Specifications

Current feedback amplifi er circuit
The current feedback amplifier circuit is used in
preamps and power amps of all of Marantz’s Hi-Fi
amps. The circuit is high-speed, low-distortion, and
very stable and faithfully amplifies the wide range
signal from the CD player to reproduce a natural
sound fi eld space.
The HDAM-SA2 high-speed voltage amplifi er module
used as a buffer amp in the analog output circuit
is the same one employed in the flagship SA-7S1.
This propriety Marantz circuit technology achieves
both high speed and low distortion. The audio circuit
features the same length for the right and left
channels, a thoroughly parallel layout, and improved
channel separation and spatial expression capability.
High-sound quality analog audio circuit
using HDAM-SA2
The CS4392 D/A converter made by Cirrus Logic has
proven itself in many Marantz CD players. The dynamic
range (114 dB) and THD+N (-100 dB) high-performance
produces a high-resolution, rich sound.
Cirrus Logic CS4392 high-performance
D/A converter
Other Features

Wireless remote controller also controls
Marantz amps

Remote control jacks (RC-5)

Automatic Music Scan (AMS) playback

Quick replay can be freely set in the
5 to 60 sec range

±12 step pitch control

CD-R/CD-RW playback

CD text display

Automatic Standby Mode

Wireless remote controller included

Detachable Power Cord
New-generation integrated amplifi er greatly improves sound quality using original circuit design technology
and the latest sound quality boosting components.
The CD5004 was acclaimed for texture and sound quality that exceed class conventionality.
That appeal has been improved upon to become the standard of the latest CD players.
Phono Equalizer supports MM cartridge
This connects directly to your analog player to easily
enjoy your records.
Fully discrete amp circuit and input
buffer circuit
The isolated block configuration for the preamp,
power amp, and tone control are inherited from high-
end models. The power amp has a fully discrete
confi guration to provide high power and high speed.
An active filter is employed for the tone control to
focus on sound quality. The frequency characteristics
at the center level are completely fl at. An input buffer
circuit is provided to improve the S/N ratio and
channel separation.
Other Features

3 sets of remote control codes

3 system AC outlets

Wireless remote controller included

Detachable Power Cord
Colors:
PM5004
INTEGRATED STEREO AMPLIFIER
Colors:
CD5004
CD PLAYER
RANGE SERIES
18