Owner's Manual
Table Of Contents
- Owner’s Manual
- Contents
- Accessories
- Features
- Part names and functions
- Connections
- Contents
- Cables used for connections
- Connecting speakers
- Connecting a playback device
- Connecting a recording device
- Connecting to a device with digital audio output connectors
- Connecting a USB memory device to the USB port
- Connecting to a home network (LAN)
- Connecting devices with remote control connectors
- Connecting the power cord
- Playback
- Settings
- Tips
- Troubleshooting
- Power does not turn on / Power is turned off
- Operations cannot be performed through the remote control unit
- Display on this unit shows nothing
- No sound comes out
- Sound is interrupted or noise occurs
- Desired sound does not come out
- AirPlay cannot be played back
- USB memory devices cannot be played back
- File names on the USB memory device are not displayed properly
- Bluetooth cannot be played back
- The Internet radio cannot be played back
- Music files on PC or NAS cannot be played back (Music server)
- Various online services cannot be played
- Cannot connect to a wireless LAN network
- Audio from digital devices cannot be played back (Coaxial/Optical)
- The input source switches to “Optical 1”, “Optical 2” or “Coaxial”
- Update/upgrade error messages
- Resetting network settings
- Appendix
- Quick Start Guide
- Product Info
- Warranty
- Safety Instructions
- Notes on Radio
Notes
on
radio
USA
CANADA
FCC
Information (For US customers)
1.
COMPLIANCE INFORMATION
• Product
Name
:
Network
Integrated Amplifier
• Model Number: PM7000N
• CONTAINS TRANSMITTER MODULE
FCC
ID: RAX-AIOS4-0S
This product complies
with
Part 15
of
the
FCC
Rules. Operation
is
subject to the following
two
conditions:
11)
this product may
not
cause harmful interference. and
12)
this product
must
accept
any interference received, including interference that may cause undesired operation.
Marantz America, LLC.
la
D&M
Holdings Company)
100 Corporate Drive,
Mahwah, NJ, 07430, U.S.A.
Tel. 201-762-6500
2. IMPORTANT NOTICE: DO
NOT
MODIFY THIS PRODUCT
This product,
when
mstalled as indicated in the instructions contained in this manual, meets
FCC
requirements. Modification
not
expressly approved by Marantz may void your authority, granted by
the
FCC,
to
use the product.
3. IMPORTANT (For Network)
When connecting this product
to
network
hub or router, use only a shielded
STP
or ScTP LAN cable
which is available at retailer. Follow all installation Instruc11ons. Failure
to
follow
InstructIons could
void your authority, granted by the
FCC,
to use the product.
4. CAUTION (For Bluetooth/Wi-Fi)
•
To
comply
with
FCC
RF
exposure compliance requirement. separation distance
of
at least 20
cm
must
be maintained between this product and all persons.
• This product and its antenna
must
not be co-located
or
operating in conIunction
with
any other
antenna or transmitter.
• 5.15-5.25
GHz
band is restricted
to
indoor operations onl
y.
5. NOTE
This product has been tested and found
to
comply
with
the limits for a Class B digital device,
pursuant
to
Part 15
of
the
FCC
Rules. These limits are designed
to
provide reasonable protection
against harmful interference
in
a residential installation.
This product generates, uses and can radiate radio frequency energy and, if not installed and used
in
accordance
with
the instructions, may cause harmful interference to radio communications.
However, there is
no
guarantee that interference will not occur
in
a particular installation. If this
product does cause harmful interference to radio or television reception, which can be determined
by turning the product
OFF
and ON, the user is encouraged
to
try
to
correct the interference by one
or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the product into
an
outlet
on
a circuit different from that to which the receiver
is
connected.
• Consult the local retailer authorized
to
distribute this type
of
product
or
an
experienced radio /
1V technician for help.
INFORMATION
FCC
(Pour
la
clientele etasunienne)
1.
INFORMATIONS
DE
CONFORMITE
• Nom du produit: Amplificateur lntegre Reseau
• Numero de modele: PM7000N
• CONTIENT MODULE EMETTEUR
FCC
ID: RAX-AIOS4-0S
Ce
produ1t
est conforme a
la
section 15 du reglement
FCC.
L'ut11isation
est suIette aux deux
cond1t1ons
suivantes:
(1)
ce produit ne provoque pas d"interferences nocives et
12)
ce produit
do1t
accepter toute
interference, y compris les interferences pouvant entrainer
un
fonctionnement non souhaitable.
Marantz America,
LLC.
la
D&M
Holdings Company)
100 Corporate Dnve,
Mahwah, NJ, 07430, U.S.A
Tel. 201-762-6500
2. REMARQUE IMPORTANTE: NE PAS MODIFIER
CE
PRODUIT
Ce
produit, lorsqu'il est installe
comme
ind1que dans les instructions de ce manuel, est
conforms
aux normes
FCC.
Les modifications qui ne sont pas express8ment approuvees par Marantz
peuvent annular l'autorisation
FCC
a utiliser
le
produit
3. IMPORTANT (Pour reseau)
Lars du branchement de ce produit a un routeur ou a
un
concentrateur reseau, n'utilisez qu'un cable
STP
ou ScTP LAN blinde (disponible chez un deta1llant).
Suivre toutes instructions d'installation Dans
le
cas contraire, cela pourrait annuler l'autorisat1on
FCC
a utiliser
cet
appareII.
4. PRECAUTION (Pour Bluetooth/Wi-Fi)
•
Af1n
de repondre aux exigences de conformite
FCC
sur !'exposition aux
RF,
une distance d'au
moins 20
cm
doit ~tre maintenue entre
cet
appareil
et
toutes les personnes.
• Cet appareil
amsi
que son antenna
ne
doivent pas se trouver a proximtte immediate,
ni
~tre
utilises
en
association avec une autre antenna ou
un
autre emetteur.
•
La
bande
5,
15-5,25 GHz est lim1tee uniquement a une utilisation en interieur.
5. NOTE
Ce
produit a
ete
teste
et
ii
est conforme aux limitations des dispositifs numeriques
de
Class
B,
en
vertu de
la
section 15 du reglement
FCC.
Ces limllatlons sont con9ues pour foumir une protection
raisonnable centre les interferences nocives sur une installation residentielle.
Ce
produit genere, utilise
et
emet
de l'energie
de
rad1ofrequence
et
s'il n·est pas 1nstalle
et
utilise conform8ment aux instructions,
ii
peut entrainer des interferences nefastes avec les
communications radio. Toutefois. nous ne pouvons pas garantir l'absence d'interf6rence avec
certaines 1nstallat1ons.
En
cas d'interferences nefastes sur
la
reception
de
la
radio ou
de
la
television
provoquees par cet appareil, survenant
au
moment
de
l'activat1on ON ou
de
la
desact1vat1on OFF,
nous conseillons a l'utilisateur d'essayer de corriger !'interference comme suit:
• Reorienter ou deplacer l"antenne.
• Augmenter
la
distance entre l'Squipement
et
le r8cepteur
• Connecter l'appare1I a
la
prise murale d'un circuit different de
celu1
du recepteur.
• Consulter un revendeur local agree pour
la
distribution de ce type de produit ou un technic1en
radio
/TV
experimente.
D&M Holdings Inc.
5431
10655 00AM
VQE1A1129Z
IC
Information (For Canadian customers)
1. PRODUCT
CONTAINS TRANSMITTER MODULE
IC:
4711A-AIOS40S
This product complies
with
RSS-247
of
Industry Canada. Operation is subject to the following
two
conditions: (1) this product may not cause harmful interference, and
12)
this product
must
accept
any interference received,
1nclud1ng
interference that may cause undesired operation. This Class B
digital apparatus complies
with
Canadian ICES-003.
2. CAUTION
To
reduce potential radio interference to other users, the antenna type and its
gam
should be so
chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for
successful communication.
(I)
the device for operation in the band 5,150 - 5,250
MHz
is
only for indoor use
to
reduce the
potential for harmful interference to co-channel mobile satellite systems.
Iii) high-power radars are allocated as primary users
(1.e.
priority users)
of
the bands 5,250 - 5,350
MHz
and 5.650 - 5,850 MHz and that these radars could cause interference and/or damage
to
LE-LAN devices.
Informations sur
IC
(pour les clients canadiens)
1.
APPAREIL
CONTIENT MODULE EMETTEUR
IC
: 4711A-AIOS40S
Cet appareil est conforme a
la
norme CNR-247
du
Canada. L'utilisat1on de ce
d1spos111f
est autorisee
seulement aux deux conditions suIvantes:
(1)
ii
ne doit pas produire
de
brouillage, et
12)
l'utilisateur
du
dispositif doit ~tre
prM
a accepter tout brou1llage radioelectrique re,u,
m~me
sI
ce brouillage est
susceptible de
compromettre
le fonctionnement du dispositif. Cet appareil numerique de
la
classe
B est conforme a
la
norme NMB-003 du Canada.
2. ATTENTION
Afin de r8duire
le
risque d'interf8rence aux autres utilisateurs,
ii
taut choisir le type d'antenne
et
son
gain de fa9on a ce que
la
puIssance isotrope rayonnee equivalente (p.i.r.e.) ne soIt pas superieure
au
niveau requis pour l'obtention d'une communication satisfaisante.
(i)
les dispositifs fonctionnant dans
la
bande 5 150 - 5 250 MHz sont reserves uniquement pour
une utilisation a l'int8rieur afin de r8duire les nsques de brouillage pr0Judiciable aux syst9mes
de satellites
mob11es
utihsant les m~mes canaux.
(ii)
De
plus, les utilisateurs devraient aussi ~tre avises que les utilisateurs de radars de haute
puissance sont designes utilisateurs princ1paux
(c.-a-<l.,
qu'ils
ont
la
priorite) pour les bandes 5
250 - 5 350
MHz
et
5 650 - 5 850 MHz
et
que ces radars pourraient causer du brouillage et/ou
des dommages aux dispositifs LAN-EL.
For
Canadian
customers
I
Pour
les
clients
canadiens:
CAN ICES-3 (Bl /
NMB
-3 (Bl
"'
for
indoor
use
only
·
0
RF
Exposure Information
This equipment complies
with
FCC
/
IC
radiation exposure limits set forth for
an
uncontrolled
environment and
meets
the
FCC
radio frequency
(RF)
Exposure Guidelines
In
Supplement C to
OET65 and RSS-102
of
the
IC
radio frequency
(RF)
Exposure rules. This equipment has very
low
levels
of
RF
energy that are deemed to comply
without
testing
of
specific absorption ratio (SAR).
Cet 8quipement est conforme aux normes d'exposition aux radiations
FCC/
IC
d8finies pour
un
environnement non contr018
et
satisfait les directives d'expos1tion a
la
radiofr8quence
(AF)
dans
le supplement C des OET65
et
RSS-102 des regles d'exposition a
la
frequence radio
(RF)
IC.
Cet
8quipement a de tres faibles niveaux d'Snergie
AF
qui sont jug8s conformes sans test de taux
d'absorption specifique
(SAR)