Model SR4400 User Guide AV Surround Receiver SR4400U DFU_00_cover Page 7 03.4.10, 2:59 PM Adobe PageMaker 6.
IMPORTANT SAFETY INSTRUCTIONS CAUTION READ BEFORE OPERATING EQUIPMENT RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of el
INTRODUCTION .................................. 2 BASIC OPERATION (PLAY BACK) .. 21 CAUTIONS ON INSTALLATION .................................... 2 FL DISPLAY ................................................................... 4 SELECTING AN INPUT SOURCE. .............................. 21 SELECTING THE SURROUND MODE ....................... 21 ADJUSTING THE MAIN VOLUME .............................. 21 ADJUSTING THE TONE(BASS & TREBLE) CONTROL .. 21 TEMPORARILY TURNING OFF THE SOUND ............
ENGLISH INTRODUCTION Thank you for purchasing the Marantz SR4400 Surround receiver. This remarkable component has been engineered to provide you with many years of home theater enjoyment. Please take a few minutes to read this manual thoroughly before you connect and operate the SR4400. As there are a number of connection and configuration options, you are encouraged to discuss your own particular home theater setup with your Marantz A/V specialist dealer.
BUILT-IN 6 CHANNEL POWER AMPLIFIER WE R TV VC R R1 DSS/V CR2 CD TA TV L . VO D AU PE DV In a theater, center speaker is set behind the screen and it attenuates high frequency sound so high tone is recorded emphasized. This unit has HT-EQ (Home Theater Equalizer) function. It enables to play a movie in your home just like its creator wanted. X M R/ CD P D SLEE AM P M E D NU I OFF 2 4 /E DT EX ST S S 3 5 7 ST M DS P A/ 6.1CH 6 8 EO O ER EM D SS 9 0 IN P.
ENGLISH This feature (Sound Injection) combines a sound from one source with a picture from another. Choose the video source first, and then choose a different audio source to activate this function. Press TUNER button to switch the between FM or AM. FRONT PANEL !4 !3 q w !5 e t r !6 !7 y u i o VOLUME DOWN CLEAR MEMORY A/D TUNING/PRESET HT-EQ F/P S-DIRECT UP PHONES !2 q 6.
6.1 CHANNEL DIRECT IN indicator ¡4 ATT (Attenuation) indicator This indicator lights up when the 6.1CH-IN has been selected as a input source. This indicator lights when the attenuation function is active. h ¡5 AUTO.SURR (Auto Surround mode) indicator. This indicator illuminates to show that the AUTO SURROUND mode is in use.
ENGLISH n ⁄2 Subwoofer Output Connect this jack to the line level input of a powered subwoofer. If an external subwoofer amplifier is used, connect this jack to the subwoofer amplifier input. If you are using two subwoofers, either powered or with a 2 channel subwoofer amplifier, connect a “Y” connector to the subwoofer output jack and run one cable from it to each subwoofer amplifier.
Numeric buttons 1 to 9 (A, B, C ... Z, –) / Surround mode buttons Numeric buttons These buttons are used to enter figures in the selection of a tuner preset station and station name preset or to set select a CD track number, etc. The functions of these buttons are dependent on the function button selected. Surround mode buttons (when AMP mode is selected) These buttons are used to select the surround mode. Note: • The surround mode is set to 6-Stereo mode by pressing M-CH ST button. ⁄0 P.
ENGLISH SCANNING THE CODE TABLE RESETTING THE ALL CODE OSD MENU POWER TV CD AUX 2. TV VOL. SLEEP DSS/VCR2 TAPE 2. 3. 4. 5. 6. CDR/MD AMP MAIN VOL. MUTE OSD 1. DVD 2. 6. 3. SETUP/ T.TONE TV VCR1 DSS/VCR2 DVD TUNER CD TAPE CDR/MD DTS AUTO 1 2 3 NIGHT CSII EX/ES DSP 4 5 DISPLAY M-CH ST STEREO 7 8 9 CLEAR MEMO A/D P.SCAN SETUP/ T.TONE AUX TV VOL. 1. TUNE/SEARCH Switch on the appliance which should be controlled.
THE CONTRABLE FUNCTION TABLE To control the SR4400 by your RC5400SR, you have to select the device AMP or TUNER by function selector button. Please refer as below for the deatails in AMP and TUNER mode. POWER AMP MODE POWER TV VCR1 DSS/VCR2 DVD TUNER CD TAPE CDR/MD TV VOL. AUX AMP SLEEP MUTE OSD MAIN VOL. MENU OK SETUP/ T.TONE MENU OFF DTS S-DIRECT AUTO 1 2 3 NIGHT CSII EX/ES DSP 4 5 6 DISPLAY M-CH ST STEREO 7 8 9 CLEAR MEMO A/D P.SCAN 6.
ENGLISH CONNECTIONS SPEAKER PLACEMENT The ideal surround speaker system for this unit is 7-speaker systems, using front left and right speakers, a center speaker, surround left and right speakers, a surround back and a subwoofer. For best results we recommend that all front speakers be of the same type, with identical or similar driver units. This will deliver smooth pans across the front sound stage as the action moves from side to side.
1. 2. Strip away approx. 10 mm of wire insulation. Twist the bared wire ends tight to prevent short circuits. Loosen the knob by turning counterclockwise. Insert the bare part of the wire into the hole in the side of each terminal. Tighten the knob by turning clockwise to secure the wire. 3. 4. 5. 1. The output audio signal from the TAPE OUT jack and the CD-R/MD OUT jack is the sound source currently selected. CONNECTING AUDIO COMPONENTS TAPE DECK CD PLAYER CD RECORDER / MD DECK 2.
ENGLISH VIDEO, S-VIDEO JACKS CONNECTING VIDEO COMPONENTS There are two types of video jacks on the rear panel.
CONNECTING REMOTE CONTROL JACKS TV IN DVD IN DSS / VCR2 VCR1 OUT IN IN REMOTE CONTROL MONITOR OUT OUT DVD IN VCR1 IN DVD VCR1 OUT IN MONITOR OUT S-VIDEO VIDEO TV CD RECORDER ENGLISH ADVANCED CONNECTING DSS / VCR2 VCR1 CDR / MD TAPE SUB OUT CD CENTER WOOFER CENTER L L AM EXTERNAL INTERNAL R R R L R L GND R L DVD AUDIO PLAYER or SACD MULTI CHANNEL PLAYER TV DVD IN IN VCR1 IN DSS / VCR2 OUT IN OUT DVD IN OUT IN OUT IN OUT IN AUDIO DVD IN VCR1 IN V
ENGLISH ASSEMBLING THE AM LOOP ANTENNA CONNECTING THE ANTENNA TERMINALS 1. 2. 3. FM ANTENNA FM EXTERNAL ANTENNA AM EXTERNAL ANTENNA AM LOOP ANTENNA 4. Release the vinyl tie and take out the connection line. Bend in the reverse direction. Inserting into the hole to attach the loop antenna to the antenna stand. With the antenna on top any stable surface. 1. CONNECTING AN FM OUTDOOR ANTENNA Notes: • Keep the antenna away from noise sources (neon signs, busy roads, etc.).
Main Menu After all components are connected, initial setup must be performed. SPEAKERS ROOM 2.0 (2.0 ch) 6.1 (6.1ch) LARGE / MEDIUM / SMALL 6.1 (6.1ch) LARGE 1. INPUT setup CD TAPE CD-R (CD-R/MD) TV DSS (DSS/VCR2) DVD VCR1 D1 AUTO / D2 AUTO /D3AUTO / D4 AUTO (DigitalAUTO mode) DIG.1 / DIG.2 / DIG3.
ENGLISH The relation of the speakers number and conectted speaker MENU STRUCTURE of Simple Setup SIMPLE SETUP You can setup the speaker conditions quickly with SIMPLE SETUP menu. In this menu, the number of speakers and speaker delay time can be set. These settings can be changed more detail in “2. SPEAKER SETUP” menu. SIMPLE SETUP SPEAKERS 6.0 (ch) 5.1 (ch) POWER 5.0 (ch) TV VCR1 DSS/VCR2 DVD TUNER CD TAPE CDR/MD 4.1 (ch) 4.0 (ch) 4. 5. TV VOL. AUX AMP SLEEP MUTE OSD 2. 3. 4. 5. 3.
1. 2. 3. 4. 5. Select “2.SPEAKER” in SETUP MAIN MENU with or cursor button, Press the OK button to enter the menu. The first sub-menu item is “Speaker Size” setup. Press or cursor button to select the each speaker. Press or cursor button to select the setting of size to each speaker. If you finish these setup, press the or cursor button to select “NEXT”. 2.
ENGLISH L&R : Set the distance from the front left and right speakers to your normal listening position between 1 and 30 feet in 1.0 foot interval (0.3 to 9 meters in 0.3-meter intervals). C: Set the distance from the center speaker to your normal listening position between 1 and 30 feet in 1.0 foot interval (0.3 to 9 meters in 0.3-meter intervals). SLR: Set the distance from the surround left and right speaker to your normal listening position between 1 and 30 feet in 1.0 foot interval (0.
Note: • When Front speaker is set ”SMALL”, then BASS MIX is set “MIX”. (The display appears “BASS MIX = ✱✱✱”.) MENU STRUCTURE of Speaker Level setup Direct selec by remote control Speaker Distance setup Test Tone mode MANU LFE • Select the output level of the LFE signal included in the Dolby Digital signal or the DTS signal. Select 0dB, -10 dB or OFF with Left or Right cursor button. • This setting is available during a digital signal is playback.
ENGLISH Note: • When Center speaker is set ”None”, then C.WIDTH is set “7”. (The display appears “C.WIDTH = ✱✱✱”.) MENU STRUCTURE of PRO LOGIC II setup 4. PRO LOGIC II setup OFF PANORAMA ON 0 DIMENSION C.WIDTH 0 6 7 TRUBASS: Set the TRUBASS level between 0 and 6 level in 1 level interval with or cursor button. TRUBASS produced by the speakers to be an octave below the actual physical capabilities of the speakers adding exciting, deeper bass effects.
When you select “TO MAIN MENU” by pressing the or button, you can return the SETUP MAIN MENU by pressing the OK button. Note: • SURR.L/R, SURR. BACK, CENTER and SUB W volume level are synchronized with SETUP MAIN MENU Speaker Level. (Page 18) MENU STRUCTURE of SURROUND setup MODE / Speaker 7.SURROUND setup SURROUND MODE C(Center)LEV SL(Surround Left)LEV SR(Surround Right)LEV SB(Surround back)LEV BASIC OPERATION (PLAY BACK) E.G.
ENGLISH OFF 90 10 80 20 30 40 70 60 50 The sleep time will be shown for a few seconds in the display on the front panel, and it will count down until the time has elapsed. When the programmed sleep time has elapsed, the unit will automatically turn off. Note that the SLEEP indicator on the display will light up when the Sleep function is programmed. To cancel the Sleep function, press the SLEEP button until the display shows to “SLEEP OFF” and the SLEEP indicator disappear.
Circle Surround is designed to enable multichannel surround sound playback of non-encoded and multi-channel encoded material. Backward compatibility provides listeners with up to 6.1 channels of surround performance from entire collection of music and film, including broadcast, videotape and stereo recorded music. Regarding to source material, you can select CSIICinema mode, CSII-Music mode or CSII-Mono mode. Note: • PCM-audio (32 kHz, 44.
ENGLISH Surround Mode Input Signal Decoding AUTO Dolby Surr. EX Dolby D (5.1ch) Dolby D (2ch) Dolby D (2ch Surr) DTS-ES Dolby Digital EX Dolby Digital 5.1 Dolby Digital 2.0 Pro Logic II movie DTS-ES L/R O O O O O Output Channel SL C SR SB SW O O O O O O - O - O O O - O O O O O DTS (5.1ch) PCM (Audio) PCM 96kHz Analog Dolby D Surr. EX Dolby D (5.1ch) Dolby D (2ch) Dolby D (2ch Surr) DTS-ES DTS 5.1 PCM (Stereo) PCM (96kHz Stereo) Stereo Dolby Digital EX Dolby Digital 5.1 Dolby Digital 2.
DIMMER (DISPLAY) ATTENUATION TO ANALOG INPUT SIGNAL SETUP/ T.TONE VOLUME S-DIRECT TREBLE 2 CSII EX/ES 4 5 6 M-CH ST STEREO 6.1CH IN MODE 7 8 9 MEMO A/D P.SCAN UP TUNE/SEARCH ET DISP./RDS F/P F.DIRECT DISPLAY MODE DISPLAY DIMMER CLEAR MUTE DTS 1 NIGHT DOWN BASS MENU OFF AUTO 3 DSP 0 CDR/MD TAPE CD In Digital mode, input is fixed to an assigned digital input terminal. In analog mode, the analog input jacks are selected.
ENGLISH 2. SETUP/ T.TONE MENU OFF S-DIRECT AUTO 1 2 3 NIGHT CSII EX/ES DSP 4 5 6 DISPLAY M-CH ST STEREO 7 8 9 CLEAR MEMO A/D P.SCAN AV SURROUND RECEIVER SR4400 DTS SURROUND CLEAR A/D 2. MEMORY 6.1CH IN BASIC OPERATION (TUNER) MANUAL TUNING 3. (FM) TUNING MODE (AUTO STEREO OR MONO) 2. 1. VOL 0 CHANNEL/SKIP HT-EQ 1. LISTENING TO THE TUNER TV VCR1 DSS/VCR2 DVD TUNER CD TAPE CDR/MD VOLUME TV VOL. AUX AMP SLEEP MUTE MODE MAIN VOL.
3. 4. 5. (Using the remote control unit) 1. Tune into the radio station you desire (Refer to the “MANUAL TUNING” or “AUTO TUNING” section). 2. Press the MEMO button on the remote unite. “– –“ (preset number)starts blinking on the display. 3. Enter the desired preset number by pressping numeric buttons. Note: • When entering a single digit number (2 for example), either input “02” or just input “2” and wait for a few seconds. (Using the remote control unit) 1. Press the P.SCAN on remote.
ENGLISH 6. To move back and forth between the characters, press the TUNING / button or press 4 / ¢ buttons on the remote. Note: • Unused columns should be filled by entering blanks. To save name, press the MEMORY button, press MEMO button on the remote for more than 2 seconds. • You can input the alphabetic and numeric characters with the ten keypad of the remote control in the previous step 4 and 5. 7.
Can not select CSII mode. CAUSE Input signal is incompatible. REMEDY Use PCM input signal or analog input signal. No output to Sub Woofer Out. Sub-woofer = NONE has been selected Select Sub-woofer = YES. in SETUP mode. Noise is produced during DTS- Analog has been selected for input. encoded CD or laser disc play. Be sure to perform digital connection, select digital input, then play. A specific channel does not Nothing recorded on source. produce output. Check the encoded channel on the source side.
Television Format ........................................................ NTSC Input Level/Impedance .................................. 1 Vp-p/ 75 ohms Output Level/Impedance ............................... 1 Vp-p/ 75 ohms Video Frequency Response ............... 5 Hz to 8 MHz (– 1 dB) Signal to Noise Ratio ..................................................... 60 dB AUDIO SECTION Power Output (20Hz – 20kHz / THD=0.08%) Front L&R .................................................... 8ohms Center ...........
SETUP CODES CD Aiwa ............................................ 0151, 0184 Burmester .............................................. 0447 California Audio Labs .................. 0056, 0330 Carver ..................... 0184, 0206, 0326, 0464 DKK ....................................................... 0027 Denon .................................................... 0030 Emerson ............................................... 0332 Fisher .......................................... 0201, 0206 Garrard ...........
JVC ....................................................... 0080 KEC ....................................................... 0207 KTV ............................................. 0057, 0207 Kenwood ..................................... 0046, 0057 LG ......................................................... 0083 LXI ................. 0074, 0081, 0181, 0183, 0205 Logik ...................................................... 0043 Luxman ................................................. 0083 MGA ...............
Shogun .................................................. 0267 Singer .................................................... 0099 Sony ........................ 0027, 0059, 0062, 1059 Sylvania ................... 0027, 0062, 0070, 0108 Symphonic ............................................ 0027 TMK ....................................................... 0267 Teac ...................................................... 0027 Technics ...................................... 0062, 0189 Teknika ......................
www.marantz.com You can find your nearest authorized distributor or dealer on our website. JAPAN Marantz Japan, Inc. 35-1 Sagami Ohno 7-Chome, Sagamihara-shi, Kanagawa 228-8505, Japan U.S.A. Marantz America, Inc. 1100 Maplewood Drive, Itasca, IL 60143, U.S.A. EUROPE Marantz Europe B.V. P.O. Box 8744, 5605 LS Eindhoven, The Netherlands Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories.
