User guide

35
(S07) Show IP
The Show IP menu allows you to display the IP address of the
PMD580.
1. While in stop, press the MENU/STORE/UTILITY
button.
2. Turn the Jog wheel until “Show IP” appear in the
display.
3. Press the Jog wheel.
The Display switches to the IP address.
4. Press the STOP/CANCEL button to exit the Menu.
(S08) Subnet mask
The Subnet mask menu allows you to set the subnet mask to
identify the subnetwork.
Selection Range Description
000.000.000.000
- 255.255.255.000
• Turn the Jog wheel to up or down 1 step.
• Turn with Press the Jog wheel to up or
down 10 steps.
1. From stop, press the MENU/STORE/UTILITY button.
2. Turn the Jog wheel until “Subnet mask” is displayed.
3. Press the Jog wheel while IP address is displayed.
The first character of the IP address will flash.
4. Turn the Jog wheel to select the characters.
5. When correct, press the Jog wheel.
The next position will flash.
Repeat steps 4 and 5 until all Subnet mask characters
are correct.
6. Press the MENU/STORE/UTILITY button to save the
changes, or press the STOP/CANCEL button to exit
MENU mode without saving any changes.
7. Display returns to stop mode.