Contents Connections Playback Settings Tips Appendix Super Audio CD Player SA8005 You can print more than one page of a PDF onto a single sheet of paper.
Contents Connections Playback Settings Tips Appendix Contents Connecting the timer device······················································· 25 Connecting the power cord························································· 26 Accessories························································································· 4 Inserting the batteries······································································· 5 Operating range of the remote control unit····························
Contents Connections Playback Settings Settings Appendix Tips Menu map························································································· 52 Contents···························································································· 58 Menu operation··············································································· 53 Timer Play························································································· 54 Disp Info···························
Contents Connections Playback Settings Appendix Tips Thank you for purchasing this Marantz product. To ensure proper operation, please read this owner’s manual carefully before using the product. After reading them, be sure to keep them for future reference. Accessories Check that the following parts are supplied with the product.
Contents Connections Playback Settings Inserting the batteries Operating range of the remote control unit q Remove the rear lid in the direction of the arrow and remove it. w Load the two batteries properly as indicated by the q and w marks in the battery compartment. Point the remote control unit at the remote sensor when operating it. Approx. 23 ft/7 m R03/AAA batteries 30° e Put the rear cover back on.
Contents Connections Playback Settings Tips Appendix Features High quality sound High performance • Toroidal transformer This unit features a toroidal transformer that produces less vibration and magnetic leakage flux compared to conventional power transformers. The materials and manufacturing process of the ring-shaped core are strictly controlled to reduce vibration, while the short-ring attached to the perimeter of the transformer reduce magnetic leakage flux.
Contents Connections Playback Settings Tips • Supports MP3 and WMA file playback (vpage 34) MP3 and WMA files that have been recorded onto CD-R or CD-RW discs can be played back on this CD player. • Peripheral circuitry off function minimizes audio output signal interference In order to minimize noise from peripheral circuitry which could interfere with the analog audio signal, this unit is equipped with a peripheral circuitry off function which turns off the digital output circuit and the display.
Contents Connections Playback Settings Tips Appendix Part names and functions Front panel Q7 Q6 Q5 q w e Q4 Q3 Q2 Q1 Q0 rty u q Power operation button (X) Used to connect USB storages (such as USB memory devices) and the USB cable supplied with iPod (vpage 22).
Contents Q7 Q6 Q5 Connections Q4 Q3 Playback Settings Tips Appendix Q0 Pause button (3) Q2 Q1 Q0 Pauses playback (vpage 32, 35, 39, 42). Q1 Stop button (2) Stop playback (vpage 32, 35, 39, 42). Q2 Play button (1) Starts playback (vpage 32, 35, 39, 42). y Q3 Display ui o This displays various pieces of information (vpage 10). Q4 Disc tray y Multi layer indicator (MULTI) Used to insert a disc (vpage 71).
Contents Connections Playback Settings Appendix Tips Display i u y q r e w q Playback mode indicators t USB indicator 1 : Lights up during playback. 3 : Lights up during pause. This indicator lights up during operation in the USB mode. y Disc indicator w Information display This indicator displays the disc type which is currently in the disc tray. “M FILE” lights up if the disc contains WMA/MP3 files.
Contents Connections Playback Settings Appendix Tips Rear panel y t q w q AUDIO OUT connectors Used to connect the power cord (vpage 26). t DIGITAL AUDIO IN connectors w REMOTE CONTROL IN/OUT connectors Used to connect devices equipped with digital audio output connectors and PC (vpage 20, 21). Used to connect to a Marantz amplifier that is compatible with the remote control function (vpage 24).
Contents Connections Playback Settings Tips Appendix Remote control unit CD player operations To operate CD player, press REMOTE MODE CD button to switch the remote control to the CD operation mode. • REMOTE MODE CD button lights for approximately two seconds. q w q POWER button (X) Turns power to this unit on and off (standby) (vpage 28, 56). e r w Remote mode select button (REMOTE MODE CD) t e Reverse-skip / Forward-skip buttons (8, 9) This switches the remote control operating mode to CD.
Contents Connections Playback Settings Tips Appendix u TIME button This switches the playback time display (vpage 32, 35, 39, 42). i Cursor buttons (uio p) These select items (vpage 53). o Program button (PROG) This sets program playback (vpage 33). Q0 Number buttons (0 – 9, +10) These enter numbers into the unit (vpage 32, 33). Q3 Q1 DIMMER button Q4 Q5 Adjust the display brightness of this unit (vpage 29). Q2 RANDOM button ( ) Switches the random playback (vpage 32, 35, 39, 42).
Contents Connections Playback Settings Tips Appendix Q6 VOLUME buttons (df) Adjusts the analog audio output level (vpage 55, 57). Q7 MODE button This switches the playback mode (vpage 34, 37, 42). Q8 ENTER button This determines the selection (vpage 36, 37, 42, 53). Q9 SETUP button This displays the setting menu on the display (vpage 53). W0 CLEAR button This clears the program registration (vpage 33). W1 REPEAT button ( ) Switches the repeat playback (vpage 32, 35, 39, 42).
Contents Connections Playback Settings Tips Appendix Amplifier operations The included remote control unit can be used to operate Marantz amplifiers.
Contents Connections Playback Settings Appendix Tips Network audio player operations To operate network audio player, press REMOTE MODE NET button to switch the remote control to the NETWORK operation mode. • REMOTE MODE NET button lights for approximately two seconds.
Contents Connections Playback Settings Tips Appendix Connections 22Cables used for connections Connecting an amplifier (vpage 18) Provide necessary cables according to the devices you want to connect.
Contents Connections Playback Settings Tips Connecting an amplifier Use this connection for audio playback via an amplifier.
Contents Connections Playback Settings Tips Appendix Connecting a device equipped with digital audio input connectors Use this connection to output digital audio signals from this unit, and convert the signals for playback using the D/A converter of a connected device. AV receiver / D/A converter OPTICAL IN COAXIAL IN NOTE • Signals that can be output using digital output are digital audio signals from the CD layer of the Super Audio CD, CD, USB (front), USB-DAC, COAXIAL, and OPTICAL.
Contents Connections Playback Settings Tips Appendix Connecting a device equipped with digital audio output connectors Use this connection to input digital audio signals to this unit, and convert the signals for playback using the D/A converter of this unit (vpage 44 “Using as a D/A converter”). CD player / Satellite receiver etc.
Contents Connections Playback Settings Tips Appendix Connecting a PC or Mac By connecting a computer to the USB-DAC port on the rear panel of this unit using a commercially available USB connecting cable, this unit can be used as a D/A converter (vpage 44 “Using as a D/A converter”). Type A USB 2.
Contents Connections Playback Settings Tips Appendix Connecting an iPod or USB memory device to the USB port To connect an iPod/iPhone to this unit, use the USB adapter cable that was supplied with the iPod/iPhone. For operating instructions see “Playing an iPod” (vpage 37) or “Playing a USB memory device” (vpage 41). iPod USB memory device or % • Marantz does not guarantee that all USB memory devices will operate or receive power.
Contents Connections Playback Settings Tips 22Supported iPod ∕ iPhone models • iPod classic • iPod nano • iPod touch • iPhone Front panel Display Rear panel 23 Remote Index Appendix
Contents Connections Playback Settings Tips Appendix Remote control connection When you use this unit connected to a Marantz amplifier, this unit receives operation signals sent from the amplifier and operates accordingly. This unit Connection Use the supplied remote connector cable to connect the REMOTE CONTROL IN connector of this unit to REMOTE CONTROL OUT connector of the amplifier. Setting Turn the EXTERNAL/INTERNAL switch on the unit to “EXTERNAL”.
Contents Connections Playback Settings Tips Connecting the timer device By connecting this unit to an amplifier and timer device, you can use timer playback (vpage 54 “Timer Play”).
Contents Connections Playback Settings Tips Connecting the power cord After completing all the connections, insert the power plug into the power outlet.
Contents Connections Playback Settings Tips Appendix Playback Turning the power on (vpage 28) Playing DATA CDs (vpage 34) Select the playback media mode (vpage 29) Playing an iPod (vpage 37) Switching the display’s brightness (vpage 29) Playing a USB memory device (vpage 41) Stopping digital outputs (vpage 29) Using as a D/A converter (vpage 44) Setting the top priority playback layer for Super Audio CDs (vpage 30) Connecting and playing back from a computer (USB-DAC) (vpage 45) Playing CDs/
Contents Connections Playback Settings Tips Appendix Basic operation Turning the power on POWER X 1 The power indicator turns off. % SOUND MODE INPUT Press POWER X to turn on power to the unit. • You can also press X on the main unit to turn the power on. 22Switching the power to standby 1 ui Press POWER X. The unit switches to standby mode, and the Power indicator lights red.
Contents Connections Playback Settings Select the playback media mode 1 Appendix Stopping digital outputs Press INPUT to select the playback media mode. Stopping digital audio output reduces a source of noise that affects sound quality, enabling higher sound quality playback. Disc : S elect to playback a disc. 1 2 3 USB : Select to playback an iPod or USB memory device. USB-DAC / Coaxial / Optical : Select to use this unit as a D/A converter.
Contents Connections Playback Settings Setting the top priority playback layer for Super Audio CDs Press INPUT to select the playback media mode to “Disc”. 2 Check that no disc is loaded. 3 Press SOUND MODE and switch to the layer you want to set. % • If the layer is switched while the disc is being loaded, the playback layer switches for that disc, but the top priority playback layer setting itself does not change.
Contents Connections Playback Settings Tips Appendix Playing CDs/Super Audio CDs Playing CDs and Super Audio CDs 89 SOUND MODE 3 1 2 INFO TIME 1 Insert a disc (vpage 71). 2 When playing back a Super Audio CD, press SOUND MODE to set the playback layer (vpage 30). 3 Press 1. • Press 5 on the unit to open/close the disc tray. The 1 indicator lights on the display. Playback starts.
Contents Operation buttons 1 3 2 8 9 0 – 9, +10 RANDOM REPEAT TIME INFO Connections Playback Settings Tips 22Discs that can be played back Function Playback Pause Stop Skip to previous track / Skip to next track (Press and hold) Fast-reverse / Fast-forward Select the track Random playback • Can be set during stop. Repeat playback • Switching between Single-track repeat and All-track repeat.
Contents Connections Playback Settings Tips Appendix 22Checking the order of the programmed tracks Playing tracks in a specific order (Program playback) In the stop mode, press 9. The track numbers are displayed in the programmed order each time the button is pressed. Up to 20 tracks can be programmed. 1 In the stop mode, press PROG. 22To clear the last track programmed 2 Use 0 – 9 and +10 to select the tracks you want to program.
Contents Connections Playback Settings Tips Appendix Playing DATA CDs • This section explains how to playback MP3 and WMA files that are recorded onto a CD-R or CD-RW. • There are many music distribution sites on the Internet allowing you to download music files in MP3 or WMA (Windows Media® Audio) format. The music (files) downloaded from such sites can be stored on CD-R or CD-RW discs and played on this unit.
Contents Connections Playback Settings Playing files 1 Operation buttons 1 3 2 Load a CD-R or CD-RW disc containing music files in the MP3 or WMA formats into the disc tray (vpage 71). • Press 5 on the unit to open/close the disc tray. 2 8 9 Press MODE to select “Folder” or “All Files”. nn About the display ui op • When “Folder” is selected All the files in the selected folder are played.
Contents Connections Playback Settings Tips Appendix 22Files that can be played back % See “DATA CD” (vpage 67). • The folder and file numbers are set automatically when the disc is loaded. 22To switch the folder or file during playback NOTE • Folder Use ui to select the folder. • File Use o p to select the file. Also use 8, 9 to select the file. • The file numbers are set automatically when the disc is loaded. • Programmed playback is not possible with MP3/WMA discs.
Contents Connections Playback Settings Tips Appendix Playing an iPod • You can use the USB cable provided with the iPod to connect the iPod with the unit’s USB port and enjoy music stored on the iPod. • For information on the iPod models that can be played back with this unit, see “Supported iPod ∕ iPhone models” (vpage 23).
Contents Connections Playback Settings Tips Listening to music on an iPod 1 Press INPUT to select the playback media mode to “USB” (vpage 29). 2 Connect the iPod to the USB port (vpage 22). 3 Operate iPod itself directly while seeing the iPod screen to play back music. “Direct iPod” is displayed on the display of this unit. % • The iPod display modes include “Direct iPod” and “Remote iPod”.
Contents Connections Playback Settings Setting operation mode (Remote iPod mode) Operation buttons 1 3 2 In this mode, various lists and screens during playback on the iPod are displayed on the body. This section describes the steps up to playing back tracks on the iPod in“Remote iPod”.
Contents Connections Playback Settings Tips NOTE • Marantz will accept no responsibility whatsoever for any loss of iPod data. • Depending on the type of iPod and the software version, some functions may not operate. 22Switching the display During playback, press INFO. • Switching between the title name, artist name and album name.
Contents Connections Playback Settings Tips Appendix Playing a USB memory device • Playing back music files stored on a USB memory device. • Only USB memory devices conforming to mass storage class can be played on this unit. • This unit is compatible with USB memory devices in “FAT16” or “FAT32” format. • This unit can play back the following files.
Contents Connections Playback Settings Playing files stored on USB memory device 1 Press INPUT to select the playback media mode to “USB” (vpage 29). 2 Connect the USB memory device to the USB port (vpage 22). 3 Press MODE to select the “Folder” or “All Files”. nn About the display Operation buttons 1 3 2 8 9 RANDOM 4 Use ui to select the folder, then press ENTER. 5 Use ui to select the file, then press ENTER. MODE TIME Playback starts.
Contents Connections Playback Settings Tips Appendix 22Files that can be played back % See “USB memory device” (vpage 67). • When “USB Resume” (vpage 55) is set to “On” in the menu, this unit performs the following operations. • When the media mode is set to “USB” and a USB memory device is connected to this unit, playback starts automatically. • When the media mode is switched to “USB” while a USB memory device is connected to this unit, playback starts automatically.
Contents Connections Playback Settings Tips Appendix Using as a D/A converter Digital audio signals input from an external device or computer into this unit can be converted and output as analog signals using this unit (D/A converter). • DSD is a registered trademark. • Microsoft, Windows XP, Windows Vista, Windows 7 and Windows 8 are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
Contents Connections Playback Settings Tips 22Installing the dedicated driver (Windows OS only) Connecting and playing back from a computer (USB-DAC) nn Installing the driver software 1 • You can enjoy high-quality audio playback from the D/A converter built in to this unit by inputting PCM signal or DSD signal music files into this unit from a computer via USB connection.
Contents 4 Connections Playback Settings Install the driver. r Read the Software Licensing Agreement, and click “I accept the terms in the license agreement”. t Click “Next”. q Select the language to use for the installation. w Click “OK”. q SOFTWARE LICENSING AGREEMENT Marantz w e The wizard menu is displayed. Click “Next”.
Contents Connections Playback Settings y Click “Install” on the installation start dialog. • The installtion starts. Do not perform any operation on the computer until the installation is completed. Appendix Tips o When the installation is completed, click “Finish”. o y 5 u In the Windows security dialog, select “Always trust software from DandM Holdings Inc.”. i Click “Install”. u Front panel • For the connection procedure, refer to the “Connecting a PC or Mac” (vpage 21) section.
Contents 8 Connections Playback Settings 9 Checking the installed driver q Click the “Start” button and click “Control Panel” on the computer. • The control panel setting list is displayed. Appendix Tips Checking audio output Outputs a TEST signal from the computer and checks the audio output from the USB-DAC function. q Select “Digital Audio Interface” and click “Properties”. • The Digital Audio Interface Properties window is displayed. w Click the “Sound” icon.
Contents Connections Playback Settings Tips NOTE w Click the “Advanced” tab. e Select the sampling rate and bit rate to be applied to the D/A converter. • It is recommended that “24 bit, 192000 Hz (Studio Quality)” is selected. r Click “Apply”. t Click “Test”. • Check that audio from this unit is output from the computer. • The dedicated driver must be installed in the computer before this unit is connected to a computer.
Contents Connections Playback Settings 22Playback See “D/A converter” (vpage 70). NOTE • Perform operations such as playback and pause on the computer. At this time, you cannot perform operations with buttons on this unit or the remote control. • You can also control the volume and equalizer on the computer. Enjoy playing music at the desired volume. • When this unit is functioning as a D/A converter, sound is not output from the computer’s speakers.
Contents Connections Playback Settings Tips Connect and playback from a digital device (Coaxial/Optical) 1 Connect digital device to this unit (vpage 20). 2 Press INPUT to select the playback media mode to “Coaxial” or “Optical”. The input digital audio signal is displayed as shown. “Coax: xxxxk” or “Opt : xxxxk” (xxxx is the sampling frequency.) • If the sampling frequency cannot be detected, “Unlock” will be displayed. 22Files that can be played back See “D/A converter” (vpage 70).
Contents Connections Playback Settings Tips Appendix Settings Menu map By default, this unit has recommended settings defined. You can customize this unit based on your existing system and your preferences. Setting items Timer Play Disp Info iPod USB USB Resume Digital Out Audio Out Vol.Limit Auto Stnby Front panel Description Page This unit can perform timer play by cooperating with your timer device. Sets the information played during iPod and USB memory device playback.
Contents Connections Playback Settings Tips Appendix Menu operation INFO 1 Press SETUP during stop mode. 2 Use ui to select the menu to be set or operated, then press ENTER. 3 4 Use ui change to desired setting. The menu is displayed on the display. Press ENTER to enter the setting. • To return to the previous item, press o. • Exiting the Menu, press SETUP while the menu is displayed. The display returns to the normal display.
Contents Connections Playback Settings Tips Appendix Timer Play Disp Info This unit can perform timer play by cooperating with your audio timer (vpage 25 “Connecting the timer device”). On : Timer play is set. Off (Default) : T imer play is not set. Sets the information displayed during iPod or USB memory device playback. iPod Sets the information displayed during iPod playback. Time (Default) : Displays the time information. Title : Displays the title name.
Contents Connections Playback Settings Tips Appendix USB Resume Audio Out This unit stores the point at which playback of a file was stopped previously, and starts playback from the same point the next time playback is started. On (Default) : Resume playback is set. Remote : R esume playback is not set. You can set whether to fix (Fixed) or vary (Variable) the analog audio output level. Fixed (Default) : Fixes the analog audio output level (0 dB).
Contents Connections Playback Settings Tips Vol.Limit This sets the maximum analog audio output level that can be used when the analog audio output setting is set to variable. 0 dB : Set the maximum analog audio output level to 0 dB. –10 dB (Default) : S et the maximum analog audio output level to –10 dB. –20 dB : Set the maximum analog audio output level to –20 dB. % • This can be set when the “Audio Out” (vpage 55) setting is set to “Variable”.
Contents Connections Playback Settings Tips Appendix Switching the function of the volume buttons on the remote control When the function of the VOLUME df buttons on the remote control is set to “Variable”, the analog audio output level can be adjusted. AMP (Default) : A djusts the volume of Marantz amplifiers. Variable : Adjusts the analog audio output level of the analog audio signal output from this unit.
Contents Connections Playback Settings Tips Appendix Tips Contents 22Tips.....................................................................(59) 22Troubleshooting...............................................(60) I want to enjoy analog output audio at higher quality........................(59) Power does not turn on / Power is turned off...................................(60) I want to playback just the specified folder.......................................
Contents Connections Playback Settings Tips Tips I want to enjoy analog output audio at higher quality • Set “Digital Out” on the menu to “Off” (vpage 55). • Press the DIMMER button to turn the display off (vpage 29). I want to playback just the specified folder • Press the MODE button to set the playback range to “Folder mode” (vpage 35, 42). I want to stop the USB memory device from automatically starting playback • Set “USB Resume” to “Off” in the menu (vpage 55).
Contents Connections Playback Settings Tips Appendix Troubleshooting If a problem should arise, first check the following: 1. Are the connections correct? 2. Is the set being operated as described in the owner’s manual? 3. Are the other devices operating properly? If this unit does not operate properly, check the items listed in the table below. Should the problem persist, there may be a malfunction. In this case, disconnect the power immediately and contact your store of purchase.
Contents Connections Playback Settings Tips Appendix 22Operations cannot be performed through the remote control unit Symptom Operations cannot be performed through the remote control unit. Cause / Solution Page • Batteries are worn out. Replace with new batteries. • Operate the remote control unit within a distance of about 23 ft/7 m from this unit and at an angle of within 30°. • Remove any obstacle between this unit and the remote control unit.
Contents Connections Playback Settings Tips Appendix 22No sound comes out Symptom Cause / Solution No sound is produced or sound is distorted. Page • Check the connections for all devices. • Insert connection cables all the way in. • Check that input connectors and output connectors are not reversely connected. • Check cables for damage. • Check the amplifier’s functions and controls and adjust as necessary. • Check the Audio Out settings and adjust to the appropriate level.
Contents Connections Playback Settings Tips Appendix 22Cannot playback CDs Symptom Cause / Solution Page Cannot playback when the 1 button is pressed, or cannot correctly play back a specific part of the disc. • The CD is dirty or scratched. Either clean the CD, or insert a different CD. Cannot playback CD-R/CD-RW. • CDs cannot be played back unless they have been finalized. Use a finalized disc. • This may be caused by poor recording conditions, or the disc itself may be of poor quality.
Contents Connections Playback Settings Tips Appendix 22USB memory devices cannot be played back Symptom Cause/Solution Page • This unit may not recognize the USB memory device due to poor connection, etc. Make sure that the connection is made properly by taking actions such as disconnecting and reconnecting the USB memory device. • USB memory devices of a mass storage class are supported. • This unit does not support a connection through a USB hub.
Contents Connections Playback Settings Tips Appendix 22File names on the iPod/USB memory device are not displayed properly Symptom The file names are not displayed properly (“zzz”, etc.). Cause/Solution Page • Characters that cannot be displayed are used. This is not a malfunction. On this unit, characters that cannot be displayed are replaced with a “z”. – 22PC or Mac files cannot be played back Symptom Cause/Solution The PC or Mac cannot recognize this unit.
Contents Connections Playback Settings Appendix Tips Appendix Playable media Super Audio CD There are three types of Super Audio CDs: q Single layer discs Single layer Super Audio CD with just an HD layer. w Dual layer discs Super Audio CD with a double HD layer, offering extended playing time and high sound quality. e Hybrid discs Two-layer Super Audio CD with an HD layer and a CD layer. The signals on the CD layer can be played on a regular CD player.
Contents Connections Playback Settings DATA CD Appendix NOTE • Be sure to give files the extension “.mp3” or “.wma” Files with any other extensions or files with no extensions cannot be played. • Recordings you have made should only be used for your personal enjoyment, and as per copyright laws may not be used in other ways without permission of the copyright holder. CD-R and CD-RW discs created in the format described below can be played.
Contents Connections Playback Settings 22Playable files Tips % Playable files (Extension) • Only music files that are not copyright-protected can be played on this set. • Contents downloaded from pay sites on the Internet are copyright protected. Also, files encoded in WMA format when ripped from a CD, etc., on a computer may be copyright protected, depending on the computer’s settings.
Contents Connections Playback Settings Playback order of MP3/WMA/AAC/WAV files Appendix Tips About Discs and Files Files, such as MP3/WMA/AAC/WAV etc., recorded on CD-R/-RW and USB memory device are divided into large segments (folders) and small segments (files). Files are stored in folders, and folders can be placed for storage in a hierarchy. The unit can recognize up to 8 levels of folders.
Contents Connections Playback Settings Tips D/A converter 22Supported audio formats USB-DAC Signal format Specification DSD (2-channel) • Sampling frequency : 2.8224/5.6448 MHz • Bit length : 1 bit Linear PCM (2-channel) • Sampling frequency : 32/44.1/48/88.2/96/176.4/192 kHz • Bit length : 16/24 bit NOTE • Digital audio output is stopped during DSD signal or linear PCM signals with sampling frequencies of 32 kHz playback.
Contents Connections Playback Settings Cautions on using media Appendix NOTE • Only load one disc at a time. Loading two or more discs can damage the unit or scratch the discs. • Do not use cracked or warped discs or discs that have been repaired with adhesive, etc. • Do not use discs on which the sticky part of cellophane tape or labels is exposed or on which there are traces of where labels have been removed. Such discs can get caught inside the player and damage it.
Contents Connections Playback Settings How to handle media Display Appendix Cleaning discs • Do not get fingerprints, oil or dirt on discs. • Take special care not to scratch discs when removing them from their cases. • Do not bend or heat discs. • Do not enlarge the hole in the center. • Do not write on the labeled (printed) surface with ball-point pens, pencils, etc., or stick new labels on discs.
Contents Connections Playback Settings Explanation of terms S Sampling frequency Sampling involves taking a reading of a sound wave (analog signal) at regular intervals and expressing the height of the wave at each reading in digitized format (producing a digital signal). The number of readings taken in one second is called the “sampling frequency”. The larger the value, the closer the reproduced sound is to the original.
Contents Connections Playback Settings Tips Trademark information Adobe, the Adobe logo and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.
Contents Connections Playback Settings Tips Specifications 22Audio performance • Analog output Channels: Playable frequency range: Playable frequency response: S/N: Dynamic range: Harmonic distortion: Wow & flutter: Output level: Headphone output: Signal type: Sampling frequency: Usable discs: • Digital output Coaxial: Optical: Emission wavelength: • Digital input signal format Format: Coaxial input: Optical Optical input: Optical wavelength: Front panel Display [Super Audio CD] [CD] 2 channels 2
Contents Connections 22General Power supply: Power consumption: Power consumption in standby mode: Playback Settings Tips AC 120 V, 60 Hz 29 W 0.2 W For purposes of improvement, specifications and design are subject to change without notice.
Contents Connections Index Settings vv F vv A vv B Bit rate························································ 67, 70, 73 Brightness······························································· 29 vv I Installing the driver software·································· 45 vv D Direct search··························································· 32 Display···································································· 10 Dynamic range······················································
Contents Connections Playback Settings Appendix Tips 9/32 (7) 22Dimensions 5 63/64 (152) 13/64 (5) 8 55/64 (225) 2 21/64 (59) 13 27/64 (341) 12 61/64 (329) 1 49/64 (45) Unit : in. (mm) 5 13/64 (132) 22Weight : 17 lbs 10 oz (8.
D&M Holdings Inc.
