Owner's Manual
Table Of Contents
- Owner’s Manual
- Contents
- Accessories
- Features
- Part names and functions
- Connections
- Contents
- Cables used for connections
- Connecting speakers
- Connecting a playback device
- Connecting a recording device
- Connecting to a device with digital audio output connectors
- Connecting a USB memory device to the USB port
- Connecting to a home network (LAN)
- Connecting devices with remote control connectors
- Connecting the power cord
- Playback
- Settings
- Tips
- Troubleshooting
- Power does not turn on / Power is turned off
- Operations cannot be performed through the remote control unit
- Display on this unit shows nothing
- No sound comes out
- Sound is interrupted or noise occurs
- Desired sound does not come out
- AirPlay cannot be played back
- USB memory devices cannot be played back
- File names on the USB memory device are not displayed properly
- Bluetooth cannot be played back
- The Internet radio cannot be played back
- Music files on PC or NAS cannot be played back (Music server)
- Various online services cannot be played
- Cannot connect to a wireless LAN network
- Audio from digital devices cannot be played back (Coaxial/Optical)
- The input source switches to “Optical 1”, “Optical 2” or “Coaxial”
- Update/upgrade error messages
- Resetting network settings
- Appendix
- Quick Start Guide
- Product Info
- Warranty
- Safety Instructions
- Notes on Radio
Playing digital input
.
OPT/COAX
1
Prepare for playback.
Check the connection, then turn on this units. (“Connecting to a
device with digital audio output connectors” (v p. 29))
2
Press OPT/COAX to switch the input source to “Optical
1”, “Optical 2” or “Coaxial”.
3
Play the component connected to this unit.
0
If the sampling frequency cannot be detected, “Signal Unlock” will
be displayed.
0
“Unsupported” is displayed when audio signals that are not
supported by this unit are input.
Contents Connections Playback Settings Tips Appendix
60
Front panel Rear panel
Remote control
unit
Index