Owner's Manual
Table Of Contents
- Owners Manual
- Reset
- Resetting Network Settings
- Table of Contents
- Compatibility
- Features
- Supplied Accessories
- Parts & Controls
- Connections
- Cables Used for Connections
- Connecting an Amplifier
- Connecting to a Device with Digital Audio Input Connectors
- Connecting to a Device with Digital Audio Output Connectors
- Connecting a PC or Mac
- Connecting a USB Memory Device to the USB Port
- Connecting to a Home Network (LAN)
- Connecting an External Control Device
- Connecting the Power Cord
- Playback
- Settings
- Tips
- Troubleshooting
- Glossary
- Specs
- Index
- Quick Start Guide
- Spec Sheet
- Spotify
- Scan of CD-ROM
- Warranty
REMOTE CONTROL connectors
If this unit is connected to a Marantz amp, the amp can be controlled via
this unit using the HEOS App. Also, remote control signals received by the
amp can be used to control this unit. Next, configure the “Connection” and
“Setting”.
o
Connection
Use the supplied remote connector cable to connect the REMOTE
CONTROL IN connector of this unit to REMOTE CONTROL OUT
connector of the amplifier.
o
Setting
Turn the EXTERNAL/INTERNAL switch on the unit to “EXTERNAL”.
0
This setting will disable remote sensor reception of this unit.
0
To operate the unit, point the remote control at the remote sensor of
the amplifier.
0
To use this unit by itself without connecting an amplifier, turn the switch to
“INTERNAL”.
This unit
Amplifier
Remote
connector cable
(supplied)
Set to
“EXTERNAL”.
Contents Connections Playback Settings Tips Appendix
29
Front panel Rear panel
Remote control
unit
Index