Model SR3001 User Guide AV Surround Receiver
IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
12. Grounding or Polarization – This product may be equipped with a polarized alternatingcurrent line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. 16.
FOREWORD ...........................................1 INTRODUCTION ....................................1 PRECAUTIONS ......................................1 DESCRIPTION .......................................2 FEATURES .............................................3 ACCESSORIES ......................................3 FRONT PANEL ......................................4 FL DISPLAY ........................................................................5 REAR PANEL .........................................
ENGLISH DESCRIPTION DTS was introduced in 1994 to provide 5.1 channels of discrete digital audio into home theater systems. DTS brings you premium quality discrete multichannel digital sound to both movies and music. DTS is a multichannel sound system designed to create full range digital sound reproduction. The no compromise DTS digital process sets the standard of quality for cinema sound by delivering an exact copy of the studio master recordings to neighborhood and home theaters.
DSS/V CD VO TV L. I CS 3 5 6 8 L UA RT VI EO ER ST D A/ 9 0 IN AN P.SC OFF /V- KIP E OFF S DT S /E EX NEL/S OD NU 2 4 CHAN LE T-M SC+ 7.1CH RD S SUB- F.D T/A TT IRE CT Y PT RE MO RC 5500 TE CO SR NTRO LLER H AUDIO SY STEM RC CH.SE L UT/DI ME 1 BA INP R TO H-ST MO SS NU AU PLAY ME TREB E T N SE T.T TUP/ ON E CT D MA VO IN L.
ENGLISH FRONT PANEL qw e r ty u i o !0 !1 !2 !3 AV SURROUND RECEIVER SR3001 INPUT SELECTOR VOLUME DISP SLEEP MULTI AUTO AUTO SURR TUNED DIRECT ST V – OFF DISC 6.1 NIGHT MTX 6.1 PEAK ATT ANALOG EQ DIGITAL SURROUND DIGITAL L Notes: • The surround mode is automatically switched to AUTO when the pure direct function is turned on. • Additionally, Speaker Configurations are fixed automatically as follows.
HEADPHONE jack for stereo headphones s This jack may be used to listen to the SR3001’s output through a pair of headphones. Be certain that the headphones have a standard 1 / 4" stereo phono plug. Note that the main room speakers will automatically be turned off when the headphone jack is in use. Notes: • When using headphones, the surround mode will change to STEREO and TruSurround (TS) headphones by SURROUND MODE button.
ENGLISH n REAR PANEL z x c v b n GND AM ANTENNA IN OUT VCR1 DVD TV Y IN OUT VCR1 SL C MONITOR L DVD SBL IN MONITOR CB/ PB IN CD OUT TAPE IN OUT CDR/MD IN OUT DSS / VCR2 IN OUT VCR1 R DVD SR SW 7.1CH INPUT TV SBR 1 R ⁄1 DIGITAL INPUT L FRONT SUBWOOFER OUT 2 R L R SURROUND BACK S.
z FUNCTION AND OPERATION x The provided remote control unit is a universal remote controller. The POWER button, numeric buttons and control buttons are used in common across different input source components. The input source controlled with the remote control unit changes when one of the input selector buttons is pressed. z x POWER TV VCR1 TUNER ¤5 ¤4 ¤3 CD TV VOL. DSS/VCR2 DVD TAPE CDR/MD AUX1 AMP SLEEP MUTE OSD MAIN VOL. MENU ⁄4 SET UP/ T.
ENGLISH ¤1 PURE DIRECT button When this button is pressed, the tone control circuit is bypassed. ¤2 SETUP / T.TONE button (when AMP mode is selected) Used to enter the test tone menu. ¤3 OSD button Note: This button is unavailable for SR3001. ¤4 SLEEP (sleep timer) button This button is used for setting the sleep timer. It can be operated the same way as the button on the unit.
REMOTE CONTROL The distance between the transmitter of the remote control and the IR SENSOR of the SR3001 should be less than 5 meters. If the remote control is pointed in a direction other than the IR SENSOR or if there is an obstacle between them, use of the remote control may not be possible. LOADING BATTERIES The life of the batteries used with the remote control is about 4 months with normal use. Also be sure to replace batteries earlier when you notice that they are getting weak. 1.
ENGLISH THE CONTRABLE FUNCTION TABLE TV VCR DVD DSS CD TAPE CDR MD POWER CALL UP MENU Cursor OK POWER CALL UP MENU Cursor OK POWER CALL UP MENU Cursor OK POWER SWITCH DISPLAY – – POWER SWITCH DISPLAY – – POWER SWITCH DISPLAY – – POWER SWITCH DISPLAY – – SETUP/T.
SPEAKER PLACEMENT The ideal surround speaker system for this unit is 7-speaker systems, using front left and right speakers, a center speaker, surround left and right speakers, surround back left and right speakers, and a subwoofer. For best results we recommend that all front speakers be of the same type, with identical or similar driver units. This will deliver smooth pans across the front sound stage as the action moves from side to side.
CONNECTING AUDIO COMPONENTS CD recorder / MD deck Tape Deck CD player OUT L DIGITAL OUTPUT OUT IN R DIGITAL OUTPUT L L R R OUT IN L L R R L R R L L R L R L R Analog Audio R L L R L R L R ENGLISH Caution: • Be sure to use speakers with the specified impedance as shown on the rear panel of this unit. • To prevent damage to circuitry, do not let the bare speaker wires touch each other and do not let them touch any metal part of this unit.
ENGLISH VIDEO, S-VIDEO , COMPONENT JACKS CONNECTING VIDEO COMPONENTS There are 3 types of video jacks on the rear panel. S-VIDEO IN S-VIDEO DIGITAL COMPONENT VIDEO OUT OUT OUT VIDEO AUDIO OUT OUT Satellite Tuner VIDEO PROJECTOR DVD player Y AUDIO OUT COMPONENT VIDEO IN Y C B / PB C R / PR VIDEO jack The video signal for the VIDEO jacks is the conventional composite video signal.
ENGLISH ADVANCED CONNECTING CONNECTING THE REMOTE CONTROL JACKS 2 VIDEO FM (75Ω) GND AM IN OUT DSS / VCR2 ANTENNA RC-5 S V IN OUT VCR1 DVD TV MONITOR L IN SL OUT VCR1 C DVD SBL RC OUT SVIDEO MONITOR MONITOR L TV IN SL Y OUT VCR1 C DVD SBL IN MONITOR OUT OPTION L CB/ PB R CR/ PR IN CD OUT TAPE IN OUT CDR/MD IN OUT DSS / VCR2 IN OUT VCR1 R DVD TV SR SW 7.1CH INPUT R SBR TV SR SW 7.1CH INPUT SBR 1 R L R L R DVD L SURROUND BACK S.
AM Loop Antenna FM External Antenna FM Antenna RC-5 GND AM IN OUT DSS / VCR2 ANTENNA AC IN SVIDEO VIDEO FM (75Ω) IN OUT VCR1 DVD TV MONITOR L Y IN OUT VCR1 SL C DVD SBL IN MONITOR OUT L CB/ PB R CR/ PR IN CD OUT TAPE IN OUT CDR/MD IN OUT DSS / VCR2 IN OUT VCR1 R DVD TV SR SW 7.1CH INPUT SBR 1 SUBWOOFER OUT DIGITAL INPUT L FRONT 2 R L SURROUND BACK S. SPEAKER B R MODEL NO.
ENGLISH MENU STRUCTURE SETUP SIMPLE SETUP After all components are connected, initial setup must be performed. SETUP MENU SYSTEM The SR3001 incorporates an menu on the front display, which makes various operations possible by using the cursor (3, 4, 1, 2) and ENTER buttons. 2. SPEAKER ENTER THE DESIRED MENU ITEM OF THE SETUP MENU 4. →2.0(2ch)→2.1(2.1ch)→ … →7.0(7ch)→7.1(7.1ch)→ →LARGE→MEDIUM→SMALL→ Initial state SETUP MENU 1. INPUT 3. 5.
MENU STRUCTURE of Simple Setup You can setup the speaker conditions quickly with SIMPLE SETUP menu. In this menu, the number of speakers and speaker delay time can be set. These settings can be changed more detail in “2. SPEAKER” setup menu. Press the SIMPLE SETUP button on the unit to enter this menu. SIMPLE SETUP 2.0 (ch) SPEAKERS 2.1 (ch) 3.0 (ch) 3.1 (ch) 1. 2. 4. 3. 5. 4.0 (ch) SURROUND RECEIVER SR3001 DISP SLEEP MULTI AUTO AUTO SURR TUNED DIRECT ST V – OFF DISC 6.1 NIGHT MTX 6.
ENGLISH 5. If you finish these setup, press the 3 or 4 cursor button to select “TO MAIN MENU” then press the ENTER button to return the SETUP MENU. 1. 3. 5. MENU STRUCTURE of Speakers Size setup 4. 5. 2. 5. Speakers Size SUBW YES D RECEIVER SR3001 Or press the 1 or 2 cursor button to select “EXIT” then press the ENTER button to exit the SETUP MENU. DISP MULTI SLEEP AUTO TUNED AUTO SURR ST DIRECT V – OFF DISC 6.1 NIGHT PEAK ATT MTX 6.1 ANALOG DIGITAL EQ 2-1.
Use this parameter to specify the distance of each speaker’s position from the listening position. The delay time is automatically calculated according to these distances. Begin by determining the ideal or most commonly used seating position in the room. This is important for the timing of the acoustics to create the proper sound space that the SR3001 and today’s sound systems are able to produce. Note that the speakers that you selected “None” for in the Speaker Config sub-menu will not appear here. 1. 3.
ENGLISH 2-3. SPEAKERS LEVEL SETTING WITH TEST TONE 1. Here you will set the volume for each speaker so that they are all heard by the listener at the same level. Moreover, if the T.TONE button is pressed, unit can enter into this menu directly. Note: The speaker level settings are not available in 7.1 Channel Input mode, CS mode and Multi Channel Stereo mode. 2. T(TEST) MODE : Selects “MANUAL” or “AUTO” for generating mode of test tone 1 or 2 cursor button. 1. 3. 5. 1. 5. 1. 2. 5. 5.
1. 4. 3. 4. 2. 4. Or press the 1 or 2 cursor button to select “EXIT” then press the ENTER button to exit the SETUP MENU. D RECEIVER SR3001 DISP MULTI SLEEP AUTO TUNED AUTO SURR ST DIRECT V – OFF DISC 6.1 NIGHT PEAK ATT MTX 6.1 ANALOG DIGITAL EQ When you select “TO MAIN MENU” by pressing the 3 or 4 button, you can return the SETUP MENU by pressing the ENTER button. SURROUND DIGITAL L R C LFE AAC PCM SL S 4.
ENGLISH 5. PL II (DOLBY PRO LOGIC II ) MUSIC PARAMETER Pro Logic II-Music mode creates a rich and enveloping surround ambience from stereo sources such as CDs. In this mode, SR3001 includes three controls to finetune the soundfield as follows. 1. 3. 5. 2. 5. 4. 5. D RECEIVER SR3001 DISP MULTI SLEEP AUTO TUNED AUTO SURR ST DIRECT V – OFF DISC 6.1 NIGHT PEAK ATT MTX 6.1 ANALOG DIGITAL EQ SURROUND L R C LFE SL S MENU STRUCTURE of CS II setup 6. CS II (CIRCLE SURROUND II) 1. 3. 5.
ADJUSTING THE TONE (BASS & TREBLE) CONTROL Example : AUTO SURROUND (PLAY BACK) PURE DIRECT AUTO 1 ENTER SELECTING AN INPUT SOURCE 3 EX/ES VIRTUAL NIGHT CSII 4 5 6 DISPLAY MCH-ST STEREO 7.1CH IN 7 8 9 MEMO A/D P.SCAN/V-OFF AV SURROUND RECEIVER SR3001 SLEEP Before you can listen to any input media, you must first select the input source on the SR3001. MULTI AUTO AUTO SURR SET UP/ T.TONE TUNED MENU OFF CLEAR DIRECT PURE DIRECT AUTO 1 SURROUND MODE 7.
ENGLISH SURROUND MODE The SR3001 is equipped with many surround modes. These are provided to reproduce a variety of surround sound effects, according to the content of the source to be played. The available surround modes may be restricted depending on the input signal and speaker setup. AUTO When this mode is selected, the receiver determines whether the digital input signal is Dolby Digital, Dolby Digital Surround EX, DTS, DTS-ES, DTS 96/24 or PCM-audio.
CAUTION This mode creates a virtualized surround sound experience from a two-speaker (front L and R) playback system playing any multichannel audio source (such as found on DVDs and digital broadcasts), including Dolby Digital, Dolby Pro Logic or DTS. NOTE for DTS signal * Connected DVD-player, laser-disc player or CDplayer needs to support DTS-digital output. You may not be able to play some DTS source signals from certain CD players and LD players even if you connect the player to the SR3001 digitally.
ENGLISH The relation between the selected surround mode and the input signal The surround mode is selected with the surround mode selector on SR3001 or the remote control unit. However, the sound you hear is subject to the relationship between the selected surround mode and input signal.
ATTENUATION TO ANALOG INPUT SIGNAL BASS TREBLE TUNE/SEARCH DISPLAY MODE This jack may be used to listen to the SR3001’s output through a pair of headphones. Be certain that the headphones have a standard 1/4" stereo phono plug. (Note that the speakers will automatically be turned off when the headphone jack is in use.) SELECTING ANALOG AUDIO INPUT OR DIGITAL AUDIO INPUT AV SURROUND RECEIVER SR3001 R SET UP/ T.TONE PURE DIRECT DISP SLEEP MULTI AUTO AUTO SURR TUNED DIRECT ST V – OFF DISC 6.
ENGLISH RECORDING AN ANALOG SOURCE In normal operation, the audio or video source selected for listening through the SR3001 is sent to the record outputs. This means that any program you are watching or listening to may be recorded simply by placing machines connected to the outputs for TAPE OUT, CD-R/MD OUT, VCR1 OUT, and DSS/VCR2 OUT in the record mode.
If it is necessary to adjust the output level of each channel, press the CH.SEL button on the remote. Adjust the speaker output levels so that you can hear the same sound level from each speaker at the listening position. For the front left, front right, center, surround left, surround right and surround back speakers, the output levels can be adjusted between –10 to +10 dB. MENU STRUCTURE of 7.1CH INPUT LEVEL setup 7.1 CH INPUT LEVEL This menu is to adjust the speaker levels for 7.1channel input sources.
ENGLISH BASIC OPERATION MANUAL TUNING (TUNER) 2. (FM) TUNING MODE (AUTO STEREO OR MONO) 1. 1. LISTENING TO THE TUNER SLEEP MULTI AUTO AUTO SURR TUNED DIRECT ST V – OFF DISC 6.1 NIGHT PEAK MTX 6.1 ATT EQ ANALOG L Frequency scan step for AM is selectable. Default setup is 10 kHz step, if your country’s standard is 9 kHz step, Press TUNER button on the remote more than 6 seconds. Scan step will change. Note: Preset memory for the tuner will clear by changing this setup.
1. PRESET SCAN SORTING PRESET STATIONS Tune into the radio station you desire (Refer to the “MANUAL TUNING” or “AUTO TUNING” section). 2. SET UP/ T.TONE 3. RECALLING A PRESET STATION 1. SET UP/ T.TONE PURE DIRECT 1. EIVER SR3001 DISP SLEEP MULTI AUTO AUTO SURR TUNED DIRECT ST V – OFF DISC 6.1 NIGHT MTX 6.1 PEAK ATT EQ ANALOG DIGITAL SURROUND DIGITAL L SL 2 3 NIGHT CSII EX/ES VIRTUAL 4 5 6 DISPLAY MCH-ST STEREO 7.1CH IN 7 8 9 MEMO A/D P.
ENGLISH SURROUND SPEAKER B SYSTEM The Surround Speaker B system is a function which allows you to listen to the same source in a room other than the room in which the SR3001 is located. The operations possible with the Surround speaker function are explained briefly below. ANOTHER ROOM PLAYBACK USING THE S(SURROUND) SPEAKER B TERMINALS The SR3001 allows you to connect another set of speakers and place them in a another room or separated area for listening to music.
In case of trouble, check the following before calling for service: 1. Are the connections made properly ? 2. Are you operating the unit properly following the user’s guide ? 3. Are the power amplifiers and speaker working properly ? If the unit does not operate properly, check items shown in the following table.
- after waiting at least three minutes, reconnect the plug to the AC line supply - re-attempt to operate the equipment Memory backup • In case a power outage occurs or the power cord is accidentally unplugged, the SR3001 is equipped with a backup function to prevent memory data such as the preset memory from being erased. FM TUNER SECTION Frequency Range .................................87.5 - 108.0 MHz Usable Sensitivity ............................IHF 1.8 µV/16.4 dBf Signal to Noise Ratio ...........
SETUP CODES CD Aiwa .................................................................................. 0184 Burmester ......................................................................... 0447 California Audio Labs........................................................ 0056 Carver ..................................................................... 0184, 0206 Classic .............................................................................. 0324 Denon ..............................................
Broksonic ................................................................ 0263, 0490 Candle .............................................................................. 0057 Carnivale .......................................................................... 0057 Carver ............................................................................... 0081 Celebrity ........................................................................... 0027 Celera .......................................................
MTC ........................................................................ 0267, 0027 Multitech ........................................................................... 0027 NAD .................................................................................. 0085 NEC ........................................................................ 0131, 0094 Nikko................................................................................. 0064 Noblex ......................................................
www.marantz.com You can find your nearest authorized distributor or dealer on our website. is a registered trademark.
