Owner's Manual
Table Of Contents
- Owners Manual
- Reset
- Resetting Network Settings
- Table of Contents
- Compatibility
- Features
- Supplied Accessories
- Parts & Controls
- Connections
- Cables Used for Connections
- Connecting an Amplifier
- Connecting to a Device with Digital Audio Input Connectors
- Connecting to a Device with Digital Audio Output Connectors
- Connecting a PC or Mac
- Connecting a USB Memory Device to the USB Port
- Connecting to a Home Network (LAN)
- Connecting an External Control Device
- Connecting the Power Cord
- Playback
- Settings
- Tips
- Troubleshooting
- Glossary
- Specs
- Index
- Quick Start Guide
- Spec Sheet
- Spotify
- Scan of CD-ROM
- Warranty
Cannot connect to a WPS Router.
0
Check that the WPS mode of the router is operating.
0
Press the WPS button on the router and then press the ENTER button within 2 minutes.
0
A router/settings that are compatible with WPS 2.0 standards are required. Set the encryption time to “None”, WPA-PSK (AES) or WPA2-PSK (AES).
(v p. 95)
0
If the router encryption method is WEP/WPA-TKIP/WPA2-TKIP, you cannot connect by using the WPS button on the router. In this case, use the “Auto-
Scan” or “Manual” method to connect.
Cannot connect to the network using iPhone/iPod touch/iPad.
0
Update the iPhone/iPod touch/iPad firmware to the latest version.
0
When configuring the settings via a wireless connection, iOS 7 or later needs to be supported.
Contents Connections Playback Settings Tips Appendix
121
Front panel Rear panel
Remote control
unit
Index