Quick start Guide

8
Operation
To power PMD-901V on/off, press and hold the Power ( ) button for 2
seconds. When you power it on, you will hear a “beep,” the display will turn on,
and PMD-901V will start video recording.
Note: This auto-record feature was added for convenience as PMD-901V will
be most commonly used for continuous and immediate video recording. To
stop video recording, simply press the Video ( ) button.
Display
1. Video Resolution (This icon will be a
camera during normal operation. While in
CARDV Mode, the icon will be a car,
indicating that the picture is using a wide-
angle lens. See the User Guide to learn
more about this.)
2. Available Recording Time
3. Available Battery Life
4. Megapixels
5. Current GPS Position (This icon will be
shown only when GPS is active.)
6. GPS Active
(green) / Inactive (red)
7. Elapsed Recording Time
8. Camera ID
9. Current Date/Time
10. Available Memory
1280x720 P60
5M
DSJ_M9000000_Z0
2015/05/12 02:01:02 26.50G/29.01G
015:26:07
000:01:23
41.994, 71.467
7
2
9
3
5
8
1
4
6
10
Note: All icons will be white or gray
while not recording, flashing red
while recording, or solid red while
in “pre-record” mode.