User Manual

19
Memory
When PMD-901V’s memory is full, Card Full will appear in the display, and you
will hear an alert tone. When this happens, make more space available in its
memory. PMD-901V cannot record when its memory is full.
Tip: When CarDV Mode is on, you can use the Loop Record feature to set
PMD-901V to automatically overwrite the oldest video file with the most current
video file once its memory is full. This lets you use PMD-901V continuously and
transfer files from it as desired (as opposed to after each time the memory is
full). See Settings to learn how to do this.
To transfer files from PMD-901V:
1. Use a standard mini-USB cable to connect PMD-901V’s USB port to your
computer (powered on).
2. Your computer will recognize PMD-901V as a mass-storage device
(Removable Disk), similar to a USB drive or SD card. Enter your password
(see Settings to learn how to set and enter your password).
3. Open Removable Disk to view its contents. To access the recorded files,
open FILE and then 100RECOR. On the root level of PMD-901V, there is a
TXT file named OPERATIONDIARY, which is an automatically generated
list of dates and times when PMD-901V was powered on or off and when
recording was started or stopped.
4. Click and drag the files from PMD-901V onto your computer’s hard disk.
We recommend deleting the files from PMD-901V after moving them to
make more space available in its memory.