Owner's Manual

FEATURES PM-10
Channels 2
Current Feedback Topology •
Full balanced circuitry architecture •
Dual Mono Power Amp construction •
Phono EQ Constant Current Feedback
HDAM version SA3, SA2
Power Transformer Toroidal and 2 x SMPS
High Grade Audio Components •
Customized Components •
Symmetric PCB Layout •
Aluminum extrusion heat sink • (Separate)
Copper plated chassis •
INPUTS/OUTPUTS
Audio Inputs 7
Phono Input: MM / MC • / •
Audio Outputs 1
Balanced In / Out 2 / -
Power Amp IN •
Gold Plated Cinch • / CD and Phono nickle-plated
Speaker Terminals: Marantz SPKT-100+
Number of terminals 4
D-Bus •
Floating Control Bus (3.5 mm mono jack x 2) •
Headphone Out •
SPECIFICATIONS
Power Output (8 / 4 Ohm RMS) 200 W / 400 W
Frequency Response 5 Hz - 50 kHz
Total Harmonic Distortion 0.005 %
Damping Factor 500 dB
Input Sensitivity: MM 2.6 mV / 47 kohm
Input Sensitivity: MC
280 μV / 33 ohm (MC-LOW)
280 μV / 133 ohm (MC-HIGH)
Signal to Noise Ratio: MM/MC 88 / 76 dB
Input Sensitivity: High level 440 mV / 20 kohm
Input Sensitivity: Balanced High level 880 mV / 40 kohm
Signal to Noise Ratio: High level 111 dB (2V input/rated output)
Input Sensitivity: Power Amp IN 1.5 V / 20 kohm
Signal to Noise Ratio: Power Amp IN 113 dB
OTHERS
Linear Drive Power Supply • (pre-amplifier stage)
Liniear volume control •
Bi-AMP and Multichannel option •
Schottky diodes •
Input buffer amp all inputs
System block shielding: Copper / metal / none • / - / -
Double Layer Bottom Plate •
Low noise LCD display •
Power Amp •
5mm aluminum top plate •
GENERAL
Available color: Black •
Metal Front Panel •
Power Consumption in W 270
Standby Consumption in W 0.3
Auto Power off •
Detachable Power Cable •
Remote Control RC004PMSA
System Remote Function •
Maximum Dimensions (W x D x H) in inches 17.3 x 17.8 x 6.6
Weight in lbs 47.4
SPECIFICATIONS
7