User guide

ManualsBrandsMarantz ManualsHome AudioSA1/N1G

Model SR5200 User Guide

AV Surround Receiver

Summary of content (34 pages)

PAGE 1
R Model SR5200 User Guide AV Surround Receiver
PAGE 2
ENGLISH ITALIANO WARRANTY GARANZIA For warranty information, contact your local Marantz distributor. RETAIN YOUR PURCHASE RECEIPT Your purchase receipt is your permanent record of a valuable purchase. It should be kept in a safe place to be referred to as necessary for insurance purposes or when corresponding with Marantz.
PAGE 3
CE MARKING English The SR5200 is in conformity with the EMC directive and low-voltage directive. Français Le SR5200 est conforme à la directive EMC et à la directive sur les basses tensions. Deutsch Das Modell SR5200 entspricht den EMC-Richtlinien und den Richtlinien für Niederspannungsgeräte. Nederlands De SR5200 voldoet aan de EMC eisen en de vereisten voor laag-voltage. Español El SR5200 está de acuerdo con las normas EMC y las relacionadas con baja tensión.
PAGE 4
a s d fg h L j k R R L CD L OUT R PRE OUT DIGITAL IN/OUT FRONT FRONT ANTENNA SURR. OUT DIG-4 IN L AM TAPE MONITOR MONI TOR TAPE OUT VCR1 OUT VCR1 OUT CDR /MD DSS/ VCR2 OUT DSS/ VCR2 OUT R CDR /MD SURR. CENTER CENTER OUT SR5200 SURROUND DIG-3 IN SUB WOOFER SUB WOOFER VCR1 VCR1 VCR1 VCR1 DSS/ VCR2 DSS/ VCR2 DSS/ VCR2 DSS/ VCR2 TV TV TV DIG.OUT COAX GND CENTER SURR. CENTER DIG-2 IN FM (75Ω) SWITCHED 100W MAX SURR.
PAGE 5
DIGITAL OUT L R FM (75Ω) GND AM ANTENNA L R 7CH INPUT CENTER SUB WOOFER CENTER PRE OUT CVBS VIDEO IN AUDIO VIDEO S-VIDEO OUT OUT OUT DIGITAL AUDIO VIDEO S-VIDEO OUT OUT OUT OUT DVD PLAYER L L R R FRONT SURR. SURR. CENTER SUB WOOFER SURR. CENTER SURR. FRONT DIGITAL IN/OUT TV DIG.OUT OPT DIG-1 IN DIG-2 IN DIG.
PAGE 6
FM EXTERNAL ANTENNA FM (75Ω) GND AM 7CH INPUT CENTER SUB WOOFER CENTER PRE OUT L L R R FRONT SURR. SURR. CENTER SUB WOOFER SURR. CENTER SURR. FRONT DIG.OUT OPT DIG-1 IN DIG-2 IN DIG.
PAGE 7
FOREWORD .................................................................................................................................................................... 2 PRECAUTIONS ........................................................................................................................................................................................................ 2 INTRODUCTION ...........................................................................................................
PAGE 8
ENGLISH FOREWORD PRECAUTIONS This section must be read before any connection is made to the mains supply. The following precautions should be taken when operating the equipment.
PAGE 9
FEATURES Thank you for purchasing the Marantz SR5200 DTS/Dolby Digital Surround receiver. This remarkable component has been engineered to provide you with many years of home theater enjoyment. Please take a few minutes to read this manual thoroughly before you connect and operate the SR5200. As there are a number of connection and configurations options, you are encouraged to discuss your own particular home theater setup with your Marantz A/V specialist dealer.
PAGE 10
ENGLISH i S. ( Source) DIRECT button FRONT PANEL FEATURES (SEE PAGE iii.) When this button is pressed, the tone control circuit is bypassed as well as Bass Management. Notes: The surround mode is automatically switched to AUTO when the source direct function is turned on. Additionally, Speaker Configurations are fixed automatically as follow.
PAGE 11
Optical and Coaxial Connect digital input of your digital recording equipment. All connections to the rear panel should be made with the entire system powered off. To avoid errors, it is advisable to connect one cable at a time between the various components. ¡1 DIGITAL inputs Dig.1,2 (Optical) and Dig. 3, 4 (Coaxial) Connect each input to the digital output of your source equipment. Use the system setup menu to assign digital input to appropriate source. (see page.
PAGE 12
REMOTE CONTROL BUS CONNECTIONS ENGLISH This unit is equipped with a remote control function. By connecting this unit’s remote control jacks to a Marantz CD player or tape deck equipped with remote control (RC-5) jacks, it allows system remote control to operate. Connect REMOTE CONTROL OUT jack of SR5200 to REMOTE CONT. IN of other Marantz equipment, i.e. CD player or tape deck, by using an RCA pin cable.
PAGE 13
. Numeric buttons 1 to 9 (A, B, C ... Z, –) / Surround mode buttons OPERATION Numeric buttons These buttons are used to enter figures in the selection of a tuner preset station and station name preset or to set select a CD track number, etc. The functions of these buttons are dependent on the function button selected. The provided remote control unit is a universal remote controller. The POWER button x, numeric buttons . and control buttons ⁄2 are used in common across different input source components.
PAGE 14
ENGLISH ⁄7 CLEAR button PROGRAMMING THE REMOTE CONTROLLER This button is used to cancel for certain memory or programming operations. The remote controller RC5200SR must be programmed to use the codes for your appliances of different brands. This is done by keying in a 4-digit code or by scanning the codes until the correct one is found. We recommend to using the 4-digit code. This mode is faster and more reliable.
PAGE 15
OPERATION OF REMOTE CONTROL UNIT DSS 1. Remote control The distance between the transmitter of the remote control unit and the IR SENSOR of the SR5200 should be less than about 5 meters. If the transmitter is pointed to a direction other than the IR SENSOR or if there is an obstacle between them, remote control may not be possible. DVD Remote-controllable range TV VCR SR5200 CD TAPE CDR MD pr Ap ox. 5m 60° Remote control unit (RC5200SR) 2.
PAGE 16
ENGLISH SET-UP After all components are connected, initial setup must be performed. ON SCREEN DISPLAY MENU SYSTEM The SR5200 incorporates an on-screen menu system, which makes various operations possible by using the cursor ( , , , ) and OK buttons on the remote controller. The settings made with these buttons are also shown in the on-screen display.
PAGE 17
SYSTEM SETUP 2/2 (SELECTING THE DIGITAL INPUT) 1. 2. ENGLISH OSD MAIN MENU Four digital inputs can be assigned for the desired source. Use this menu to determine which source is connected to which input. Press the AMP button c. Press the MENU button n to display the “MAIN MENU” of the onscreen display menu. Choose a desired item in the contents with or button, and press the OK button to select. Display will change to menu for each item.
PAGE 18
ENGLISH Select the type of front speakers with or button. Select the type of center speaker with or button. Select the type of surround speakers with or button. Select the surround center speaker YES or NO with or button. SUBWOOFER: Select the subwoofer speaker YES or NO with or button. FRONT -L/R : CENTER : SURR-L/R : SURR.
PAGE 19
ENGLISH SURROUND MODE SOURCE DIRECT : Switch the source direct ON or OFF with or button. This bypasses the surround processing and crossover for the main speakers (front left and right will be full range and the subwoofer will be ON) Note: Surround mode cannot be changed in Source Direct mode. SURR-MODE : Select the surround mode with or button. NIGHT MODE : Switch the NIGHT MODE ON or OFF with or button. Selecting the Night Mode ON is effective in Dolby Digital only, and it compresses the dynamic range.
PAGE 20
ENGLISH BASIC OPERATION 3. Recalling a Preset Station 1. Press the F/P button !5 to change the display to preset. 2. Select the desired preset station by pressing TUNING/PRESET or button !4 on the front panel or press CHANNEL button ⁄2 on the remote. LISTENING TO THE TUNER MANUAL TUNING 1. 2. 3. 4. 5. To select the tuner as the source, press the TUNER button t on the front panel or press the TUNER button c on the remote.
PAGE 21
PROGRAMME TYPE (PTY) DISPLAY The station name preset function allows the name of each preset channel to be entered using alphanumeric characters. The Station Name button is valid only in the tuner mode. Before station name preset operation, store stations with the preset memory operation. 1. Press the MEMORY button !3 on the front panel or MEMO button ⁄6 on the remote for more than 3 seconds. 2. The left most column of the station name indicator flashes, indicating the character entry ready status.
PAGE 22
ENGLISH PLAYBACK OPERATION SETTING THE SLEEP TIMER NORMAL PLAYBACK Set the sleep timer while the power is turned on. 1. Turn the power ON and press the SLEEP button o / ¤3. 2. Press the SLEEP button o / ¤3 the number of times to set the desired sleep time in minutes. Each press of the SLEEP button o / ¤3 or changes the display in the following order: 1. 2. 3. 4. Press the POWER button q / x.
PAGE 23
When a function selector button or surround mode button is pressed VIDEO: Displays the current video source. When TV,DSS, DVD, VCR1 or AUX is selected with the function selector, both AUDIO and VIDEO shows the same name. AUDIO: Displays the current analog audio input source. DIGITAL: Displays the current digital input source.
PAGE 24
5.SLEEP TIMER ENGLISH When the SLEEP button o / ¤3 is pressed, the setting on or off and the remaining time of the sleep timer function are displayed. You can change the mode between on, off and the amount of time to elapse before the unit will shut itself off by cycling the SLEEP button o/¤3. 6. OSD OFF When OSD button ¤2 is pressed, OSD system will be bypassed after 3 seconds. Then there is no indication on the TV display. Press the OSD button ¤2 again to activate the OSD.
PAGE 25
The SR5200 incorporates digital signal processors (DSP) which can reproduce various surround effects you experience in concert halls and movie theaters, etc. These Surround Modes, are provided to reproduce a variety of surround sound effects, according to the content of the source to be played. FEATURES Surroud mode 1. AUTO When this mode is selected, the receiver determines whether the digital input signal is Dolby Digital, PCM-audio or DTS.
PAGE 26
The relation between the selected surround mode and the input signal ENGLISH The surround mode is selected with the surround mode selector knob of the SR5200 or the remote control unit. However, the sound from the speakers depend upon the relationship between the selected surround mode and the input signal. They are as follows; Surround Input Signal Mode Auto Dolby Digital (5.1ch) Dolby Digital (2ch) Dolby Digital (2ch:Lt/Rt) 96kHz PCM PCM(Audio) Analog DTS (5.1ch) Stereo Dolby Digital (5.
PAGE 27
If the unit does not operate properly, check items shown in the following table. If your trouble cannot be recovered with the remedy actions listed in the following table, malfunction of the internal circuitry is suspected; immediately unplug the power cable and contact your dealer, nearest Marantz distributor or the Marantz Service Center in your country. In case of trouble, check the following before calling for service: 1. Are the connections made properly ? 2.
PAGE 28
GENERAL MALFUNCTION ENGLISH If the equipment malfunctions, this may be because an electrostatic discharge or AC line interference has corrupted the information in the equipment memory circuits.
PAGE 29
MD PLAYERS SETUP CODES Denon ................................................................................ 1900 Kenwood ................................................................. 1708, 1853 Marantz ............................................................................. 1207 Onkyo ................................................................................ 1895 Optimus ............................................................................. 1090 Pioneer ............................
PAGE 30
Majestic ............................................................................. 0043 Marantz ......................................................... 0057, 0081, 1581 Matsushita ......................................................................... 0277 Megatron ................................................................. 0172, 0205 Memorex ..... 0043, 0083, 0177, 0181, 0205, 0206, 0277, 0490 Midland .......................................................... 0044, 0074, 0078 Mitsubishi .....
PAGE 31
NAD ................................................................................... 0085 NEC ......................................................................... 0094, 0131 Nikko ................................................................................. 0064 Noblex ............................................................................... 0267 Olympus ............................................................................ 0062 Optimus ......
PAGE 32
DVD Aiwa .................................................................................. 0668 Apex .................................................................................. 0699 Denon ...................................................................... 0517, 0661 Fisher ................................................................................ 0697 GE ..................................................................................... 0549 Harman/Kardon .................................
PAGE 33
TECHNICAL SPECIFICATIONS FM TUNER SECTION Frequency Range ................................................................................................................................................. 87.5 - 108.0 MHz Usable Sensitivity ............................................................................................................................................. IHF 1.8 µV/16.4 dBf Signal to Noise Ratio ........................................................................................
PAGE 34
COUNTRY ALGERIE ARMENIA AUSTRALIA AUSTRIA BAHREIN BANGLADESH BELGIUM BULGARIA CANADA CHINA CYPRUS CZECH REPUBLIC DENMARK DUBAI EGYPT ESTONIA F.Y.R.O.M. FINLAND FRANCE GERMANY GREECE HEADQUARTERS EUROPE: HONG KONG HUNGARY ICELAND INDIA IRAN IRELAND ISRAEL ITALY IVORY COAST JAPAN KOREA KUWAIT LATVIA LEBANON LITHUANIA MALAYSIA MALTA MAURITIUS MILITARY MARKET EUROPE NETHERLANDS NEW ZEALAND NORWAY OMAN POLAND PORTUGAL PROFESSIONAL EUROPE PROFESSIONAL U.S.A.