Owner's Manual
Table Of Contents
- Owners Manual
- Reset
- Resetting Network Settings
- Table of Contents
- Compatibility
- Features
- Supplied Accessories
- Parts & Controls
- Connections
- Cables Used for Connections
- Connecting an Amplifier
- Connecting to a Device with Digital Audio Input Connectors
- Connecting to a Device with Digital Audio Output Connectors
- Connecting a PC or Mac
- Connecting a USB Memory Device to the USB Port
- Connecting to a Home Network (LAN)
- Connecting an External Control Device
- Connecting the Power Cord
- Playback
- Settings
- Tips
- Troubleshooting
- Glossary
- Specs
- Index
- Quick Start Guide
- Spec Sheet
- Spotify
- Scan of CD-ROM
- Warranty
n
Share Wi-Fi setting from an iOS device
Use your iOS device (iPhone/iPod/iPad) to connect to the network. By
connecting your iOS device to this unit using Wi-Fi, the unit can be
automatically connected to the same network as your device.
1. Select “Share Wi-Fi setting from an iOS device” on the display.
2. Check that your iOS device is connected to the wireless LAN (Wi-
Fi) router and select “Marantz ND8006” from “SET UP NEW
AIRPLAY SPEAKER...” at the bottom of the Wi-Fi configuration
screen of your iOS device.
3. Tap “Next” on the screen of the iOS device.
0
The iOS device firmware version needs to support iOS 7 or later.
n
WPS Router
Use a WPS-compatible router to connect using the push button
method.
1. Select “WPS Router” on the display.
2. Switch to the WPS mode by pressing the WPS button of the router
you wish to connect to.
0
The time for pressing the button varies depending on the router.
3. Press ENTER within 2 minutes.
Contents
Connections Playback Settings Tips Appendix
95
Front panel Rear panel
Remote control
unit
Index