Specifications

Getting Started
Basic
Connections
Advanced
Connections
Basic
Operations
Advanced
Operations
Other
setting
Settings
Other
information
Explanation
terms
Troubleshooting Specifi cations Index
11
Basic
Connections
ENGLISH
Connecting a wireless receiver (RX101)
By connecting a wireless receiver RX101 (sold separately) to this unit,
you can receive and playback audio signals from other devices using
the Bluetooth Communication Function.
• Use a Bluetooth device that is A2DP compatible (vpage 42
“A2DP”).
• You can also use wireless receiver RX101 as an external IR receiver.
• For instructions on the wireless receiver settings, refer to the
RX101’s operating instructions.
Wireless receiver RX101
Bluetooth device
( A2DP Compatibility)
Remote control unit
Remote control connection
The unit can be controlled using the remote sensor of RX101
connected to the unit. Be sure to set “IR=DISABLE” when controlling
in this way.
NOTE
When making this remote control connection, be sure to set the IR
switch of RX101 that is connected to the unit, to ON.
n Setting the remote control
1
Press ON/STANDBY to
set the unit to standby
mode.
2
Press and hold down
2 and then press ON/
STANDBY
.
“IR=ENABLE” or
“IR=DISABLE” on the
display.
3
Press ui to select “IR=DISABLE” or
“IR=ENABLE” and then press ENTER.
NOTE
The unit cannot be controlled using the remote controller while
“IR=DISABLE” is set.
Connecting the power cord
Power cord
(Supplied)
To household power outlet
(AC 230 V, 50 Hz)
NOTE
• Do not plug in the power cord until all connections have been
completed.
• Only use the supplied power cord.
• Be sure the power cord is unplugged from the power outlet before
connecting or disconnecting it to the AC IN.