User guide

17
Record status and Operation
Status Operation
STOP • From 10 seconds before Scheduled start time,
1) “Rec Scheduled” is displayed.
2) Countdown starts.
3) Front keys are locked.(Unlocked by SHIFT+DISPLAY)
• The Record starts when the scheduled time comes.
PLAY /REC STOP
Rec Standby • From 10 seconds before Scheduled start time,
1) “Rec Scheduled” is displayed.
2) Countdown starts.
3) Front keys are locked.(Unlocked by SHIFT+DISPLAY)
• The Recorded starts when the scheduled time comes.
• The record data are saved in a file selected in standby mode.
Rec Pause • From 10 seconds before Scheduled start time,
1) “Rec Scheduled” is displayed.
2) Countdown starts.
3) Front keys are locked.(Unlocked by SHIFT+DISPLAY)
• The Record starts when the scheduled time comes.
• The recorded data are saved in the next file selected in REC PAUSE mode.
REC • From 10 seconds before Scheduled start time,
1) “Rec Scheduled” is displayed.
2) Countdown starts.
3) Front keys are locked.(Only the STOP, REC PAUSE button works.)
• The Record starts when the scheduled time comes.
• The recorded data are saved in a new file.(Same operation as Auto Track)
PLAY, SEEK –/+ • From 10 seconds before Scheduled start time,
1) “Rec Scheduled” is displayed.
2) Countdown starts.
3) Front keys are locked.(Unlocked by SHIFT+DISPLAY)
• The Record starts when the scheduled time comes.
FWD, RWD • From 10 seconds before Scheduled start time,
1) “Rec Scheduled” is displayed.
2) Countdown starts.
3) Front keys are locked.(Unlocked by SHIFT+DISPLAY)
• The Record starts when the scheduled time comes.
• Preset items are saved in the EEPROM and setting items are cancelled.
PLAY PAUSE
Preset MENU
USB mode • “Can’tSchedRec” is displayed 3 seconds when the scheduled time comes.
• “DidntSchedRec” is displayed 3 seconds after the USB cable is disconnected.
Web remote
Serial remote
Parallel remote
• From 10 seconds before Scheduled start time,
1) “Rec Scheduled” is displayed.
2) Countdown starts.
3) Front keys are locked.(cannot be unlocked during countdown.)
• The unit sends back “busy” or “nack” after the control command is received.
• The operation depends on the unit’s status while using Web remote.
During Archive
(Stop)
• From 10 seconds before Scheduled start time,
1) “Rec Scheduled” is displayed.
2) Countdown starts.
• The unit stops archiving and starts recording when the start time comes.
Notes:
The operation during recording depends on the preset menu.
(Auto Track, Pre Record, Silent Skip,…)
If the end time of one scheduled recording is the same as the start time of another scheduled recording, the recording continues and a
new file starts like Auto Track recording.
•
•