User guide

ENGLISH
FRANCÇAIS
4
OFF ON OFF ON OFF ON
AUX/DVD
CD
REC SELECTOR
OFF
COPY
LOUDNESS
SOURCE DIRECT
SPEAKER
MIN
MAX
PHONO
TUNER
CD-R
MD/TAPE
CD-R
-
+
-
+
VOLUME
L
R
PHONO CD TUNER AUX/DVD CD-R
MUTE
INPUT SELECTOR
MD/TAPE
MD/TAPE
BASS
PHONES
POWER ON/OFF
BALANCE TREBLE
INTEGRATED AMPLIFIRE PM8200
qw
OFF ON OFF ON OFF ON
AUX/DVD
CD
REC SELECTOR
OFF
COPY
LOUDNESS
SOURCE DIRECT
SPEAKER
MIN
MAX
PHONO
TUNER
CD-R
MD/TAPE
CD-R
-
+
-
+
VOLUME
L
R
PHONO CD TUNER AUX/DVD CD-R
MUTE
INPUT SELECTOR
MD/TAPE
MD/TAPE
BASS
PHONES
POWER ON/OFF
BALANCE TREBLE
INTEGRATED AMPLIFIRE PM8200
q
e
w
PLAYING PROGRAM SOURCE
Playing an analog disk
1. Set the INPUT SELECTOR switch q to PHONO.
2. Play the analog turntable.
3. Adjust the volume with the VOLUME control w.
Caution for analog disk play
- Reduce the volume to the minimum position before replac-
ing the cartridge or placing the stylus on the disk.
- Do not apply shock to the turntable during play. Otherwise
the stylus may jump and damage the disk surface.
- Avoid placing the turntable near the speakers. This may
cause howling and become out of control the VOLUME con-
trol.
- Do not turn off the turntable while the stylus is on a disk.
Playing a CD player
1. Set the INPUT SELECTOR switch q to CD.
2. Play the CD player.
3. Adjust the volume with the VOLUME control w.
Playing a source connected to AUX/DVD
The source component connected to any of the AUX/DVD in-
put jacks on the rear panel can be played as described below.
1. Set the INPUT SELECTOR switch q to AUX/DVD.
2. Play the component connected to the selected input.
3. Adjust the volume with the VOLUME control w.
Playing FM/AM tuner
1. Set the INPUT SELECTOR switch q to TUNER.
2. Play the tuner.
3. Adjust the volume with the VOLUME control w.
Playing a CD-R
1. Set the INPUT SELECTOR switch q to CD-R.
2. Play the CD recorder.
3. Adjust the volume with the VOLUME control w.
Playing a TAPE
1. Set the INPUT SELECTOR switch q to TAPE.
2. Play a pre-recorded tape on the tape deck.
3. Adjust the volume with the VOLUME control w.
RECORDING OF TAPE DECKS
Recording a CD-R, a MD, or a tape
A program source such as the analog turntable, tuner or CD
player can be recorded onto CD-R, MD, or tape as described
below.
Recording from CD
1. Set the REC SELECTOR switch e to CD.
2. Play a CD on the CD player.
3. Operate the CD recorder, MD, or the tape deck to start
recording.
Recording from the analog turntable
1. Set the REC SELECTOR switch e to PHONO.
2. Play an analog disk on the turntable.
3. Operate the CD recorder, MD, or the tape deck to start
recording.
Recording from a source connected to TUNER or AUX/DVD
1. Set the REC SELECTOR switch e to TUNER or AUX/DVD.
2. Play the source component connected to the selected in-
put.
3. Operate the CD recorder, MD, or the tape deck to start
recording.
Copying a CD-R to a MD or a TAPE
Regardless of the program source selected with the INPUT
SELECTOR switch q, when copying from a CD recorder to a
TAPE deck, set the REC SELECTOR switch e to CD-R → MD/
TAPE.
- You can listen to another program source selected with the
INPUT SELECTOR switch q while you are copying.