Owner's Manual

Variable Out
You can stop the circuit that outputs audio from the analog audio output
terminals (VARIABLE) of this unit. This prevents the audio signal output
from the analog audio output terminals (FIXED) from being affected. If you
will not use the analog audio output terminals (VARIABLE), turning this
setting off enables a higher quality of sound.
On
(Default):
Enables variable audio output.
Off: Disables variable audio output.
Volume Limit
Make a setting for the maximum volume of the audio signal output from the
analog audio output terminals (VARIABLE).
Off
(Default):
Do not set a maximum volume.
95 (+1dB) / 90 (-4dB) / 85 (-9dB) / 80 (-14dB)
Digital Out
Stopping digital audio output reduces a source of noise that affects sound
quality, enabling higher sound quality playback.
On
(Default):
Digital audio output is enabled.
Off: Digital audio output is disabled.
0
The “DIG. OUT OFF” indicator lights on the display when this setting is set to “Off”.
Phones
The headphones circuit operation can be stopped to minimize noise from
the headphones circuit which could interfere with the analog audio output
signal.
On
(Default):
Enable the headphones output.
Off: Disable the headphones output.
0
When not using headphones, you can enjoy higher quality sound with Off mode.
Contents Connections Playback Settings Tips Appendix
101
Front panel Rear panel
Remote control
unit
Index