Owners Manual

Playing digital input
.
OPT/COAX
1
Prepare for playback.
Check the connection, then turn on this units. (“Connecting to a
device with digital audio output connectors” (v p. 29))
2
Press OPT/COAX to switch the input source to “Optical
1”, “Optical 2” or “Coaxial”.
3
Play the component connected to this unit.
0
If the sampling frequency cannot be detected, “Signal Unlock” will
be displayed.
0
“Unsupported” is displayed when audio signals that are not
supported by this unit are input.
Contents Connections Playback Settings Tips Appendix
60
Front panel Rear panel
Remote control
unit
Index