manual

MARANTZ GUIDE TO PC-AUDIO | NA-11S1 | 05.2013 | 10www.marantz.eu
SETUP FOR HIGH END AUDIO WITH
AUDIRVANA ON MAC
1. USB driver installation
2. Connect NA-11S1 by USB cable to the PC
3. Install Audirvana
4. Setup Audirvana
5. Enjoy
Attention it is MAC iso PC this time.
NOTE: Screen shots on your MAC might look different depending
on software version. However setup will be similar as described
here.
1. USB-Driver installation
For Mac oper ation there is no dedicated driver installation required,
at least not for the NA-11S1. However this might be different for
other USB-DAC devices.
2. Connect NA-11S1 by USB cable to the PC
Connect the PC to NA-11S1 by a USB-A to USB-B cable and select
the PC input on the NA-11S1 by remote or input button on the front.
The Mac will au tomatically detect the new USB device.
3. Install Audirvana
The software can be downloaded as a trial version at the
www.audirvana.com site. After download just execute the
installation. Restart your computer and open the Audirvana
software.
4. Setup Audirvana player
Open your Audirvana Music Player and select Audirvana Plus à
and Preferences
A setup box with general setting will be opened.
Select the Audio system then select Preferred Audio Device click
on Change
Select USB High Speed Audio, this is the NA-11S1. This will only
appear if the NA-11S1 is connected and set to PC input.
White paper