Model RC101 User Guide Remote Controller
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
ENGLISH CE MARKING ESPAÑOL WARRANTY For warranty information, contact your local Marantz distributor. GARANTIA Para obtener información acerca de la garantia póngase en contacto con su distribuidor Marantz. English RETAIN YOUR PURCHASE RECEIPT Your purchase receipt is your permanent record of a valuable purchase. It should be kept in a safe place to be referred to as necessary for insurance purposes or when corresponding with Marantz.
INTRODUCTION ....................................1 A NOTE ABOUT RECYCLING ..............1 FEATURES .............................................1 SPECIFICATIONS ..................................1 FUNCTION AND OPERATION ..............2 OPERATION OF REMOTE CONTROLLER ..3 REMOTE CONTROL..........................................................3 LOADING BATTERIES.......................................................3 CAUTIONS ON BATTERIES..............................................
ENGLISH z FUNCTION AND OPERATION The remote controller is a universal remote controller. The SOURCE ON/OFF button and control buttons are used in common across different input source components. The input source controlled with the remote controller changes when one of the input selector buttons is pressed. z b AMP - MUTE button (When Zone D mode is selected) These buttons are used to turn on or off, for the Marantz AV receiver in main room.
REMOTE CONTROL The distance between the transmitter of the remote controller and the IR SENSOR of the AV Receiver/IR Receiver should be less than 5 meters. If the remote controller is pointed in a direction other than the IR SENSOR or if there is an obstacle between them, use of the remote controller may not be possible. LOADING BATTERIES CAUTIONS ON BATTERIES The life of the batteries used with the remote controller is about 4 months with normal use.
ENGLISH CONTROLLING MARANTZ COMPONENTS CONTROLLING MARANTZ SOURCE COMPONENTS 1. 2. CONTROLLING MARANTZ RECEIVER / AV AMPLIFIER (Refer to p. 9) Press the desired SOURCE button. Press the desired operation buttons to play the selected component. • For details, refer to the component’s user guide. • It may not be possible to operate some models.
ENGLISH CONTROLLING A MARANTZ DVD PLAYER (DVD) • (*) RC101 dose not have the PRESET code library for this key. SOURCE ON/OFF MENU/INPUT CH3/4 ENTER 3(CURSOR) 4(CURSOR) 2(CURSOR) 1(CURSOR) 2 9 ; § ∞ 6 5 DISC+/T.
ENGLISH CONTROLLING A MARANTZ CD PLAYER (CD) CONTROLLING A MARANTZ CD RECORDER (CDR) CONTROLLONG A MARANTZ TAPE DECK (TAPE) • (*) RC101 dose not have the PRESET code library for this key. • RC101 dose not have the PRESET code library for this device. • RC101 dose not have the PRESET code library for this device. SOURCE ON/OFF MENU/INPUT CH3/4 ENTER 3(CURSOR) 4(CURSOR) 2(CURSOR) 1(CURSOR) 2 9 ; § ∞ 6 5 DISC+/T.
NORMAL MODE (When operating Marantz AV equipment products) This remote controller is preset with a total of 12 types of remote codes, including Marantz TV (television), DVD, VCR (VCR deck), DSS (satellite broadcasting tuner), TUNER 1, TUNER 2, CD, CD-R, TAPE (tape deck), AUX1 and AUX2. Learning is not necessary for Marantz products. You can use these products without setting any codes. 1. Press the SOURCE button. For this example, press DVD.
ENGLISH LEARN MODE 4. This remote controller is capable of learning and storing codes used by other remote controls that you already own. For codes which are not learned, the remote controller will transmit either the Marantz preset codes from the initial settings, or remote codes from another manufacturer’s AV equipment which is set by the customer. The receiver sensor for the remote control signals is located at the top of the remote controller.
Creating copies using clone mode All of the codes programmed to the RC101 remote controller can be copied to another RC101 using a few simple operations. • The remote controller can copy the entire contents. • When copying the entire contents, all programmed codes are copied. Note: The clone function can only be used for copying when using the same model (RC101) for both the transmitting and receiving remote controller. Press the ENTER cursor button on the receiving remote controller.
SETUP CODES TV Acer .......................................................... 1141 Admiral .................................1002, 1009, 1089 Aiko .......................................................... 1059 Aiwa................................................1117, 1118 Akai .......................................................... 1001 Amtron ...................................................... 1023 Anam ........................................................ 1113 Anam National......................
PIONEER ........ 3020, 3021, 3062, 3063, 3064 QUASAR .................................................. 3008 RCA ................. 3011, 3014, 3065, 3066, 3067 3068, 3069 REALISTIC................ 3011, 3014, 3020, 3042 3054, 3057 ROTEL ..................................................... 3010 RS ORIGINAL .......................................... 3070 SAE ................................................3010, 3083 SAMSUNG ............................................... 3071 SANSUI .....................
www.marantz.com You can find your nearest authorized distributor or dealer on our website. is a registered trademark.
