following before calling for service: 1. Are the connections made properly ? 2.
HOW TO RESET THE UNIT Should the operation or display seem to be abnormal, reset the unit with the following procedure. Press POWER button x to set SR4200 in standby mode, then press and hold the F/P !4 until SR4200 is turned on. Remember that the procedure will reset the settings of the function selector, Surround mode, delay time, TUNER PRESET etc., to their initial settings.
MD PLAYERS SETUP CODES Denon ................................................................................ 1900 Kenwood ................................................................. 1708, 1853 Marantz ............................................................................. 1207 Onkyo ................................................................................ 1895 Optimus ............................................................................. 1090 Pioneer ............................
Majestic ............................................................................. 0043 Marantz ......................................................... 0057, 0081, 1581 Matsushita ......................................................................... 0277 Megatron ................................................................. 0172, 0205 Memorex ..... 0043, 0083, 0177, 0181, 0205, 0206, 0277, 0490 Midland .......................................................... 0044, 0074, 0078 Mitsubishi .....
NEC ......................................................................... 0094, 0131 Nikko ................................................................................. 0064 Noblex ............................................................................... 0267 Olympus ............................................................................ 0062 Optimus ...... 0064, 0075, 0085, 0131, 0189, 0459, 1075, 1089, 1189, 1289 Orion .............................................................
DVD Aiwa .................................................................................. 0668 Apex .................................................................................. 0699 Denon ...................................................................... 0517, 0661 Fisher ................................................................................ 0697 GE ..................................................................................... 0549 Harman/Kardon .................................
TECHNICAL SPECIFICATIONS FM TUNER SECTION Frequency Range ................................................................................................................................................. 87.5 - 108.0 MHz Usable Sensitivity ............................................................................................................................................. IHF 1.8 µV/16.4 dBf Signal to Noise Ratio ........................................................................................
COUNTRY ALGERIE ARMENIA AUSTRALIA AUSTRIA BAHREIN BANGLADESH BELGIUM BULGARIA CANADA CHINA CYPRUS CZECH REPUBLIC DENMARK DUBAI EGYPT ESTONIA F.Y.R.O.M. FINLAND FRANCE GERMANY GREECE HEADQUARTERS EUROPE: HONG KONG HUNGARY ICELAND INDIA IRAN IRELAND ISRAEL ITALY IVORY COAST JAPAN KOREA KUWAIT LATVIA LEBANON LITHUANIA MALAYSIA MALTA MAURITIUS MILITARY MARKET EUROPE NETHERLANDS NEW ZEALAND NORWAY OMAN POLAND PORTUGAL PROFESSIONAL EUROPE PROFESSIONAL U.S.A.
