Operation Manual

25
Vorbereitung Anschlüsse Wiedergabe Einstellungen Tipps Anhang
DEUTSCH
• RMS-Leistungsausgabe:
(20Hz – 20kHz, gleichzeitige Ansteuerung
beider Kanäle)
90W × 2 (8Ω/Ohm)
140W × 2 (4Ω/Ohm)
• Gesamtklirrfaktor:
(20Hz – 20kHz, gleichzeitige Ansteuerung
beider Kanäle, 8Ω/Ohm)
0,05%
• Ausgangsbandbreite: (8Ω/Ohm, 0,05%) 5Hz – 40 kHz
• Frequenzgang: (CD, 1W, 8Ω/Ohms Last) 5Hz – 100 kHz ±3dB
• Dämpfungsfaktor: (8Ω/Ohm, 20Hz − 20kHz) 100
• Eingangsempfindlichkeit/Eingangsimpedanz
PHONO (MC): 270µV / 100Ω/Ohm
PHONO (MM): 2,7 mV / 47kΩ/kOhm
CD/LINE: 240mV / 20kΩ/kOhm
P. DIRECT IN: 1,7V / 20kΩ/kOhm
• Ausgangsspannung/Ausgangsimpedanz
PRE OUT: 1,7V / 220Ω/Ohm
• Maximal zulässiger Eingangspegel PHONO
(1 kHz)
MC: 15 mV
MM: 150 mV
• RIAA-Abweichung: (20Hz – 20kHz) ±0,5dB
• Signal-Rauschabstand (IHF-A, 8Ω/Ohm)
PHONO (MC): 75dB (0,5mV Eingang, 1W Ausgang)
PHONO (MM): 86dB (5 mV Eingang, 1W Ausgang)
CD/LINE: 106dB (2 V Eingang, Nennausgang)
• Klangregelung
BASS (50Hz): ±10dB
TREBLE (20kHz): ±10dB
• Spannungsversorgung: 230V Wechselstrom, 50/60Hz
• Leistungsaufnahme (EN60065): 220W
• Leistungsaufnahme im Bereitschaftsmodus: 0,2 W
Änderung der technischen Angaben und des Designs zum Zwecke der Verbesserung ohne
Ankündigung vorbehalten.
Technische Daten
v A
Anschluss
5.1-Mehrkanal-Wiedergabe ······························ 12
Endverstärker ··················································· 14
Fernbedienungsanschlüsse ····························· 15
Flexibles Steuerbussystem (F.C.B.S.) ··············· 10
Lautsprecher ······················································ 8
Netzkabel ························································· 15
Recorder ···························································· 9
Vollständiger Stereo-Doppelverstärkermodus
(Bi-Amp) ····························································11
Vorverstärker ···················································· 14
Wiedergabegerät ··············································· 8
Anschlusskabel ···················································· 7
Auswählen der Eingangsquelle ·························· 16
Auswählen des Tonabnehmers: MM/MC ··········· 24
v E
Einschalten des Geräts ······································ 16
Einstellen der Lautstärke ···································· 16
Einstellen des Klangs ········································· 17
v F
Fehlersuche ························································ 20
Fernbedienung ····················································· 6
Einlegen der Batterien ······································· 2
v L
Lautsprecher-Impedanz ······································ 24
v R
Rückseite ····························································· 5
v S
Standby-Automatik-Modus ································· 19
v T
Tipps ··································································· 20
v U
Überlastschutz ··················································· 24
v V
Vorderseite ··························································· 4
Vorübergehendes Ausschalten des Tons ············ 17
v Z
Zubehör ································································ 1
Index
2.PM14S1N_DEU_1st_0708.indd 25 2013/07/11 19:15:18