Owner's Manual
Table Of Contents
- Owners Manual
- Reset
- Resetting Network Settings
- Table of Contents
- Compatibility
- Features
- Supplied Accessories
- Parts & Controls
- Connections
- Cables Used for Connections
- Connecting an Amplifier
- Connecting to a Device with Digital Audio Input Connectors
- Connecting to a Device with Digital Audio Output Connectors
- Connecting a PC or Mac
- Connecting a USB Memory Device to the USB Port
- Connecting to a Home Network (LAN)
- Connecting an External Control Device
- Connecting the Power Cord
- Playback
- Settings
- Tips
- Troubleshooting
- Glossary
- Specs
- Index
- Quick Start Guide
- Spec Sheet
- Spotify
- Scan of CD-ROM
- Warranty
o
Audio device settings (Mac OS only)
A
With the unit power off, connect the unit and Mac using a USB cable
(sold separately).
0
For the connection procedure, refer to the “Connecting a PC or Mac”
section. (v p. 24)
B
Press POWER X.
C
Press USB-DAC to switch the input source to “USB-DAC”.
D
Move the cursor to “Go” on the computer screen, and then click
“Utilities”.
0
The utility list is displayed.
E
Double-click “Audio MIDI Setup”.
0
The “Audio Devices” window is displayed.
F
Check that “Use this device for sound output” is checked in “ND8006”.
0
If a different device is checked, select and “Secondary click” on
“ND8006”, and then select “Use this device for sound output”.
.
⑥
ND8006
ND8006
Contents
Connections Playback Settings Tips Appendix
69
Front panel Rear panel
Remote control
unit
Index