Owner's Manual
Table Of Contents
- Owner’s Manual
- Contents
- Accessories
- Features
- Part names and functions
- Connections
- Contents
- Cables used for connections
- Connecting speakers
- Connecting a playback device
- Connecting a recording device
- Connecting to a device with digital audio output connectors
- Connecting a USB memory device to the USB port
- Connecting to a home network (LAN)
- Connecting devices with remote control connectors
- Connecting the power cord
- Playback
- Settings
- Tips
- Troubleshooting
- Power does not turn on / Power is turned off
- Operations cannot be performed through the remote control unit
- Display on this unit shows nothing
- No sound comes out
- Sound is interrupted or noise occurs
- Desired sound does not come out
- AirPlay cannot be played back
- USB memory devices cannot be played back
- File names on the USB memory device are not displayed properly
- Bluetooth cannot be played back
- The Internet radio cannot be played back
- Music files on PC or NAS cannot be played back (Music server)
- Various online services cannot be played
- Cannot connect to a wireless LAN network
- Audio from digital devices cannot be played back (Coaxial/Optical)
- The input source switches to “Optical 1”, “Optical 2” or “Coaxial”
- Update/upgrade error messages
- Resetting network settings
- Appendix
- Quick Start Guide
- Product Info
- Warranty
- Safety Instructions
- Notes on Radio
n
Share Wi-Fi setting from an iOS device
Use your iOS device (iPhone/iPod/iPad) to connect to the network. By
connecting your iOS device to this unit using Wi-Fi, the unit can be
automatically connected to the same network as your device.
1. Select “Share Wi-Fi setting from an iOS device” on the display.
2. Check that your iOS device is connected to the wireless LAN (Wi-
Fi) router and select “Marantz PM7000N” from “SET UP NEW
AIRPLAY SPEAKER...” at the bottom of the Wi-Fi configuration
screen of your iOS device.
3. Tap “Next” on the screen of the iOS device.
0
The iOS device firmware version needs to support iOS 7 or later.
n
WPS Router
Use a WPS-compatible router to connect using the push button
method.
1. Select “WPS Router” on the display.
2. Switch to the WPS mode by pressing the WPS button of the router
you wish to connect to.
0
The time for pressing the button varies depending on the router.
3. Press ENTER within 2 minutes.
Contents
Connections Playback Settings Tips Appendix
89
Front panel Rear panel
Remote control
unit
Index