User guide

5Playing Discs
31
English
Film 1: Standard setting
Film 2: Setting for moving images
Film 3: Setting for still images
• DNR – Adjusts the amount of noise reduction
(NR) applied to the Y (brightness) component
• CNR – Adjusts the amount of noise reduction
(NR) applied to the C (color) component
• MNR – Adjusts mosquito noise occurring
around edges in MPEG-compressed video
• BNR – Adjusts block noise occurring in MPEG-
compressed video
• Sharpness High – Adjusts the sharpness of the
high-frequency (finely detailed) elements in the
picture
• Sharpness Mid – Adjusts the sharpness of the
mid-frequency (less detailed) elements in the
picture
• Detail – Adjusts how sharp edges appear in the
picture
• Brightness – Adjusts the image brightness
• Contrast – Adjusts the image contrast
• Chroma Level – Adjusts how saturated colors
appear
• Hue – Adjusts the overall color balance
between red and green
• Chroma Delay – Compensates for misalign-
ment of the Y (brightness) and the C (color)
components
• Gamma – Adjusts the brightness of the darker
images in the picture
• Black Setup – Corrects floating black color
• Lip Sync – Adjusts the time lag between the
audio signal and the video signal from 0 to 200
msec in 10 msec steps
• Initialize – Returns to the default values
5Press ENTER to save your changes.
Note
Pressing DISPLAY while the VIDEO ADJUSTMENT
screen is displayed shows one adjustment item, as
given below, so that you can adjust the item while
confirming its effect. Pressing DISPLAY again
returns to the former setting.
• The Lip Sync only works for analog sound. It
does not work for digital output/HDMI/i.LINK
output.
• Chroma Delay will not operate in Composite
Video out, S2 Video out and COMPONENT
Video out when Interlace is selected.