Owner's Manual
Table Of Contents
- Owner’s Manual
- Contents
- Accessories
- Part names and functions
- Connections
- Cables used for connections
- Connecting an amplifier
- Connecting to a device with digital audio input connectors
- Connecting to a device with digital audio output connectors
- Connecting a PC or Mac
- Connecting a USB memory device to the USB port
- Connecting to a home network (LAN)
- Connecting an external control device
- Connecting the power cord
- Playback
- Basic operation
- Listening to Internet Radio
- Playing back files stored on PC or NAS
- Playing a USB memory device
- Listening to music on a Bluetooth device
- Getting the HEOS App
- Playing CDs/Super Audio CDs
- Playing Data CDs and Data DVDs
- Using as a D/A converter
- AirPlay function
- Spotify Connect function
- Convenience functions
- Settings
- Tips
- Troubleshooting
- Power does not turn on / Power is turned off
- Operations cannot be performed through the remote control unit
- Display on this unit shows nothing
- No sound comes out
- Sound is interrupted or noise occurs
- Desired sound does not come out
- AirPlay cannot be played back
- USB memory devices cannot be played back
- Bluetooth cannot be played back
- The Internet radio cannot be played back
- Music files on PC or NAS cannot be played back (Music server)
- Various online services cannot be played
- Cannot connect to a wireless LAN network
- Cannot playback Discs
- There is a delay before the disc tray starts to open
- Music files on PC or Mac cannot be played back (USB-DAC)
- Audio from digital devices cannot be played back (Coaxial/Optical)
- Update/upgrade error messages
- Resetting network settings
- Appendix
- Playing back Discs
- Playback order of music files
- About discs and files
- Playing back a USB memory devices
- Cautions on using media
- D/A converter
- Playing back a Bluetooth device
- Playing back files stored on a PC and NAS
- Playing back Internet Radio
- Explanation of terms
- Trademark information
- Specifications
- Index
- License
0
Perform operations such as playback and pause on the computer. At this time, you
cannot perform operations with buttons on this unit or the remote control.
0
When this unit is functioning as a D/A converter, sound is not output from the
computer’s speakers.
0
If the computer is disconnected from this unit while the computer music playback
software is running, the playback software may freeze. Always exit the playback
software before disconnecting the computer.
0
When an error occurs on the computer, disconnect the USB cable and restart the
computer.
0
The sampling frequency of the music playback software and sampling frequency
displayed on this unit may differ.
0
Use a cable that is 10 ft (3 m) or less to connect to the computer.
Connect and playback from a digital
device (Coaxial/Optical 1/Optical 2)
1
Press COAXIAL or OPTICAL to switch the input source
to “Coaxial”, “Optical 1” or “Optical 2”.
0
Pressing OPTICAL changes the input source to “Optical 1” or
“Optical 2”.
0
If the sampling frequency cannot be detected, “Signal Unlock” will
be displayed.
0
“Unsupported” is displayed when audio signals that are not
supported by this unit are input.
o
Specifications of supported audio formats
See “D/A converter” (v p. 134).
NOTE
0
Do not input non-PCM signals, such as Dolby Digital and DTS. This causes noise
and could damage the speakers.
Contents Connections Playback Settings Tips Appendix
71
Front panel Rear panel
Remote control
unit
Index