Owner's Manual
Table Of Contents
- Owner’s Manual
- Contents
- Accessories
- Part names and functions
- Connections
- Cables used for connections
- Connecting an amplifier
- Connecting to a device with digital audio input connectors
- Connecting to a device with digital audio output connectors
- Connecting a PC or Mac
- Connecting a USB memory device to the USB port
- Connecting to a home network (LAN)
- Connecting an external control device
- Connecting the power cord
- Playback
- Basic operation
- Listening to Internet Radio
- Playing back files stored on PC or NAS
- Playing a USB memory device
- Listening to music on a Bluetooth device
- Getting the HEOS App
- Playing CDs/Super Audio CDs
- Playing Data CDs and Data DVDs
- Using as a D/A converter
- AirPlay function
- Spotify Connect function
- Convenience functions
- Settings
- Tips
- Troubleshooting
- Power does not turn on / Power is turned off
- Operations cannot be performed through the remote control unit
- Display on this unit shows nothing
- No sound comes out
- Sound is interrupted or noise occurs
- Desired sound does not come out
- AirPlay cannot be played back
- USB memory devices cannot be played back
- Bluetooth cannot be played back
- The Internet radio cannot be played back
- Music files on PC or NAS cannot be played back (Music server)
- Various online services cannot be played
- Cannot connect to a wireless LAN network
- Cannot playback Discs
- There is a delay before the disc tray starts to open
- Music files on PC or Mac cannot be played back (USB-DAC)
- Audio from digital devices cannot be played back (Coaxial/Optical)
- Update/upgrade error messages
- Resetting network settings
- Appendix
- Playing back Discs
- Playback order of music files
- About discs and files
- Playing back a USB memory devices
- Cautions on using media
- D/A converter
- Playing back a Bluetooth device
- Playing back files stored on a PC and NAS
- Playing back Internet Radio
- Explanation of terms
- Trademark information
- Specifications
- Index
- License
Switching the function of the volume buttons on the remote control
.
1
2
VOLUME
ENTER
If connecting a power amplifier to the analog audio output terminals
(VARIABLE) of this unit, you can change the operation mode of the
included remote control so that the volume of the power amplifier can be
adjusted from this unit. There are two remote control operation modes:
amplifier operation mode and network SACD player operation mode.
Amplifier operation mode adjusts the volume of a Marantz amplifier and
network SACD player operation mode adjusts the volume of the audio
signal output from the analog audio output terminals (VARIABLE) of this
unit. The factory default setting for the remote control operation mode is
the amplifier operation mode.
0
Be sure to check the operation of each unit after setting the remote control
operation modes.
0
Switch between the remote control operation mode settings by pressing the
VOLUME no and : buttons.
Contents
Connections Playback Settings Tips Appendix
102
Front panel Rear panel
Remote control
unit
Index