Manualshelf

User manual

ManualsBrandsMARANTZ ManualsHi-Fi ComponentsStereo amplifier PM5005 2 x 55 W Black Speaker A/B circuit
31323334353637383940
o
No sound comes out
Symptom Cause / Solution Page
No sound comes out of
speakers.
0
Check the connections for all devices. 16
0
Insert connection cables all the way in. －
0
Check that input connectors and output connectors are not reversely connected. －
0
Check cables for damage. －
0
Check that speaker cables are properly connected. Check that cable core wires come in contact with the
metal part on speaker terminals.
17
0
Securely tighten the speaker terminals. Check speaker terminals for looseness. 17
0
Check that the proper input source is selected. 26
0
Adjust the master volume. 26
0
Cancel the muting mode. 26
0
Check the settings of the SPEAKERS A/B button. 26
o
Desired sound does not come out
Symptom Cause / Solution Page
No sound comes out of a
specific speaker.
0
Check that speaker cables are properly connected. 17
0
Adjust the BALANCE control knob. 26
The left and right of stereo
sound is reversed.
0
Check whether the left and right speakers are connected to the correct speaker terminals. 17
Contents Connections Playback
Settings
Tips Appendix
38
Front panel Rear panel
Remote control
unit
Index