Specifications

14
ENGLISH
Playable media
Discs
Playable discs
Playable
formats/
modes
Playable region
codes
Category
type
BD-Video,
BD-ROM,
BD-RE/
BD-R
z1,z2,z3
BDMV,
AVCHD
format
Include region
BD
AVCHD
DVD-Video
z1,z2
Video
mode
Include region
ALL
2
DVD
DVD-R
Video
mode,
AVCHD
format
–
DVD
AVCHD
DVD-RW
CD
CD-DA –
CD
CD-R
CD-RW
• Only BD-RE/-R, DVD-R/-RW and CD-R/-RW discs recorded in UDF or
ISO9660 format can be played back.
z1 BD-Video/DVD-Video discs may not operate as described in this
guide due to menu structure.
z2 The Blu-ray Disc player and BD-Video disc, and DVD player and
DVD-Video disc each have their region codes (code assigned for
each region). Playback is not possible if the codes do not match.
z3 This unit supports Ver 2.0 BD-ROM, Ver 3.0 BD-RE and Ver 2.0
BD-R.
The following discs will not play back on this unit.
• DVD+R/DVD+RW
• BD-RE Ver1.0 (BD disc with cartridge)
• BD-R/BD-RE in which BDAV is recorded
• HD DVD / DVD-RAM / DVD-Audio
• CDV (Only the audio part can be played)
• CD-G (Only the audio signals can be output)
• Non-standard CD (CD with copy protection, etc.)
• Unauthorised disc (Pirated disc)
• Disc with recording area less than 55 mm in diameter
• Hybrid disc
• Video Single Disc (VSD) / CVD / Video CD / Super Video CD /
Compact Disc-Interactive (CD-I) / Photo CDs / Super Audio CD
Setting the current time (24-Hour Display)
GExampleH Setting the current time to 10:15 am
1
Press POWER to turn on power to
the unit.
• If you perform operations on this unit, press
ON/STANDBY.
2
Press SETUP.
Various types of setting menus are
displayed.
• If you perform operations on this unit, press
and hold
MODE for 3 seconds and longer.
3
Use ui to select “CLOCK
SETUP”, then press ENTER or p .
S E T U P M E N U
C L O C K S E T U P
4
Use ui to set the “hours”.
C L O C K S E T U P
1 0 : 0 0
5
Press ENTER or p.
The “minutes” display fl ashes.
6
Use ui to set the “minutes”.
C L O C K S E T U P
1 0 : 1 5
7
Press ENTER or p.
The current time is set, and the normal
display reappears.
You can also perform the same operations as p on the remote control
unit with the INPUT button on this unit, respectively.
n Checking the current time when the power is on
Press CLOCK.
Press once more and the display returns to its original condition.
n Checking the current time when the power is
set to standby
Press CLOCK.
The current time is displayed for 10 seconds.
NOTE
The time cannot be set when in the standby mode. Turn on the power
fi rst.