User guide

52
Network and Operations
Network functionality and Operation
The network functionality of the Marantz Professional PMD580
allows you to archive recorded files in a shared folder in
the network and provide you with a simple web-based user
interface to control the PMD580 over your network.
The PMD580 has following functions.
1. Archive recorded files in a network drive
The PMD580 automatically archive the recorded audio
files in a shared folder on a network computer.
See page 39 for S14 Archive menu in system preset
settings.
2. Web remote control
The PMD580’s internal Web GUI allows any internet
ready computer on the network to have control of the
PMD580’s features. Record features on the front panel
and in the preset menu can be controlled by the unit’s
web remote.
■ How to hook up the PMD580 to your
network
Connect the PMD580 to the network using the Ethernet RJ-45
terminal (LAN) on the rear of the PMD580.
You can connect the PMD580 in any of the following ways:
• Through a corporate network
• Through a home network using a router or switch
• Directly to a computer using an Ethernet cross-over
cable.
The PMD580 supports the automatic acquisition of
IP addresses from a DHCP(Dynamic Host Configuration
Protocol) server. More often than not, you can connect your
PMD580 to a corporate network or home network in three
easy steps:
1. Before connecting the PMD580, set the preset
setting of “S06 IP Address“ to Auto (default).
It means that the PMD580 will attempt to acquire the
network settings from a DHCP server in the network.
2. Connect a network cable to the Ethernet RJ-45 jack
on the rear of the PMD580. And connect the other
end of the network cable to an Ethernet hub or
switch.
LAN/Intranet
Ethernet switching hub
PMD580
SERIAL NO.
IN
IN
OUT
OUT
SPDIF
SPDIF
REMOTE
REMOTE
LAN
LAN
RS232C
RS232C
PMD580
Ethernet hub or switch
If you are not connected to a network, use a cross-over
Ethernet cable to connect the PMD580 directly to your
computer.
cross-over cable
PMD580
■