Owner's Manual
Table Of Contents
- Owner’s Manual
- Contents
- Accessories
- Part names and functions
- Connections
- Cables used for connections
- Connecting an amplifier
- Connecting to a device with digital audio input connectors
- Connecting to a device with digital audio output connectors
- Connecting a PC or Mac
- Connecting a USB memory device to the USB port
- Connecting to a home network (LAN)
- Connecting an external control device
- Connecting the power cord
- Playback
- Basic operation
- Listening to Internet Radio
- Playing back files stored on PC or NAS
- Playing a USB memory device
- Listening to music on a Bluetooth device
- Getting the HEOS App
- Playing CDs/Super Audio CDs
- Playing Data CDs and Data DVDs
- Using as a D/A converter
- AirPlay function
- Spotify Connect function
- Convenience functions
- Settings
- Tips
- Troubleshooting
- Power does not turn on / Power is turned off
- Operations cannot be performed through the remote control unit
- Display on this unit shows nothing
- No sound comes out
- Sound is interrupted or noise occurs
- Desired sound does not come out
- AirPlay cannot be played back
- USB memory devices cannot be played back
- Bluetooth cannot be played back
- The Internet radio cannot be played back
- Music files on PC or NAS cannot be played back (Music server)
- Various online services cannot be played
- Cannot connect to a wireless LAN network
- Cannot playback Discs
- There is a delay before the disc tray starts to open
- Music files on PC or Mac cannot be played back (USB-DAC)
- Audio from digital devices cannot be played back (Coaxial/Optical)
- Update/upgrade error messages
- Resetting network settings
- Appendix
- Playing back Discs
- Playback order of music files
- About discs and files
- Playing back a USB memory devices
- Cautions on using media
- D/A converter
- Playing back a Bluetooth device
- Playing back files stored on a PC and NAS
- Playing back Internet Radio
- Explanation of terms
- Trademark information
- Specifications
- Index
- License
G
Select the “SACD 30n” format.
0
It is normally recommended to set the format to “384000.0 Hz” and
“2ch-32 bit Interger”.
.
⑦
SACD 30n
SACD 30n
H
Quit Audio MIDI Setup.
o
Playback
Install the desired player software on your computer beforehand.
Use the rear panel USB-DAC port to connect this unit to a computer.
(v p. 21)
1
Press USB-DAC to switch the input source to “USB-
DAC”.
Start playback on the computer’s player software.
0
If the sampling frequency cannot be detected, “Signal Unlock” will
be displayed.
0
“Unsupported” is displayed when audio signals that are not
supported by this unit are input.
o
Specifications of supported audio formats
See “D/A converter” (v p. 134).
Contents
Connections Playback Settings Tips Appendix
70
Front panel Rear panel
Remote control
unit
Index