User Manual

9
To charge PMD-901V, use either of the following methods:
Method A:
Use a standard mini-USB cable to connect PMD-901V’s USB port to one of
the following:
• a USB port on your computer (powered on)
• the included USB power adapter (connected to a power outlet)
• the included car charger (connected to the cigarette lighter of a car,
while running)
Method B:
Attach PMD-901V to the charging base (make sure PMD-901V’s display is
facing the same direction as the charging base’s USB port). Use a standard
mini-USB cable to connect the charging base to one of the following:
• a USB port on your computer (powered on)
• the included USB power adapter (connected to a power outlet)
• the included car charger (connected to the cigarette lighter of a car,
while running)
Alternatively, use a power adapter (5 V, 1 A, center-positive, 2.5 mm barrel
diameter, not included) to connect the charging base to a power outlet.
If PMD-901 is in CarDV Mode, when you remove PMD-901V from the
charging base, it will power off automatically. See Settings to learn more
about this.