Owner's Manual
Table Of Contents
- Owner’s Manual
- Contents
- Accessories
- Features
- Part names and functions
- Connections
- Contents
- Cables used for connections
- Connecting speakers
- Connecting a playback device
- Connecting a recording device
- Connecting to a device with digital audio output connectors
- Connecting a USB memory device to the USB port
- Connecting to a home network (LAN)
- Connecting devices with remote control connectors
- Connecting the power cord
- Playback
- Settings
- Tips
- Troubleshooting
- Power does not turn on / Power is turned off
- Operations cannot be performed through the remote control unit
- Display on this unit shows nothing
- No sound comes out
- Sound is interrupted or noise occurs
- Desired sound does not come out
- AirPlay cannot be played back
- USB memory devices cannot be played back
- File names on the USB memory device are not displayed properly
- Bluetooth cannot be played back
- The Internet radio cannot be played back
- Music files on PC or NAS cannot be played back (Music server)
- Various online services cannot be played
- Cannot connect to a wireless LAN network
- Audio from digital devices cannot be played back (Coaxial/Optical)
- The input source switches to “Optical 1”, “Optical 2” or “Coaxial”
- Update/upgrade error messages
- Resetting network settings
- Appendix
- Quick Start Guide
- Product Info
- Warranty
- Safety Instructions
- Notes on Radio
IR Control
Assign operations on this unit to the remote control of your TV. This
enables you to operate this unit with the remote control of your TV.
1
Use ui to select the operation on this unit to be
performed with the remote control of your TV and
press ENTER.
Volume Up / Volume Down / Mute / Power Toggle / Power On /
Power Off / Input Optical In 1 / Input Optical In 2 / Input
Coaxial In /Input CD /Input AUX/ Input Recorder
0
The operations indicated by a check mark are already assigned to the TV
remote control. To assign an operation to a different button, press ENTER
while the operation is indicated by a check mark to remove the check mark,
then configure the setting again.
2
Follow the instructions in the display to configure the
setting.
The set operation on this unit is indicated by a check mark after the
setting is complete.
Language
Sets the language for display the menu.
English / Français / Español (Default : English)
Auto-Standby
Sets the amount of time that must elapse without unit operation or an input
signal before the unit goes into standby automatically.
Off
(Default):
The unit does not go into standby
automatically.
1min: The unit goes into standby after 1 minutes.
5min: The unit goes into standby after 5 minutes.
15min: The unit goes into standby after 15 minutes.
Other:
Sets the minutes (between 1 and 99) before
the unit automatically goes into standby.
After setting the amount of time with 0 – 9,
+10 buttons, press ENTER to confirm the
setting.
Contents
Connections Playback Settings Tips Appendix
81
Front panel Rear panel
Remote control
unit
Index