User Manual

8
Operation
To power PMD-901V on/off, press and hold the Power (
) button for 2
seconds. When you power it on, you will hear a “beep,” the display will
turn on, and PMD-901V will start video recording.
While PMD-901V is recording, a light next to the Light (
) button will be
flashing red. While not recording, the light will be lit green.
Note: This auto-record feature was added for convenience as PMD-901V
will be most commonly used for continuous and immediate video
recording. To stop video recording, simply press the Video ( ) button.
Charging
When PMD-901V’s battery life is low, the battery (
) icon will flash in
the display, and you will hear an alert tone. When this happens, charge
PMD-901V.
While PMD-901V is charging, a light next to the Power (
) button will be
lit blue. This light will turn off after it is fully charged.
Important: Before using PMD-901V for the first time, charge it fully.
Note: It takes approximately 4 hours to charge PMD-901V fully while not
being used.