User guide

47
4. Set the week or day.
• While the “REPEAT” is selected, week appears in the
display.
• While the “1” is selected, date appears in the display.
– The date order depends on the date form in the Preset
Menu.
– Press the Jog wheel to accept the selection.
5. Set the start and end time.
[Week] [Start ] [ End ]
[Day] [ Start ] [End ]
• If the end time is earlier than the start time, the day
of the end time will be set to the next day of the start
time.
• The event can not take the same time with another
event. When the same time zone is set, “Duplication”
is displayed 2 seconds, the input is cancelled, then
the display goes back to the Rec Schedule Time set
menu.
• Turn the Jog wheel to select the week, start time, and
end time. Then press the Jog wheel to set the input
and go to the next. The setting item will flash.
• Time display(12H or 24H) depends on the “Time form”
in the Preset Menu.
A(P) is attached while in 12H AM(PM).
6. Input the filename User Area.
• User area can be set for each event.
7. Write the schedules.
• Press the PLAY/PAUSE button to write the schedules.
“Executing” appears during writing. “Completed”
appears 1 second after the writing is completed.
• Press the STOP/CANCEL button to cancel any
schedule input and return to stop mode.
Notes:
Maximum event count is 30.
If a single scheduled recording (set as “1”) is completed, the
scheduled time is cleared.
If the STOP/CANCEL button is pressed while selecting
program number, the unit returns STOP.
If the STOP/CANCEL button is pressed other than selecting
program number, the unit returns number selection.
8. Delete the schedule.
• Turn the Jog wheel to select the program number.
• Press the SHIFT button.
“Del” flashes in the display.
• Press the Jog wheel.
“Delete OK” appears and “OK” flashes.
• Press the Jog wheel.
“Executing” appears in the display.
The display returns to program number selection.
• Press the STOP/CANCEL button to return to stop
mode.
•
•
•
•