Owner's Manual
Table Of Contents
- Owners Manual
- Reset
- Resetting Network Settings
- Table of Contents
- Compatibility
- Features
- Supplied Accessories
- Parts & Controls
- Connections
- Cables Used for Connections
- Connecting an Amplifier
- Connecting to a Device with Digital Audio Input Connectors
- Connecting to a Device with Digital Audio Output Connectors
- Connecting a PC or Mac
- Connecting a USB Memory Device to the USB Port
- Connecting to a Home Network (LAN)
- Connecting an External Control Device
- Connecting the Power Cord
- Playback
- Settings
- Tips
- Troubleshooting
- Glossary
- Specs
- Index
- Quick Start Guide
- Spec Sheet
- Spotify
- Scan of CD-ROM
- Warranty
I
Click “Yes”.
.
o
5
With the unit power off, connect the unit and PC using
a USB cable (sold separately).
0
For the connection procedure, refer to the “Connecting a PC or
Mac” section. (v p. 24)
6
Press POWER X.
0
When the unit power is turned on, the PC automatically finds and
connects to the unit.
7
Press the input source select button (USB-DAC) to
switch the input source to “USB-DAC”.
8
Checking the installed driver.
A
Click the “Start” button and click “Control Panel” on the PC.
0
The control panel setting list is displayed.
B
Click the “Sound” icon.
0
The sound menu window is displayed.
C
Check that there is a checkmark next to “Default Device” under in
“ND8006” of the “Playback” tab.
0
When there is a checkmark for a different device, click ND8006
and “Set Default”.
Contents Connections Playback Settings Tips Appendix
66
Front panel Rear panel
Remote control
unit
Index