User guide

ENGLISH

TROUBLESHOOTING

7 There’s no sound

Check your IS201 dock connector.

• Make sure the iPod is inserted properly in the dock connector.

• Make sure your iPod is playing.

• Make sure the cable plugs are pushed in all the way.

• Make sure the AC adapter is connected to a suitable wall outlet and connected to

IS201 dock connector.

Check the receiver or amp connected to IS201 dock connector.

• Make sure the power is turned on.

• Make sure the input is selected on the jack connected to your iPod.

• Make sure the volume control is not set too low.

7 The remote controller doesn’t control the iPod

Check your IS201 dock connector

• Make sure the iPod is inserted properly in the dock connector.

• Make sure there is nothing to block the infrared radiation between IS201 dock

connector and remote controller.

• Make sure you’ve selected the right mode for the remote mode switch on the rear of

IS201 dock connector.

• Make sure the remote control cable is connected properly.

7 There’s no control display on TV screen

Make sure the display mode (OSD/LCD) is set properly, or the selected mode is

suitable for the TV type. (

☞

p. 14)

SPECIFICATIONS

Power Supply ...........................................................................DC IN12V (AC ADAPTER)

Net weight (DOCK PART, CONNECTOR PART, including mains cord) ....................350g

Dimensions ........................................................................DOCK PART: 95

× 49 × 84mm

..........................................................CONNECTOR PART: 102

× 34 × 54mm

Terminals ......................S-video output

× 1, Analog Audio output × 1, Remote output × 1,

RS232C terminal

× 1, FLASHER IN terminal × 1

AC Adapter (Supplied)

Power Supply ............................................................AC100V – 240V (50Hz / 60Hz) 0.4A

Specifications subject to change without prior notice.

IS201E_01_Eng 06.4.27 4:49 PM ページ15